Hi all,
The problem I am going to describe occurs when using BRLTTY as a braille driver
for NVDA.
As it does not occur when simply running BRLTTY, I suppoe it has to do with
brlapi.
It occurs when using NVDA on a command prompt.
Every 10 seconds (about), I can hear the 2 beeps as if brltty would deconnect
from the terminal, then the 2 beeps indicating a reconnection.
Then the command prompt appears, displayed by BRLTTy itself, then NVDA regains
control on the terminal.
I can see that brltty takes control for a while sincee I don't use the same
translation table when under brltty and when under NVDA.
In BRLTTY 3.10, il only occurs when on a command prompt.
With pre 4.0 Samuel proposed a while ago, it happens on any window.
I also use a Papenmeier braillex 80, and this one does not have the problem.
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
