Actually what I want is a pass through of what is showing on the display to a text file that I can then load into the Braille dispay. FOr example LatexAccess suports outputting to BRLTTY, however although this is great when one is on-line and reading the Braille with the display directly connected, I can't keep an archiaval of the output. So I want to take the xame output that was coming to the Braille display and store it in a text file. -Kevin
> On Feb 24, 2015, at 7:35 PM, Lee Maschmeyer <[email protected]> wrote: > > Kevin, > > I'm not sure this is what you want, but you can use the brltty-ctb command to > translate a text file, including the output of "lynx -dump" or similar, into > grade 2 format. It can optionally reformat lines so they're all as full as > possible except the last line of each paragraph. > > HTH, > > -- > > Lee Maschmeyer > > "Never imagine yourself not to be otherwise than what it might appear to > others that what you were or might have been was not otherwise than what you > had been would have appeared to them to be otherwise." > --Lewis Carroll > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
