Just to verify: The two scroll keys on the left should go up/down by lines. The wto on the right should pan left/right by braille display widths. So, it should be:
Lef Up: up one line Left Down: down one line Right Up: pan left Right Down: pan right That's what I'm expecting. Is that the way it's working? To control brltty from the keypad on the PC's keyboard, you need to use the keypad keyboard table. You can do this from the command lonie with -kkeypad, and/or from brltty.conf with: keyboard-table keypad With the keypad keyboard table in use, you can do almost everything from the keypad. To go up/down by lines, for example, use KP0+KP8 / KP0+KP2. When a keyboard table is in use, help will cycle through both help screens (the one for the braille device and the one for the keyboard). -- Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/ _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
