[quoted lines by james collins on 2009/10/01 at 08:54 -0400] >So if I open a shell and then set the stty parameters when I hit >return the changes I made wouldn't be in effect if I went to use my >serial device? Like if I tried the following:
They may still be in effect, or they may not, depending on the platform you're on. >$ stty ofill nl1 (or whataver the correct command is) >$ cat > /dev/cu.usbserial-FTKVMAFF I think you missed something I said. stty acts on whichever serial device is attached to its standard input. If you want to change the settings of the serial port to which your synthesizer is connected then you must redirect stty's standard input to that device. In other words, you need to do it like this: stty ofill nl1 </dev/cu.usbserial-FTKVMAFF -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | 2011 May 21 is the Day of Judgement. EMail: [email protected] | Canada K2A 1H7 | 2011 Oct 21 is the End of the World. http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
