Yes, that's the point... I get no log file if brltty is started bt systemd with "Type=forking".
I added api to the "log-level" option log-level debug,inpkts,outpkts,brlkeys,brldrv,api On Sat, Jul 30, 2016 at 12:37 PM, Dave Mielke <[email protected]> wrote: > [quoted lines by Michael Katzmann on 2016/07/30 at 11:59 -0400] > > >I finally got it by changing the option from "Type=forking" to > "Type=idle" in > >the [Service]" section of the service definition file. > > Then something else must be worng. With Type=forking, what does the log > contain > and what does systemctl status say? > > >here are the two logs, one from boot (with no responsiveness from the > braille > >keys) and one after restart of the service where it does. It looks like > brltty > >is throwing away the input for the braille keys for some reason (sees dot > >three but treats it as a NOOP)... > > Please try also enabling the api log category. > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
2016-07-30@16:50:15.252 [brltty] pushed command environment: initial 2016-07-30@16:50:15.252 [brltty] BRLTTY 5.2dev rev BRLTTY-5.1-794-g565e9b1b [http://brltty.com] 2016-07-30@16:50:15.254 [brltty] program exit event added: pid-file 2016-07-30@16:50:15.255 [brltty] program exit event added: screen-data 2016-07-30@16:50:15.255 [brltty] Working Directory: / 2016-07-30@16:50:15.255 [brltty] Writable Directory: /var/run/brltty 2016-07-30@16:50:15.255 [brltty] Configuration File: /etc/brltty.conf 2016-07-30@16:50:15.255 [brltty] Preferences File: brltty.prefs 2016-07-30@16:50:15.255 [brltty] regions: text=0.0 status=0.0 2016-07-30@16:50:15.255 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@16:50:15.255 [brltty] Drivers Directory: /lib/brltty 2016-07-30@16:50:15.255 [brltty] Tables Directory: /etc/brltty 2016-07-30@16:50:15.255 [brltty] checking for text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@16:50:15.304 [brltty] compiling text table: /etc/brltty/Text/en_GB.ttb 2016-07-30@16:50:15.304 [brltty] file opened: /etc/brltty/Text/en_GB.ttb fd=4 2016-07-30@16:50:15.304 [brltty] including data file: /etc/brltty/Text/en_GB.ttb 2016-07-30@16:50:15.316 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=5 2016-07-30@16:50:15.316 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti 2016-07-30@16:50:15.354 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=5 2016-07-30@16:50:15.354 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti 2016-07-30@16:50:15.371 [brltty] file opened: /etc/brltty/Text/common.tti fd=5 2016-07-30@16:50:15.372 [brltty] including data file: /etc/brltty/Text/common.tti 2016-07-30@16:50:15.392 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=6 2016-07-30@16:50:15.392 [brltty] including data file: /etc/brltty/Text/spaces.tti 2016-07-30@16:50:15.399 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=6 2016-07-30@16:50:15.399 [brltty] including data file: /etc/brltty/Text/boxes.tti 2016-07-30@16:50:15.413 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=6 2016-07-30@16:50:15.413 [brltty] including data file: /etc/brltty/Text/blocks.tti 2016-07-30@16:50:15.420 [brltty] Text Table: en_GB 2016-07-30@16:50:15.420 [brltty] program exit event added: text-table 2016-07-30@16:50:15.420 [brltty] Attributes Table: left_right 2016-07-30@16:50:15.420 [brltty] program exit event added: attributes-table 2016-07-30@16:50:15.420 [brltty] program exit event added: contraction-table 2016-07-30@16:50:15.420 [brltty] Contraction Table: none 2016-07-30@16:50:15.420 [brltty] Keyboard Property: type= 2016-07-30@16:50:15.421 [brltty] Keyboard Property: vendor= 2016-07-30@16:50:15.421 [brltty] Keyboard Property: product= 2016-07-30@16:50:15.421 [brltty] program exit event added: keyboard-table 2016-07-30@16:50:15.421 [brltty] Keyboard Table: none 2016-07-30@16:50:15.421 [brltty] program exit event added: screen-driver 2016-07-30@16:50:15.421 [brltty] activity action request: screen-driver: start 2016-07-30@16:50:15.421 [brltty] activity state change: screen-driver: 4[preparing] 2016-07-30@16:50:15.421 [brltty] activity state change: screen-driver: 1[prepared] 2016-07-30@16:50:15.421 [brltty] activity state change: screen-driver: 2[scheduled] 2016-07-30@16:50:15.421 [brltty] BrlAPI Server: release 0.6.2 2016-07-30@16:50:15.421 [brltty] API Parameter: auth= 2016-07-30@16:50:15.421 [brltty] API Parameter: host= 2016-07-30@16:50:15.421 [brltty] API Parameter: stacksize= 2016-07-30@16:50:15.421 [brltty] program exit event added: address-table 2016-07-30@16:50:15.421 [brltty] program exit event added: api-server 2016-07-30@16:50:15.421 [brltty] program exit event added: braille-data 2016-07-30@16:50:15.422 [brltty] program exit event added: braille-driver 2016-07-30@16:50:15.422 [brltty] activity action request: braille-driver: start 2016-07-30@16:50:15.422 [brltty] activity state change: braille-driver: 4[preparing] 2016-07-30@16:50:15.422 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-07-30@16:50:15.422 [brltty] regions: text=0.1 status=0.0 2016-07-30@16:50:15.422 [brltty] shifts: full=1 half=0 vertical=5 2016-07-30@16:50:15.422 [brltty] activity state change: braille-driver: 1[prepared] 2016-07-30@16:50:15.422 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@16:50:15.422 [brltty] program exit event added: speech-data 2016-07-30@16:50:15.422 [brltty] program exit event added: speech-driver 2016-07-30@16:50:15.422 [brltty] activity action request: speech-driver: start 2016-07-30@16:50:15.422 [brltty] activity state change: speech-driver: 4[preparing] 2016-07-30@16:50:15.422 [brltty] activity state change: speech-driver: 1[prepared] 2016-07-30@16:50:15.422 [brltty] activity state change: speech-driver: 2[scheduled] 2016-07-30@16:50:15.422 [brltty] Speech Input: none 2016-07-30@16:50:15.422 [brltty] program exit event added: sessions 2016-07-30@16:50:15.422 [brltty] pushed command environment: main 2016-07-30@16:50:15.422 [brltty] pushed command handler: unhandled 2016-07-30@16:50:15.422 [brltty] pushed command handler: miscellaneous 2016-07-30@16:50:15.422 [brltty] pushed command handler: learn 2016-07-30@16:50:15.422 [brltty] pushed command handler: speech 2016-07-30@16:50:15.422 [brltty] pushed command handler: clipboard 2016-07-30@16:50:15.422 [brltty] pushed command handler: preferences 2016-07-30@16:50:15.422 [brltty] pushed command handler: toggle 2016-07-30@16:50:15.423 [brltty] pushed command handler: touch 2016-07-30@16:50:15.423 [brltty] report listener registered: 0: keycodeCommandDataResetListener 2016-07-30@16:50:15.423 [brltty] pushed command handler: keycodes 2016-07-30@16:50:15.423 [brltty] report listener registered: 0: inputCommandDataResetListener 2016-07-30@16:50:15.423 [brltty] pushed command handler: input 2016-07-30@16:50:15.423 [brltty] pushed command handler: navigation 2016-07-30@16:50:15.423 [brltty] pushed command handler: screen 2016-07-30@16:50:15.423 [brltty] pushed command handler: custom 2016-07-30@16:50:15.423 [brltty] activity state change: screen-driver: 6[starting] 2016-07-30@16:50:15.423 [brltty] checking for screen driver: lx 2016-07-30@16:50:15.462 [brltty] initializing screen driver: lx 2016-07-30@16:50:15.463 [brltty] device directory: /dev 2016-07-30@16:50:15.463 [brltty] checking screen device: /dev/vcsa 2016-07-30@16:50:15.463 [brltty] screen device: vcsa 2016-07-30@16:50:15.463 [brltty] checking console device: /dev/tty0 2016-07-30@16:50:15.463 [brltty] console device: tty0 2016-07-30@16:50:15.463 [brltty] device opened: /dev/vcsa: fd=7 2016-07-30@16:50:15.463 [brltty] screen opened: vcsa: fd=7 2016-07-30@16:50:15.463 [brltty] device opened: /dev/tty0: fd=9 2016-07-30@16:50:15.463 [brltty] console opened: tty0: fd=9 2016-07-30@16:50:15.463 [brltty] screen is monitorable: yes 2016-07-30@16:50:15.463 [brltty] Screen Font Map Size: 303 2016-07-30@16:50:15.463 [brltty] VGA Character Count: 256(small) 2016-07-30@16:50:15.463 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@16:50:15.463 [brltty] starting host command: /sbin/modprobe 2016-07-30@16:50:15.507 [brltty] host command exit status: 0: /sbin/modprobe 2016-07-30@16:50:15.507 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@16:50:15.507 [brltty] checking braille device: usb: 2016-07-30@16:50:15.507 [brltty] performing braille driver autodetection 2016-07-30@16:50:15.507 [brltty] checking for braille driver: al 2016-07-30@16:50:15.524 [brltty] initializing braille driver: al -> usb: 2016-07-30@16:50:15.527 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@16:50:15.527 [brltty] checking for braille driver: bm 2016-07-30@16:50:15.557 [brltty] initializing braille driver: bm -> usb: 2016-07-30@16:50:15.557 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@16:50:15.557 [brltty] checking for braille driver: eu 2016-07-30@16:50:15.595 [brltty] initializing braille driver: eu -> usb: 2016-07-30@16:50:15.596 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@16:50:15.596 [brltty] checking for braille driver: fs 2016-07-30@16:50:15.606 [brltty] initializing braille driver: fs -> usb: 2016-07-30@16:50:15.607 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@16:50:15.607 [brltty] checking for braille driver: hd 2016-07-30@16:50:15.617 [brltty] initializing braille driver: hd -> usb: 2016-07-30@16:50:15.617 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@16:50:15.617 [brltty] checking for braille driver: hm 2016-07-30@16:50:15.627 [brltty] initializing braille driver: hm -> usb: 2016-07-30@16:50:15.628 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@16:50:15.628 [brltty] checking for braille driver: ht 2016-07-30@16:50:15.663 [brltty] initializing braille driver: ht -> usb: 2016-07-30@16:50:15.663 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@16:50:15.663 [brltty] checking for braille driver: hw 2016-07-30@16:50:15.671 [brltty] initializing braille driver: hw -> usb: 2016-07-30@16:50:15.671 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@16:50:15.671 [brltty] checking for braille driver: mt 2016-07-30@16:50:15.681 [brltty] initializing braille driver: mt -> usb: 2016-07-30@16:50:15.681 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@16:50:15.681 [brltty] checking for braille driver: pg 2016-07-30@16:50:15.701 [brltty] initializing braille driver: pg -> usb: 2016-07-30@16:50:15.701 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@16:50:15.701 [brltty] checking for braille driver: pm 2016-07-30@16:50:15.727 [brltty] initializing braille driver: pm -> usb: 2016-07-30@16:50:15.728 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@16:50:15.728 [brltty] checking for braille driver: sk 2016-07-30@16:50:15.737 [brltty] initializing braille driver: sk -> usb: 2016-07-30@16:50:15.739 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@16:50:15.739 [brltty] checking for braille driver: vo 2016-07-30@16:50:15.754 [brltty] initializing braille driver: vo -> usb: 2016-07-30@16:50:15.755 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@16:50:15.755 [brltty] braille driver not found 2016-07-30@16:50:15.755 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.755 [brltty] program exit event added: bluetooth-device-queue 2016-07-30@16:50:15.833 [brltty] hci_get_route error 19: No such device. 2016-07-30@16:50:15.833 [brltty] performing braille driver autodetection 2016-07-30@16:50:15.833 [brltty] checking for braille driver: np 2016-07-30@16:50:15.845 [brltty] initializing braille driver: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.869 [brltty] braille driver initialization failed: np -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.870 [brltty] checking for braille driver: ht 2016-07-30@16:50:15.870 [brltty] initializing braille driver: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.870 [brltty] braille driver initialization failed: ht -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.870 [brltty] checking for braille driver: al 2016-07-30@16:50:15.871 [brltty] initializing braille driver: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.871 [brltty] braille driver initialization failed: al -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.871 [brltty] checking for braille driver: bm 2016-07-30@16:50:15.871 [brltty] initializing braille driver: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.871 [brltty] braille driver initialization failed: bm -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:15.871 [brltty] braille driver not found 2016-07-30@16:50:15.872 [brltty] checking braille device: bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.872 [brltty] hci_get_route error 19: No such device. 2016-07-30@16:50:15.872 [brltty] performing braille driver autodetection 2016-07-30@16:50:15.872 [brltty] checking for braille driver: np 2016-07-30@16:50:15.872 [brltty] initializing braille driver: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.872 [brltty] braille driver initialization failed: np -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.872 [brltty] checking for braille driver: ht 2016-07-30@16:50:15.873 [brltty] initializing braille driver: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.873 [brltty] braille driver initialization failed: ht -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.873 [brltty] checking for braille driver: al 2016-07-30@16:50:15.873 [brltty] initializing braille driver: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.873 [brltty] braille driver initialization failed: al -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.873 [brltty] checking for braille driver: bm 2016-07-30@16:50:15.874 [brltty] initializing braille driver: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.874 [brltty] braille driver initialization failed: bm -> bluetooth:00:17:91:04:7D:10 2016-07-30@16:50:15.874 [brltty] braille driver not found 2016-07-30@16:50:15.874 [brltty] activity state change: braille-driver: 2[scheduled] 2016-07-30@16:50:15.874 [brltty] activity state change: speech-driver: 6[starting] 2016-07-30@16:50:15.874 [brltty] no autodetectable speech drivers 2016-07-30@16:50:15.874 [brltty] checking for speech driver: no 2016-07-30@16:50:15.874 [brltty] initializing speech driver: no 2016-07-30@16:50:15.874 [brltty] Speech Driver: no [NoSpeech] 2016-07-30@16:50:15.875 [brltty] NoSpeech Speech Driver: 2016-07-30@16:50:15.875 [brltty] activity state change: speech-driver: 3[started] 2016-07-30@16:50:16.008 [brltty] checking uinput device: /dev/uinput 2016-07-30@16:50:16.008 [brltty] uinput device: uinput 2016-07-30@16:50:16.008 [brltty] device opened: /dev/uinput: fd=14 2016-07-30@16:50:16.008 [brltty] uinput opened: uinput fd=14 2016-07-30@16:50:16.009 [brltty] report listener registered: 1: lxBrailleOfflineListener 2016-07-30@16:50:16.009 [brltty] Screen Driver: lx [Linux] 2016-07-30@16:50:16.009 [brltty] Linux Screen Driver: 2016-07-30@16:50:16.009 [brltty] Screen Parameter: charset= 2016-07-30@16:50:16.009 [brltty] Screen Parameter: hfb= 2016-07-30@16:50:16.009 [brltty] Screen Parameter: debugsfm= 2016-07-30@16:50:16.009 [brltty] activity state change: screen-driver: 3[started] 2016-07-30@16:50:16.010 [brltty] Screen Font Map Size: 303 2016-07-30@16:50:16.010 [brltty] VGA Character Count: 256(small) 2016-07-30@16:50:16.010 [brltty] attributes masks: font=0000 unshifted=FF00 shifted=0000 2016-07-30@16:50:16.010 [brltty] console number changed: 0 -> 7 2016-07-30@16:50:18.042 [server-main] BrlAPI connection fd=15 accepted: local <unnamed> 2016-07-30@16:50:18.048 [server-main] adding range [0(0)..ffffffff(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [2000004c(0)..2000004c(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20000000(0)..20000000(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [2000004a(0)..2000004a(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [2000004b(0)..2000004b(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20060000(0)..2006ffff(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20000046(0)..20000046(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20000047(0)..20000047(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20240000(0)..2024ffff(ffffffff)] 2016-07-30@16:50:18.048 [server-main] removing range [20230000(0)..2023ffff(ffffffff)] 2016-07-30@16:50:18.049 [server-main] removing range [20250000(0)..2025ffff(ffffffff)] 2016-07-30@16:50:18.049 [server-main] removing range [20220000(0)..2022ffff(ffffffff)] 2016-07-30@16:50:18.049 [server-main] removing range [0(0)..ffffffff(ffffffff)] 2016-07-30@16:50:18.049 [server-main] adding range [0(0)..1fffffff(ffffffff)] 2016-07-30@16:50:18.049 [server-main] adding range [2000004d(0)..2000004d(ffffffff)] 2016-07-30@16:50:18.049 [server-main] adding range [2000004e(0)..2000004e(ffffffff)] 2016-07-30@16:50:18.049 [server-main] adding range [2000004f(0)..2000004f(ffffffff)] 2016-07-30@16:50:18.050 [server-main] adding range [20000050(0)..20000050(ffffffff)] 2016-07-30@16:50:18.050 [server-main] removing range [0(c)..ffffffff(c)] 2016-07-30@16:50:20.422 [brltty] activity state change: braille-driver: 6[starting] 2016-07-30@16:50:20.423 [brltty] checking braille device: usb: 2016-07-30@16:50:20.423 [brltty] performing braille driver autodetection 2016-07-30@16:50:20.423 [brltty] checking for braille driver: al 2016-07-30@16:50:20.423 [brltty] initializing braille driver: al -> usb: 2016-07-30@16:50:20.425 [brltty] braille driver initialization failed: al -> usb: 2016-07-30@16:50:20.426 [brltty] checking for braille driver: bm 2016-07-30@16:50:20.426 [brltty] initializing braille driver: bm -> usb: 2016-07-30@16:50:20.427 [brltty] braille driver initialization failed: bm -> usb: 2016-07-30@16:50:20.427 [brltty] checking for braille driver: eu 2016-07-30@16:50:20.427 [brltty] initializing braille driver: eu -> usb: 2016-07-30@16:50:20.428 [brltty] braille driver initialization failed: eu -> usb: 2016-07-30@16:50:20.428 [brltty] checking for braille driver: fs 2016-07-30@16:50:20.429 [brltty] initializing braille driver: fs -> usb: 2016-07-30@16:50:20.429 [brltty] braille driver initialization failed: fs -> usb: 2016-07-30@16:50:20.429 [brltty] checking for braille driver: hd 2016-07-30@16:50:20.430 [brltty] initializing braille driver: hd -> usb: 2016-07-30@16:50:20.430 [brltty] braille driver initialization failed: hd -> usb: 2016-07-30@16:50:20.430 [brltty] checking for braille driver: hm 2016-07-30@16:50:20.431 [brltty] initializing braille driver: hm -> usb: 2016-07-30@16:50:20.431 [brltty] braille driver initialization failed: hm -> usb: 2016-07-30@16:50:20.432 [brltty] checking for braille driver: ht 2016-07-30@16:50:20.432 [brltty] initializing braille driver: ht -> usb: 2016-07-30@16:50:20.433 [brltty] braille driver initialization failed: ht -> usb: 2016-07-30@16:50:20.433 [brltty] checking for braille driver: hw 2016-07-30@16:50:20.433 [brltty] initializing braille driver: hw -> usb: 2016-07-30@16:50:20.434 [brltty] braille driver initialization failed: hw -> usb: 2016-07-30@16:50:20.434 [brltty] checking for braille driver: mt 2016-07-30@16:50:20.434 [brltty] initializing braille driver: mt -> usb: 2016-07-30@16:50:20.436 [brltty] braille driver initialization failed: mt -> usb: 2016-07-30@16:50:20.436 [brltty] checking for braille driver: pg 2016-07-30@16:50:20.437 [brltty] initializing braille driver: pg -> usb: 2016-07-30@16:50:20.437 [brltty] braille driver initialization failed: pg -> usb: 2016-07-30@16:50:20.437 [brltty] checking for braille driver: pm 2016-07-30@16:50:20.438 [brltty] initializing braille driver: pm -> usb: 2016-07-30@16:50:20.438 [brltty] braille driver initialization failed: pm -> usb: 2016-07-30@16:50:20.439 [brltty] checking for braille driver: sk 2016-07-30@16:50:20.439 [brltty] initializing braille driver: sk -> usb: 2016-07-30@16:50:20.440 [brltty] braille driver initialization failed: sk -> usb: 2016-07-30@16:50:20.440 [brltty] checking for braille driver: vo 2016-07-30@16:50:20.440 [brltty] initializing braille driver: vo -> usb: 2016-07-30@16:50:20.441 [brltty] braille driver initialization failed: vo -> usb: 2016-07-30@16:50:20.441 [brltty] braille driver not found 2016-07-30@16:50:20.441 [brltty] checking braille device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:21.529 [brltty] performing braille driver autodetection 2016-07-30@16:50:21.530 [brltty] checking for braille driver: hw 2016-07-30@16:50:21.530 [brltty] initializing braille driver: hw -> bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:23.548 [brltty] output packet: sent: 1B 00 00 2016-07-30@16:50:23.795 [brltty] input packet: 1B 01 03 00 02 20 2016-07-30@16:50:23.796 [brltty] detected Humanware device: model=2 cells=32 2016-07-30@16:50:23.796 [brltty] Braille Display Dimensions: 1 row, 32 columns 2016-07-30@16:50:23.796 [brltty] regions: text=0.32 status=0.0 2016-07-30@16:50:23.796 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@16:50:23.796 [brltty] Key Bindings: all 2016-07-30@16:50:23.796 [brltty] program exit event added: sorted-command-table 2016-07-30@16:50:23.805 [brltty] file opened: /etc/brltty/Input/hw/all.ktb fd=17 2016-07-30@16:50:23.805 [brltty] including data file: /etc/brltty/Input/hw/all.ktb 2016-07-30@16:50:23.806 [brltty] file opened: /etc/brltty/Input/hw/../chords.kti fd=18 2016-07-30@16:50:23.807 [brltty] including data file: /etc/brltty/Input/hw/../chords.kti 2016-07-30@16:50:23.809 [brltty] program exit event added: sorted-keyboard-functions 2016-07-30@16:50:23.811 [brltty] file opened: /etc/brltty/Input/hw/../bm/display6.kti fd=18 2016-07-30@16:50:23.811 [brltty] including data file: /etc/brltty/Input/hw/../bm/display6.kti 2016-07-30@16:50:23.814 [brltty] file opened: /etc/brltty/Input/hw/../bm/routing6.kti fd=18 2016-07-30@16:50:23.814 [brltty] including data file: /etc/brltty/Input/hw/../bm/routing6.kti 2016-07-30@16:50:23.835 [brltty] Key Table: /etc/brltty/Input/hw/all.ktb 2016-07-30@16:50:23.839 [brltty] report: 0: keycodeCommandDataResetListener 2016-07-30@16:50:23.839 [brltty] report: 0: inputCommandDataResetListener 2016-07-30@16:50:23.839 [brltty] Braille Driver: hw [HumanWare] 2016-07-30@16:50:23.839 [brltty] HumanWare Braille Driver: 2016-07-30@16:50:23.839 [brltty] Braille Device: bluetooth:00:25:EC:01:8D:EB 2016-07-30@16:50:23.839 [brltty] Old Preferences File: /etc/brltty-hw.prefs 2016-07-30@16:50:23.839 [brltty] cannot open file: /etc/brltty-hw.prefs: No such file or directory 2016-07-30@16:50:23.839 [brltty] regions: text=0.32 status=0.0 2016-07-30@16:50:23.839 [brltty] shifts: full=32 half=16 vertical=5 2016-07-30@16:50:23.840 [brltty] starting host command: /sbin/modprobe 2016-07-30@16:50:23.846 [brltty] host command exit status: 1: /sbin/modprobe 2016-07-30@16:50:23.847 [brltty] kernel module not installed: pcspkr 2016-07-30@16:50:23.847 [brltty] console opened: fd=17 2016-07-30@16:50:23.847 [brltty] program exit event added: console-stream 2016-07-30@16:50:23.847 [brltty] beeper enabled 2016-07-30@16:50:23.847 [brltty] program exit event added: tunes 2016-07-30@16:50:23.847 [brltty] tone: msec=60 note=64 2016-07-30@16:50:23.907 [brltty] tone: msec=100 note=69 2016-07-30@16:50:24.007 [brltty] activity state change: braille-driver: 3[started] 2016-07-30@16:50:24.008 [brltty] pushed command environment: message 2016-07-30@16:50:24.008 [brltty] pushed command handler: message 2016-07-30@16:50:24.008 [brltty] output packet: sent: 1B 02 20 43 57 47 5E 5E 7D 00 31 32 23 19 11 27 00 17 11 27 00 43 57 47 5E 5E 7D 24 31 32 21 24 3B 2A 34 2016-07-30@16:50:25.908 [brltty] beeper disabled 2016-07-30@16:50:28.011 [brltty] output packet: sent: 1B 02 20 39 24 1B 31 2B 31 11 2A 03 21 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2016-07-30@16:50:39.587 [brltty] popped command handler: message 2016-07-30@16:50:39.587 [brltty] popped command environment: message 2016-07-30@16:50:39.587 [brltty] output packet: sent: 1B 02 20 0E 09 17 11 11 1D 00 1D 15 1E 00 0A 1D 00 1E 11 2D 1E 00 0D 15 19 11 00 00 00 00 00 00 00 00 00 2016-07-30@16:50:47.092 [server-main] BrlAPI connection fd=18 accepted: local <unnamed> 2016-07-30@16:50:47.093 [server-main] writing error 9 to 18 2016-07-30@16:50:47.093 [server-main] isRawCapable(trueBraille) not met: driver doesn't support Raw mode 2016-07-30@16:50:47.093 [server-main] adding range [0(0)..ffffffff(ffffffff)] 2016-07-30@16:50:47.093 [server-main] removing range [2000004c(0)..2000004c(ffffffff)] 2016-07-30@16:50:47.093 [server-main] removing range [20000000(0)..20000000(ffffffff)] 2016-07-30@16:50:47.093 [server-main] removing range [2000004a(0)..2000004a(ffffffff)] 2016-07-30@16:50:47.093 [server-main] removing range [2000004b(0)..2000004b(ffffffff)] 2016-07-30@16:50:47.093 [server-main] removing range [20060000(0)..2006ffff(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20000046(0)..20000046(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20000047(0)..20000047(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20240000(0)..2024ffff(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20230000(0)..2023ffff(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20250000(0)..2025ffff(ffffffff)] 2016-07-30@16:50:47.094 [server-main] removing range [20220000(0)..2022ffff(ffffffff)] 2016-07-30@16:50:47.094 [server-main] program exit event added: wchar-charset 2016-07-30@16:50:47.094 [server-main] program exit event added: charset-iconv 2016-07-30@16:50:47.094 [server-main] program exit event added: current-charset 2016-07-30@16:50:47.094 [brltty] output packet: sent: 1B 02 20 4F 17 11 0E 0E 00 01 00 03 17 01 0A 07 07 11 00 05 11 3D 00 1E 15 00 09 15 1D 1E 0A 1D 25 11 32 2016-07-30@16:50:52.043 [brltty] input packet: 1B 05 01 04 2016-07-30@16:50:52.043 [brltty] program exit event added: command-queue 2016-07-30@16:50:52.043 [brltty] brl key press: Dot3 (Ctx:2 Grp:0 Num:4) -> NOOP (Cmd:000000) 2016-07-30@16:50:52.043 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@16:50:52.315 [brltty] input packet: 1B 06 01 04 2016-07-30@16:50:52.315 [brltty] brl key release: Dot3 (Ctx:2 Grp:0 Num:4) -> PASSDOTS (Cmd:002204) 2016-07-30@16:50:53.940 [brltty] input packet: 1B 05 01 04 2016-07-30@16:50:53.940 [brltty] brl key press: Dot3 (Ctx:2 Grp:0 Num:4) -> NOOP (Cmd:000000) 2016-07-30@16:50:53.940 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@16:50:54.166 [brltty] input packet: 1B 06 01 04 2016-07-30@16:50:54.166 [brltty] brl key release: Dot3 (Ctx:2 Grp:0 Num:4) -> PASSDOTS (Cmd:002204) 2016-07-30@16:50:54.956 [brltty] input packet: 1B 05 01 04 2016-07-30@16:50:54.957 [brltty] brl key press: Dot3 (Ctx:2 Grp:0 Num:4) -> NOOP (Cmd:000000) 2016-07-30@16:50:54.957 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@16:50:55.183 [brltty] input packet: 1B 06 01 04 2016-07-30@16:50:55.183 [brltty] brl key release: Dot3 (Ctx:2 Grp:0 Num:4) -> PASSDOTS (Cmd:002204) 2016-07-30@16:50:56.294 [brltty] input packet: 1B 05 01 0B 2016-07-30@16:50:56.294 [brltty] brl key press: Display1 (Ctx:2 Grp:0 Num:11) -> NOOP (Cmd:000000) 2016-07-30@16:50:56.294 [brltty] command: 000000 (NOOP: do nothing) 2016-07-30@16:50:56.455 [brltty] input packet: 1B 06 01 0B 2016-07-30@16:50:56.455 [brltty] brl key release: Display1 (Ctx:2 Grp:0 Num:11) -> CSRTRK (Cmd:010028)
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
