I made a fresh set up and it is identifying the device in the log. I see the following message in the log like the Driver is suspended after failing to opening the file. ( But the specified files are there).
The Key files are there in brltty\etc\brltty the exe is in brltty\bin brltty.exe: USB: ept=82 dir=in xfr=blk pkt=64 ivl=0ms brltty.exe: USB: ept=01 dir=out xfr=blk pkt=64 ivl=0ms brltty.exe: USB Language: 409 brltty.exe: USB: Manufacturer Name: Freedom Scientific brltty.exe: USB: Product Description: Focus 3 brltty.exe: USB: Serial Number: 0123456 brltty.exe: Event -> 00000184 brltty.exe: socket 1 created (fd 00000178) brltty.exe: socket creation finished: 1 brltty.exe: Detected Focus 14: cells=14, firmware=5.61 brltty.exe: Manufacturer: FREEDOM SCIENTIFIC brltty.exe: Model: Focus 14 brltty.exe: Firmware: 5.61 brltty.exe: Braille Display Dimensions: 1 row, 14 columns brltty.exe: regions: text=0.14 status=0.0 brltty.exe: shifts: full=14 half=7 vertical=5 brltty.exe: Key Bindings: focus_small brltty.exe: cannot open file: /etc/brltty/brl-fs-focus_small.ktb: No such file or directory brltty.exe: cannot open key table: /etc/brltty/brl-fs-focus_small.ktb brltty.exe: cannot open file: /etc/brltty/brl-fs-focus_small.txt: No such file or directory brltty.exe: cannot open help file: /etc/brltty/brl-fs-focus_small.txt brltty.exe: api link brltty.exe: Braille Driver: fs [FreedomScientific] brltty.exe: FreedomScientific Braille Driver: brltty.exe: Braille Device: usb: brltty.exe: Old Preferences File: /etc/brltty-fs.prefs brltty.exe: regions: text=0.14 status=0.0 brltty.exe: shifts: full=14 half=7 vertical=5 brltty.exe: setting braille firmness: 2 brltty.exe: beeper enabled brltty.exe: program exit event added: tunes brltty.exe: tone: msec=60 note=64 brltty.exe: tone: msec=100 note=69 brltty.exe: api unlink brltty.exe: beeper disabled brltty.exe: api link brltty.exe: program exit event added: speech-driver brltty.exe: no autodetectable speech drivers brltty.exe: checking for speech driver: no brltty.exe: initializing speech driver: no brltty.exe: Speech Driver: no [NoSpeech] brltty.exe: NoSpeech Speech Driver: brltty.exe: Speech Input: none brltty.exe: program exit event added: sessions brltty.exe: suspending braille driver brltty.exe: braille driver suspended brltty.exe: driver suspended brltty.exe: CreateFile -> 00000170 brltty.exe: socket 0 re-established (fd 00000170, was 00000160) brltty.exe: BrlAPI connection fd=00000160 accepted: \\.\pipe\BrlAPI0 brltty.exe: Received GetDriverName request on fd 00000160 brltty.exe: Received GetDisplaySize request on fd 00000160 brltty.exe: Received EnterRawMode request on fd 00000160 brltty.exe: USB: testing: vendor=0F4E product=0114 brltty.exe: USB: ept=82 dir=in xfr=blk pkt=64 ivl=0ms brltty.exe: USB: ept=01 dir=out xfr=blk pkt=64 ivl=0ms brltty.exe: USB Language: 409 brltty.exe: USB: Manufacturer Name: Freedom Scientific brltty.exe: USB: Product Description: Focus 3 brltty.exe: USB: Serial Number: 0123456 brltty.exe: Detected Focus 14: cells=14, firmware=5.61 brltty.exe: Manufacturer: FREEDOM SCIENTIFIC brltty.exe: Model: Focus 14 brltty.exe: Firmware: 5.61 brltty.exe: Braille Display Dimensions: 1 row, 14 columns brltty.exe: regions: text=0.14 status=0.0 brltty.exe: shifts: full=14 half=7 vertical=5 brltty.exe: Key Bindings: focus_small brltty.exe: cannot open file: /etc/brltty/brl-fs-focus_small.ktb: No such file or directory brltty.exe: cannot open key table: /etc/brltty/brl-fs-focus_small.ktb brltty.exe: cannot open file: /etc/brltty/brl-fs-focus_small.txt: No such file or directory brltty.exe: cannot open help file: /etc/brltty/brl-fs-focus_small.txt brltty.exe: driver resumed brltty.exe: driver suspended brltty.exe: Closing connection on fd 00000160 brltty.exe: Client on fd 00000160 did not give up raw mode properly brltty.exe: Trying to reset braille terminal brltty.exe: Reset failed. Restarting braille driver brltty.exe: api unlink brltty.exe: beeper enabled brltty.exe: tone: msec=60 note=64 brltty.exe: tone: msec=60 note=57 brltty.exe: reinitializing braille driver On Fri, Oct 4, 2013 at 12:15 PM, Siju Samuel <[email protected]>wrote: > In addition , when I do configure always I am getting a message as well. > I ignored that. > $ ./configure --with-braille-driver=fs,-all > ./prologue.sh: line 20: basename: command not found > checking build system type... i686-pc-mingw32 > > > On Fri, Oct 4, 2013 at 12:09 PM, Siju Samuel <[email protected]>wrote: > >> I was checking out the code in Linux and performing the autogen (step >> 1,2) . Then zip and get to windows/Mingw and then perform (3, to 5). >> This is because I was unable to get the autogen working in mingw quickly. >> So i hope that is not an issue. >> >> I think the braille exe running is the one expected. Probably will add >> some debug and see. >> >> *And irrespective of the device is connected or not I am getting the >> exact same error. *So it looks like it is built with a code which tries >> load the dll. >> >> I will try to do the entire set up in another machine and will get back >> on this. >> Thank you very much for your time and resolutions. >> >> Thanks, >> Siju samuel >> >> >> >> On Fri, Oct 4, 2013 at 11:07 AM, Dave Mielke <[email protected]> wrote: >> >>> [quoted lines by Siju Samuel on 2013/10/04 at 09:11 -0500] >>> >>> >It was still giving error .dll not found error while running. >>> >>> I just reverified what I believe your situation is. Notee that I'm using >>> "xx" >>> to mean the braille drivere of your choice. >>> >>> 1) Check out the latest code. >>> 2) ./autogen >>> 3) ./configure --with-braille-driver=xx,-all >>> 4) make >>> 5) Run brltty with: -bxx >>> >>> The result was that it didn't create a shared object (a DLL on Windows) >>> for the >>> xx braille driver, and it also didn't try to laod a shared object for it >>> at run >>> time. The braille device worked. >>> >>> This is making me wonder if you're running a different brltty executable >>> than >>> you think you are. Could you please verify that you're running the brltty >>> executable that you're building. >>> >>> > Note that I copied brltty.inf file from the brltty-4.5.tar as HotPlug >>> >directory was not there in the SCY check out >>> >>> The new location is Autostart/Windows/. >>> >>> -- >>> Dave Mielke | 2213 Fox Crescent | The Bible is the very Word >>> of God. >>> Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ >>> EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.com/ >>> _______________________________________________ >>> This message was sent via the BRLTTY mailing list. >>> To post a message, send an e-mail to: [email protected] >>> For general information, go to: http://mielke.cc/mailman/listinfo/brltty >>> >> >> >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
