Hello, i have a alva bc640 with firmware 2.10.0 BT 1.20.0 The display works via usb and bluetooth.
In brltty.conf i have the following line braille-device usb:,bluetooth:00:A0:96:29C2:B2 With the command hcitool dev you can look if you find the bluetooth of the display with the command bluetooth-agent --adapter hci0 0000 00:A0:96:29:C2:B2 you will create a pairing with the alva bc640. I have done the above command only one time. You can look in the software of the bc640, if bluetooth is enabled. Regards Dietmar > [email protected] schrieb am 30.04.13: > Hi. I have an Alva bc640 just purchased used, and it is not > working on either usb or bluetooth. I haveheard that the firmware > 2.8.1 which I have does not work, but I wonder if anyone has > upgraded to 2.10 andis usingit successfully on usb? > As for bluetooth,, all I ever get is error 38, function not > implemented, along with messages from thekernel about tx timeouts. > Thanks in advance for any suggestions. > I am using gentoo unstable and brltty 4.5. > -- > Your life is like a penny. You're going to lose it. The question > is: How do > you spend it? > John Covici > [email protected] > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/b > rltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
