You have to chown /etc/brltty.key, I think that's the right dir. Once that's done, it should work. You may have to restart orca though.
Sent from my iPhone > On Aug 26, 2016, at 3:06 PM, kendell clark <[email protected]> wrote: > > hi all > As the subject line says, I've been having minor problems getting brltty > to work with an older braille sense a friend of mine, billy wolf, sent > to me to improve sonar's braille support. The braille sense uses USB to > interact with the computer, and appears to use a printer style cable. > Square end goes into the braille sense, other end goes into the > computer. I can plug it in, go into the terminal for screen reader mode > and brltty will work with it in the text console, but not when I switch > to the gui. When I do that, brltty displays "screen not in text mode" in > grade 1 and the braille display doesn't work. I've been told I need to > have the at-spi2 screen driver enabled, which I've just done. I've > checked that braille is enabled in orca and the contraction table is set > to en-ueb-g2 so that grade 2 braille works. However, this doesn't seem > to have solved it. I've verified that brlapi.key is world readable. Is > there anything else I should try? I've made sure that brltty autodetects > the display, and no specific driver is selected. The last issue to > report is that grade 2 doesn't seem to work in the text console. I'm > sure this is just a matter of selecting the correct braille table, can > this be set in the brltty.conf file? Sorry for all the questions, I'm > new to actually trying to use brltty as opposed to just configuring it > for others. That's why I asked Billy to send me the display so I could > have some first hand experience. > Thanks > Kendell Clark > > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
