On 10/16/10, Dave Mielke <[email protected]> wrote: > [quoted lines by Alex Hall on 2010/10/16 at 19:21 -0400] > >>> Why do you believe this to be the case? >>I went to bluetooth settings, then to the com ports tab. I see: >>com3 outgoing apex0000577 'serial' >>com4 incoming apex0000577 > > I've never seen a braille device operate this way before. It'd be > interesting > to see the output of an sdp (service discovery protocol) probe of the > device. I > don't know how to do that on Windows so do you happen to have a > Bluetooth-enabled Linux system which you can use to do it? If so, I'll tell > you > how. I do not have access to Linux, unfortunately. I tried removing the com ports used, then re-pairing and re-activating the bn/pc, but it set it up the same way as before (com3 and com4 both being used). I Googled sdp on windows, but all I got was a bunch of information on programming it, and I am not too familiar with Windows libraries. I will see if there is a Pythonic way to do this as I know Python pretty well, but I doubt it... If you have any other thoughts, please let me know! > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | 2011 May 21 is the Day of > Judgement. > EMail: [email protected] | Canada K2A 1H7 | 2011 Oct 21 is the End of the > World. > http://FamilyRadio.com/ | http://Mielke.cc/bible/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
-- Have a great day, Alex (msg sent from GMail website) [email protected]; http://www.facebook.com/mehgcap _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
