[quoted lines by Cheryl Homiak on 2014/08/22 at 14:22 -0500] >This old powerpc mac mini works fine with my usb-serial-using braillelite40. >But I was hoping to get my Hims Braille Edge to run on all my machines and >then use a usb switch to switch between machines. I tried using the braille >edge when I installed wheezy but it didn't seem to work so I used the >braillelite instead. Once installed, I still couldn't get the braillelite to >work with wheezy. After I had installed the latest version with git I tried >again and ran a debug log. It seems like the problem is a usb problem. I >wasn't running this on a switch but just with the braille edge plugged into >the linux machine. I'm attaching the log to see whether there is more I should >try to do. The braille edge is working fine on my Macs but I don't have >another linux machine to try it on so the problem could just be that I'm not >going to get it to work with the old powerpc machine. As I said before it >works with the braillelite and also a usb keyboard works with it. If anybody >has any suggestions or wants to just tell me this isn't going to work with >this machine, I'd appreciate the input.
The PowerPC might be running in big endian mode. I suppose it's possible that our code has some big endian glithces in it. Please log with: -ldebug,usb,inpkts,outpkts -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.com/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
