Hi Mario, thanks for sending that key table along. What's throwing me off is, my focus 14 blue does not have wheels of any kind, they neither press, nor spin, nor... exist. :) According to FS, the wheels were replaced with panning rockers on the top surface of the display. But I am unable to navigate between lines of text because I am unable to perform the "wheel press" part of the keys required. Also, in the key table, what does GDF stand for? cheers
Rylan On 11/21/13, Mario Lang <[email protected]> wrote: > yRylan Vroom <[email protected]> writes: > >> I got the latest android APK for BRLTTY installed, and though I get >> some braille output when I fire up the accessibility service, I have >> no way of knowing what should do what, buttons wise. I took a gander >> at the BRLTTY driver documentation and found a bunch of focuses, none >> of which were the new focus 14 blue. I did some more research and >> discovered that someone had patched BRLTTY to run with the new focus >> (without the whizzy wheels), > > That would be me, somewhere around December 2012. > >> but when I tried to look up the "help screen" from within BRLTTY >> settings, all I got was a message stating that help wasn't >> available. > > I think this is an Android-specific deficientcy. > Dave: Is this correct? And if so, can we get Help working in the near > future on Android? > >> Can anyone help me out? I'm no programmer, but if such documentation >> doesn't in fact exist, I'd be happy to write it for inclusion into the >> next release. cheers > > The documentation (key bindings) for drivers is autogenerated. > So you dont need to write it. However, the autogeneration mechanism > needs to work on your platform of choice, which would be Android in this > case. > > In the meantime, here is the list of key bindings you are supposed to > see if you invoke the Help screen: > > Key Table: FreedomScientific Focus Blue > > Default Bindings > go to beginning of line: LeftWheelPress > go to end of line: RightWheelPress > go back after cursor tracking: LeftGdf > go to cursor: RightGdf > insert clipboard text at cursor: LeftGdf+RightGdf > go left one window: LeftAdvance > go right one window: RightAdvance > go to beginning of top line: LeftGdf+LeftAdvance > go to beginning of bottom line: LeftGdf+RightAdvance > go to top line: RightGdf+LeftAdvance > go to bottom line: RightGdf+RightAdvance > go up one line: LeftWheelUp > go down one line: LeftWheelDown > go left one window: RightWheelUp > go right one window: RightWheelDown > go up to nearest line with different content: LeftWheelPress+LeftWheelUp > go down to nearest line with different content: LeftWheelPress+LeftWheelDown > go left one character: RightWheelPress+RightWheelUp > go right one character: RightWheelPress+RightWheelDown > go up to previous command prompt: LeftAdvance+LeftWheelUp > go down to next command prompt: LeftAdvance+LeftWheelDown > go up to last line of previous paragraph: RightAdvance+LeftWheelUp > go down to first line of next paragraph: RightAdvance+LeftWheelDown > go up to nearest line with different highlighting: LeftGdf+LeftWheelUp > go down to nearest line with different highlighting: LeftGdf+LeftWheelDown > search backward for clipboard text: RightGdf+LeftWheelUp > search forward for clipboard text: RightGdf+LeftWheelDown > bring cursor to character: RoutingKey > place left end of window at character: LeftWheelPress+RoutingKey > describe character: RightWheelPress+RoutingKey > copy characters to clipboard: RoutingKey+RoutingKey > start new clipboard at character: LeftAdvance+RoutingKey > rectangular copy to character: RightAdvance+RoutingKey > append to clipboard from character: LeftGdf+RoutingKey > linear copy to character: RightGdf+RoutingKey > set skipping of blank windows on/off: Space+Dot1+Dot2 > set skipping of blank windows off: Space+Dot1+Dot2+Dot7 > set skipping of blank windows on: Space+Dot1+Dot2+Dot8 > set cursor visibility on/off: Space+Dot1+Dot4 > set cursor visibility off: Space+Dot1+Dot4+Dot7 > set cursor visibility on: Space+Dot1+Dot4+Dot8 > set display mode attributes/text: Space+Dot1+Dot4+Dot5 > set display mode text: Space+Dot1+Dot4+Dot5+Dot7 > set display mode attributes: Space+Dot1+Dot4+Dot5+Dot8 > set screen image frozen/unfrozen: Space+Dot1+Dot2+Dot4 > set screen image unfrozen: Space+Dot1+Dot2+Dot4+Dot7 > set screen image frozen: Space+Dot1+Dot2+Dot4+Dot8 > enter/leave help display: Space+Dot1+Dot2+Dot5 > set skipping of lines with identical content on/off: Space+Dot2+Dot4 > set skipping of lines with identical content off: Space+Dot2+Dot4+Dot7 > set skipping of lines with identical content on: Space+Dot2+Dot4+Dot8 > enter/leave command learn mode: Space+Dot1+Dot2+Dot3 > enter/leave preferences menu: Space+Dot1+Dot2+Dot3+Dot4 > restore preferences from disk: Space+Dot1+Dot2+Dot3+Dot4+Dot7 > save preferences to disk: Space+Dot1+Dot2+Dot3+Dot4+Dot8 > set autorepeat on/off: Space+Dot1+Dot2+Dot3+Dot5 > set autorepeat off: Space+Dot1+Dot2+Dot3+Dot5+Dot7 > set autorepeat on: Space+Dot1+Dot2+Dot3+Dot5+Dot8 > enter/leave status display: Space+Dot2+Dot3+Dot4 > set cursor tracking on/off: Space+Dot2+Dot3+Dot4+Dot5 > set cursor tracking off: Space+Dot2+Dot3+Dot4+Dot5+Dot7 > set cursor tracking on: Space+Dot2+Dot3+Dot4+Dot5+Dot8 > set attribute underlining on/off: Space+Dot1+Dot3+Dot6 > set attribute underlining off: Space+Dot1+Dot3+Dot6+Dot7 > set attribute underlining on: Space+Dot1+Dot3+Dot6+Dot8 > bring cursor to line: Space+Dot1+Dot2+Dot3+Dot6 > switch to previous virtual terminal: Space+Dot1+Dot2+Dot3+Dot6+Dot7 > switch to next virtual terminal: Space+Dot1+Dot2+Dot3+Dot6+Dot8 > set sliding window on/off: Space+Dot2+Dot4+Dot5+Dot6 > set sliding window off: Space+Dot2+Dot4+Dot5+Dot6+Dot7 > set sliding window on: Space+Dot2+Dot4+Dot5+Dot6+Dot8 > insert clipboard text at cursor: Space+Dot1+Dot3+Dot4+Dot6 > restore clipboard from disk: Space+Dot1+Dot3+Dot4+Dot6+Dot7 > save clipboard to disk: Space+Dot1+Dot3+Dot4+Dot6+Dot8 > set text style 6-dot: Space+Dot2+Dot3+Dot5 > set text style 8-dot: Space+Dot2+Dot3+Dot6 > backspace key: Space+Dot7 > enter key: Space+Dot8 > cursor-left key: Space+Dot3 > cursor-right key: Space+Dot6 > home key: Space+Dot2 > end key: Space+Dot5 > cursor-up key: Space+Dot1 > cursor-down key: Space+Dot4 > page-up key: Space+Dot2+Dot3 > page-down key: Space+Dot5+Dot6 > tab key: Space+Dot2+Dot3+Dot5+Dot6 > insert key: Space+Dot3+Dot5 > delete key: Space+Dot2+Dot5+Dot6 > escape key: Space+Dot2+Dot6 > backspace key: Space+LeftShift > enter key: Space+RightShift > function key: Space+RoutingKey > switch to virtual terminal: RightShift+RoutingKey > describe character: NavrowKey > go up to nearest line with less indent than character: LeftAdvance+NavrowKey > go down to nearest line with less indent than character: > RightAdvance+NavrowKey > place left end of window at character: LeftGdf+NavrowKey > cursor-up key: LeftRockerUp > cursor-down key: LeftRockerDown > go up one line: RightRockerUp > go down one line: RightRockerDown > braille keyboard dot1: Dot1 > braille keyboard dot2: Dot2 > braille keyboard dot3: Dot3 > braille keyboard dot4: Dot4 > braille keyboard dot5: Dot5 > braille keyboard dot6: Dot6 > braille keyboard dot7: Dot7 > braille keyboard dot8: Dot8 > braille keyboard space: Space > braille keyboard control: LeftShift > braille keyboard meta: RightShift > > -- > CYa, > ⡍⠁⠗⠊⠕ | Debian Developer <URL:http://debian.org/> > .''`. | Get my public key via finger mlang/[email protected] > : :' : | 1024D/7FC1A0854909BCCDBE6C102DDFFC022A6B113E44 > `. `' > `- <URL:http://delysid.org/> > <URL:http://www.staff.tugraz.at/mlang/> > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
