I am using a terminal emulator.

$ stty -a -F /dev/pts/7
speed 38400 baud; rows 50; columns 194; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = <undef>; discard = ^O;
min = 1; time = 0;
-parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig -icanon iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke -flusho -extproc


On 18.09.2016 20:31, Dave Mielke wrote:
[quoted lines by Christoph-Simon Senjak on 2016/09/18 at 18:37 +0200]

It appears to work now in both configurations.

That patch is now committed to the repository.

Without ncurses, it does not react on keyboard inputs, but neither does the
original code which had no dots.

Are you using a serial port with an external device, a virtual tty, or what?

Could you please post the output of "stty -a -F /dev/whatever" while brltty is
ruhnning without ncurses?

_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@mielke.cc
For general information, go to: http://mielke.cc/mailman/listinfo/brltty

Reply via email to