Yes, with the patch applied it works perfectly now. Thanks so much!

> -- 
> Cheryl 
> I tried and tried to turn over a new leaf.
> I got crumpled wads of tear-stained paper thrown in the trash! 
> Then God gave me a new heart and life:
> His joy for my despairing tears! 
> And now, every day:
> "This I call to mind, and therefore I have hope:
> The steadfast love of the Lord never ceases;
> his mercies never come to an end;
> they are new every morning;
> great is your faithfulness."
> (Lamentations 3:21-23 ESV)


> On Aug 24, 2014, at 9:41 PM, Dave Mielke <[email protected]> wrote:
> 
> [quoted lines by Cheryl Homiak on 2014/08/24 at 14:25 -0500]
> 
>> My problem arises with brltty on the powerpc machine running linux. When 
>> started it works. However when the switch is used to switch from that 
>> machine 
>> and then back again, the scanner and keyboard work but the braille display 
>> does not respond to the change to that machine though it responds to changes 
>> to all other machines. Once I have switched to the powerpc machine, the 
>> braille display still shows what was on the last machine but is no longer 
>> active with that machine either. However, as soon as I press a key (a 
>> keystroke not enter) on the keyboard also attached to the switch or if I 
>> type 
>> a character using a braillelite attached separately to the computer, then 
>> the 
>> Hims Braille Edge immediately becomes fully operable on the linux machine.
> 
> Please try this patch (attached as usb-1.patch).
> 
> -- 
> Dave Mielke           | 2213 Fox Crescent | The Bible is the very Word of God.
> Phone: 1-613-726-0014 | Ottawa, Ontario   | http://Mielke.cc/bible/
> EMail: [email protected] | Canada  K2A 1H7   | http://FamilyRadio.com/
> <usb-1.patch>
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: [email protected]
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty

Reply via email to