On Fri, Jul 17, 2015 at 11:29:56AM -0400, Dave Mielke wrote:
> [quoted lines by [email protected] on 2015/07/17 at 17:18 +0200]
>
> >> In my opinion, you didn't fix the first problem correctly. Rather than
> >> renaming
> >> brltty's ltr-latin.tti back to letters-latin.tti, you should really leave
> >> the
> >> provided tables alone and fix the include in my.ttb.
> >>
> >> The next problem you're running into is similar. Brltty's
> >> control-latin.tti has
> >> been renamed to ctl-latin.tti.
> >Id did that but it does not really help.
>
> Not exactly. The first problem is fixed, but, as observed above, still the
> wrong way. Also, the second problem isn't resolved - my.ttb is still
> including
> control-latin.tti whereas the new file name is ctl-latin.tti.
>
> Please rename letters-latin.tti back to ltr-latin.tti, and then fix the
> problems by updating the includes in my.ttb.
I did, it appeared that I also had to change de include for number-dot6
into num-dot6 and then it worked perfactly.
Thanks for you help.
>
> To see what each problem is, look in the log for "compiling text table". Read
> down from there, and fix each out-dated include until you get a clean text
> table compile. After you fix each problem, you should try again and look for
> more problems.
>
> --
> Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God.
> Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/
> EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/
> _______________________________________________
> This message was sent via the BRLTTY mailing list.
> To post a message, send an e-mail to: [email protected]
> For general information, go to: http://mielke.cc/mailman/listinfo/brltty
--
Adri P. van Bloois
Antonlaan 104 email: [email protected]
3701 VG Zeist voice: +31-(0)-30-6912741
The Netherlands fax: NONE
52 05'15.77"N 5 4'44.56"E
QTH-locater JO 22 OC
"Elegance is not a dispensable luxury but a factor that decides between
success and failure."
Edsger W. Dijkstra
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
