For the brave: In the past, you may recall that, in order to log certain kinds of data, users have been instructed to edit the values of flags within the source. This has now changed.
The -l (lowercase), or --log-level=, option now accepts a comma-delimited set of words. Each of these words can be, as before, a log level or number, but can also be the name of a log category. If, for example, you need to log the packets sent to and received from the braille device, you'd specify: -l debug,inpkts,outpkts The following log categories have been defined (so far): ingio inpkts outpkts brlkeys kbdkeys csrtrk routing In addition, the log level and log category settings can be changed while brltty is running. First, go into the Menu Options submenu and enable Show Advanced Submenus. You'll then see the Internal Parameters submenu in the root menu. Changes to the internal parameters aren't saved. -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | 2011 May 21 is the End of Salvation. EMail: [email protected] | Canada K2A 1H7 | http://Mielke.cc/now.html http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
