Log file attached. Many thanks your help.
On Wed, 5 Oct 2016, Dave Mielke wrote:
Date: Wed, 5 Oct 2016 23:41:59
From: Dave Mielke <[email protected]>
Reply-To: Informal discussion between users and developers of BRLTTY.
<[email protected]>
To: Informal discussion between users and developers of BRLTTY.
<[email protected]>
Subject: Re: [BRLTTY] preference setting problem
[quoted lines by 高生旺 on 2016/10/05 at 22:03 +0800]
Am I understanding corerectly, then, that the settings are being
saved but probably aren't being restored on reboot?
You're right.
What happens if you tell brltty to load the preferences after the system is
fully up?
Then we need a debug log for what's happening during the reboot. Try adding
lines like these to your brltty.conf file:
log-file /path/to/logfile
log-level debug
My personal guess is that brltty is starting before /var is mounted. Is /var in
a different partition?
--
Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God.
Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/
EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
2016-10-06@13:25:28.596 [brltty] BRLTTY 5.4 rev BRLTTY-5.4 [http://brltty.com/]
2016-10-06@13:25:28.597 [brltty] lock descriptor allocated:
queue-discarded-elements
2016-10-06@13:25:28.597 [brltty] 記錄等級: debug
2016-10-06@13:25:28.597 [brltty] pushed command environment: initial
2016-10-06@13:25:28.597 [brltty] report listener registered: 0:
handleUpdateBrailleOnline
2016-10-06@13:25:28.599 [brltty] program exit event added: screen-data
2016-10-06@13:25:28.599 [brltty] 工作目錄: /home/coscell
2016-10-06@13:25:28.599 [brltty] 設定檔: /etc/brltty.conf
2016-10-06@13:25:28.599 [brltty] 可更新的目錄: /var/lib/brltty
2016-10-06@13:25:28.599 [brltty] 偏好檔案: brltty.prefs
2016-10-06@13:25:28.599 [brltty] 寫入的目錄: /var/run/brltty
2016-10-06@13:25:28.599 [brltty] 驅動程式目錄: /lib/brltty
2016-10-06@13:25:28.599 [brltty] 對照表目錄: /etc/brltty
2016-10-06@13:25:28.599 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2016-10-06@13:25:28.599 [brltty] file opened: /var/lib/brltty/brltty.prefs fd=4
2016-10-06@13:25:28.599 [brltty] starting host command: /sbin/modprobe -q uinput
2016-10-06@13:25:28.601 [brltty] host command exit status: 0: /sbin/modprobe
2016-10-06@13:25:29.101 [brltty] device directory: /dev
2016-10-06@13:25:29.101 [brltty] checking uinput device: /dev/uinput
2016-10-06@13:25:29.101 [brltty] uinput device: uinput
2016-10-06@13:25:29.101 [brltty] device opened: /dev/uinput: fd=4
2016-10-06@13:25:29.101 [brltty] uinput opened: uinput fd=4
2016-10-06@13:25:29.105 [brltty] input event monitor opened: fd=4
2016-10-06@13:25:29.105 [brltty] checking uinput device: /dev/uinput
2016-10-06@13:25:29.106 [brltty] uinput device: uinput
2016-10-06@13:25:29.106 [brltty] device opened: /dev/uinput: fd=5
2016-10-06@13:25:29.106 [brltty] uinput opened: uinput fd=5
2016-10-06@13:25:29.112 [brltty] input event monitor opened: fd=5
2016-10-06@13:25:29.112 [brltty] program exit event added: tunes
2016-10-06@13:25:29.112 [brltty] tune thread state change: 0 -> 1
2016-10-06@13:25:29.112 [brltty] tune thread state change: 1 -> 3
2016-10-06@13:25:29.112 [brltty] regions: text=0.0 status=0.0
2016-10-06@13:25:29.112 [brltty] shifts: full=1 half=0 vertical=5
2016-10-06@13:25:29.112 [brltty] checking for text table:
/etc/brltty/Text/zh_TW.ttb
2016-10-06@13:25:29.112 [brltty] checking for text table:
/etc/brltty/Text/zh.ttb
2016-10-06@13:25:29.112 [brltty] 文字表: en-nabcc
2016-10-06@13:25:29.112 [brltty] program exit event added: text-table
2016-10-06@13:25:29.112 [brltty] 屬性表: left_right
2016-10-06@13:25:29.112 [brltty] program exit event added: attributes-table
2016-10-06@13:25:29.112 [brltty] program exit event added: contraction-table
2016-10-06@13:25:29.112 [brltty] 縮寫表: 沒有
2016-10-06@13:25:29.112 [brltty] Keyboard Property: type=
2016-10-06@13:25:29.112 [brltty] Keyboard Property: vendor=
2016-10-06@13:25:29.112 [brltty] Keyboard Property: product=
2016-10-06@13:25:29.112 [brltty] program exit event added: keyboard-table
2016-10-06@13:25:29.112 [brltty] 按鍵表: 沒有
2016-10-06@13:25:29.112 [brltty] program exit event added: screen-driver
2016-10-06@13:25:29.112 [brltty] activity action request: screen-driver: start
2016-10-06@13:25:29.112 [brltty] activity state change: screen-driver:
4[preparing]
2016-10-06@13:25:29.112 [brltty] activity state change: screen-driver:
1[prepared]
2016-10-06@13:25:29.112 [brltty] activity state change: screen-driver:
2[scheduled]
2016-10-06@13:25:29.112 [brltty] BrlAPI Server: release 0.6.5
2016-10-06@13:25:29.112 [brltty] API 參數: auth=
2016-10-06@13:25:29.112 [brltty] API 參數: host=
2016-10-06@13:25:29.112 [brltty] API 參數: stacksize=
2016-10-06@13:25:29.112 [brltty] program exit event added: address-table
2016-10-06@13:25:29.112 [brltty] program exit event added: api-server
2016-10-06@13:25:29.112 [brltty] program exit event added: braille-data
2016-10-06@13:25:29.112 [brltty] program exit event added: braille-driver
2016-10-06@13:25:29.113 [brltty] activity action request: braille-driver: start
2016-10-06@13:25:29.113 [brltty] activity state change: braille-driver:
4[preparing]
2016-10-06@13:25:29.113 [brltty] Braille Display Dimensions: 1 row, 1 column
2016-10-06@13:25:29.113 [brltty] regions: text=0.1 status=0.0
2016-10-06@13:25:29.113 [brltty] shifts: full=1 half=0 vertical=5
2016-10-06@13:25:29.113 [brltty] activity state change: braille-driver:
1[prepared]
2016-10-06@13:25:29.113 [brltty] activity state change: braille-driver:
2[scheduled]
2016-10-06@13:25:29.113 [brltty] program exit event added: speech-data
2016-10-06@13:25:29.113 [brltty] program exit event added: speech-driver
2016-10-06@13:25:29.113 [brltty] activity action request: speech-driver: start
2016-10-06@13:25:29.113 [brltty] activity state change: speech-driver:
4[preparing]
2016-10-06@13:25:29.113 [brltty] activity state change: speech-driver:
1[prepared]
2016-10-06@13:25:29.113 [brltty] activity state change: speech-driver:
2[scheduled]
2016-10-06@13:25:29.113 [brltty] 語音輸入: 沒有
2016-10-06@13:25:29.113 [brltty] program exit event added: sessions
2016-10-06@13:25:29.113 [brltty] pushed command environment: main
2016-10-06@13:25:29.113 [brltty] pushed command handler: unhandled
2016-10-06@13:25:29.113 [brltty] pushed command handler: miscellaneous
2016-10-06@13:25:29.113 [brltty] pushed command handler: learn
2016-10-06@13:25:29.113 [brltty] pushed command handler: speech
2016-10-06@13:25:29.113 [brltty] pushed command handler: clipboard
2016-10-06@13:25:29.113 [brltty] pushed command handler: preferences
2016-10-06@13:25:29.113 [brltty] pushed command handler: toggle
2016-10-06@13:25:29.113 [brltty] report listener registered: 3:
brailleWindowUpdatedListener
2016-10-06@13:25:29.113 [brltty] pushed command handler: touch
2016-10-06@13:25:29.113 [brltty] report listener registered: 0:
keycodeCommandDataResetListener
2016-10-06@13:25:29.113 [brltty] pushed command handler: keycodes
2016-10-06@13:25:29.113 [brltty] report listener registered: 0:
inputCommandDataResetListener
2016-10-06@13:25:29.113 [brltty] pushed command handler: input
2016-10-06@13:25:29.113 [brltty] pushed command handler: navigation
2016-10-06@13:25:29.113 [brltty] pushed command handler: screen
2016-10-06@13:25:29.113 [brltty] pushed command handler: custom
2016-10-06@13:25:29.113 [brltty] pushed command handler: API
2016-10-06@13:25:29.113 [brltty] activity state change: screen-driver:
6[starting]
2016-10-06@13:25:29.113 [brltty] checking for screen driver: lx
2016-10-06@13:25:29.113 [brltty] initializing screen driver: lx
2016-10-06@13:25:29.113 [brltty] checking screen device: /dev/vcsa
2016-10-06@13:25:29.113 [brltty] screen device: vcsa
2016-10-06@13:25:29.113 [brltty] checking console device: /dev/tty0
2016-10-06@13:25:29.113 [brltty] console device: tty0
2016-10-06@13:25:29.113 [brltty] device opened: /dev/tty1: fd=12
2016-10-06@13:25:29.113 [brltty] device opened: /dev/vcsa: fd=13
2016-10-06@13:25:29.113 [brltty] checking uinput device: /dev/uinput
2016-10-06@13:25:29.113 [brltty] uinput device: uinput
2016-10-06@13:25:29.113 [brltty] device opened: /dev/uinput: fd=14
2016-10-06@13:25:29.113 [brltty] uinput opened: uinput fd=14
2016-10-06@13:25:29.120 [brltty] report listener registered: 1:
lxBrailleOfflineListener
2016-10-06@13:25:29.120 [brltty] 螢幕驅動: lx [Linux]
2016-10-06@13:25:29.120 [brltty] Linux Screen Driver:
2016-10-06@13:25:29.120 [brltty] 螢幕參數: charset=utf8+big5
2016-10-06@13:25:29.120 [brltty] 螢幕參數: debugsfm=
2016-10-06@13:25:29.120 [brltty] 螢幕參數: hfb=
2016-10-06@13:25:29.120 [brltty] 螢幕參數: vt=
2016-10-06@13:25:29.120 [brltty] activity state change: screen-driver:
3[started]
2016-10-06@13:25:29.120 [brltty] activity state change: braille-driver:
6[starting]
2016-10-06@13:25:29.120 [brltty] checking braille device: usb:
2016-10-06@13:25:29.120 [brltty] performing braille driver autodetection
2016-10-06@13:25:29.120 [brltty] checking for braille driver: al
2016-10-06@13:25:29.120 [brltty] initializing braille driver: al -> usb:
2016-10-06@13:25:29.121 [brltty] 點字驅動出使化失敗: al -> usb:
2016-10-06@13:25:29.121 [brltty] checking for braille driver: bm
2016-10-06@13:25:29.121 [brltty] initializing braille driver: bm -> usb:
2016-10-06@13:25:29.121 [brltty] 點字驅動出使化失敗: bm -> usb:
2016-10-06@13:25:29.121 [brltty] checking for braille driver: eu
2016-10-06@13:25:29.121 [brltty] initializing braille driver: eu -> usb:
2016-10-06@13:25:29.121 [brltty] 點字驅動出使化失敗: eu -> usb:
2016-10-06@13:25:29.121 [brltty] checking for braille driver: fs
2016-10-06@13:25:29.121 [brltty] initializing braille driver: fs -> usb:
2016-10-06@13:25:29.126 [brltty] USB: Manufacturer Name: Freedom Scientific
2016-10-06@13:25:29.127 [brltty] USB: Product Description: Focus 3
2016-10-06@13:25:29.127 [brltty] USB: Serial Number: 0123456
2016-10-06@13:25:29.128 [brltty] program exit event added:
sorted-usb-serial-adapters
2016-10-06@13:25:29.128 [brltty] activity state change: speech-driver:
6[starting]
2016-10-06@13:25:29.128 [brltty] no autodetectable speech drivers
2016-10-06@13:25:29.128 [brltty] checking for speech driver: no
2016-10-06@13:25:29.128 [brltty] initializing speech driver: no
2016-10-06@13:25:29.128 [brltty] device opened: /dev/tty0: fd=22
2016-10-06@13:25:29.128 [brltty] 語音驅動: no [NoSpeech]
2016-10-06@13:25:29.128 [brltty] NoSpeech Speech Driver:
2016-10-06@13:25:29.128 [brltty] activity state change: speech-driver:
3[started]
2016-10-06@13:25:29.129 [brltty] Detected Focus 40: cells=40, firmware=5.71
2016-10-06@13:25:29.129 [brltty] Manufacturer: FREEDOM SCIENTIFIC
2016-10-06@13:25:29.129 [brltty] Model: Focus 40
2016-10-06@13:25:29.129 [brltty] Firmware: 5.71
2016-10-06@13:25:29.129 [brltty] Braille Display Dimensions: 1 row, 40 columns
2016-10-06@13:25:29.129 [brltty] regions: text=0.40 status=0.0
2016-10-06@13:25:29.129 [brltty] shifts: full=40 half=20 vertical=5
2016-10-06@13:25:29.129 [brltty] 按鍵設定: focus_small
2016-10-06@13:25:29.129 [brltty] program exit event added: sorted-command-table
2016-10-06@13:25:29.129 [brltty] file opened:
/etc/brltty/Input/fs/focus_small.ktb fd=25
2016-10-06@13:25:29.129 [brltty] including data file:
/etc/brltty/Input/fs/focus_small.ktb
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/focus_basic.kti fd=26
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/focus_basic.kti
2016-10-06@13:25:29.130 [brltty] file opened: /etc/brltty/Input/fs/common.kti
fd=27
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/common.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../chords.kti fd=27
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../chords.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.130 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.130 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.131 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.131 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.131 [brltty] file opened:
/etc/brltty/Input/fs/../toggle.kti fd=28
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/../toggle.kti
2016-10-06@13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/../menu.kti
fd=28
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/../menu.kti
2016-10-06@13:25:29.131 [brltty] program exit event added:
sorted-keyboard-functions
2016-10-06@13:25:29.131 [brltty] file opened: /etc/brltty/Input/fs/rockers.kti
fd=26
2016-10-06@13:25:29.131 [brltty] including data file:
/etc/brltty/Input/fs/rockers.kti
2016-10-06@13:25:29.134 [brltty] 按鍵表: /etc/brltty/Input/fs/focus_small.ktb
2016-10-06@13:25:29.134 [brltty] constructing special screen: help
2016-10-06@13:25:29.135 [brltty] report listener registered: 0:
brlapi_handleReports
2016-10-06@13:25:29.135 [brltty] 點字驅動: fs [FreedomScientific]
2016-10-06@13:25:29.135 [brltty] FreedomScientific Braille Driver:
2016-10-06@13:25:29.135 [brltty] 點字設備: usb:
2016-10-06@13:25:29.135 [brltty] 舊的偏好設定檔: /etc/brltty-fs.prefs
2016-10-06@13:25:29.135 [brltty] regions: text=0.40 status=0.0
2016-10-06@13:25:29.135 [brltty] shifts: full=40 half=20 vertical=5
2016-10-06@13:25:29.135 [brltty] setting braille firmness: 2
2016-10-06@13:25:29.135 [brltty] program exit event added: alert-tunes
2016-10-06@13:25:29.142 [brltty] activity state change: braille-driver:
3[started]
2016-10-06@13:25:29.142 [brltty] report listener unregistered: 0:
brlapi_handleReports
2016-10-06@13:25:29.142 [brltty] pushed command environment: message
2016-10-06@13:25:29.142 [brltty] pushed command handler: message
2016-10-06@13:25:29.145 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:25:29.145 [tune-thread] PCM not available
2016-10-06@13:25:33.143 [brltty] popped command handler: message
2016-10-06@13:25:33.143 [brltty] popped command environment: message
2016-10-06@13:25:33.143 [brltty] report listener registered: 0:
brlapi_handleReports
2016-10-06@13:25:35.034 [brltty] program exit event added: command-queue
2016-10-06@13:25:35.034 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:35.184 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005
(PRDIFLN: 往上跳到最近的不同行)
2016-10-06@13:25:38.794 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:38.945 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005
(PRDIFLN: 往上跳到最近的不同行)
2016-10-06@13:25:41.880 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:42.031 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005
(PRDIFLN: 往上跳到最近的不同行)
2016-10-06@13:25:44.500 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:44.701 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:25:45.082 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:45.181 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:25:46.296 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:25:46.396 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:26:00.095 [server-main] BrlAPI connection fd=25 accepted: local
<unnamed>
2016-10-06@13:26:00.095 [server-main] adding range [0(0)..ffffffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[2000004c(0)..2000004c(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000000(0)..20000000(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[2000004a(0)..2000004a(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000073(0)..20000073(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000072(0)..20000072(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[2000004b(0)..2000004b(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000075(0)..20000075(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000074(0)..20000074(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000077(0)..20000077(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000076(0)..20000076(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20060000(0)..2006ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000046(0)..20000046(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000047(0)..20000047(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[201e0000(0)..201effff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000078(0)..20000078(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20000079(0)..20000079(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20240000(0)..2024ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20230000(0)..2023ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20250000(0)..2025ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20260000(0)..2026ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[201f0000(0)..201fffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] removing range
[20220000(0)..2022ffff(ffffffff)]
2016-10-06@13:26:00.095 [server-main] program exit event added: wchar-charset
2016-10-06@13:26:46.140 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:26:46.140 [tune-thread] PCM not available
2016-10-06@13:26:46.388 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:26:46.388 [tune-thread] PCM not available
2016-10-06@13:26:46.424 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:26:46.424 [tune-thread] PCM not available
2016-10-06@13:26:46.572 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:26:46.572 [tune-thread] PCM not available
2016-10-06@13:26:50.446 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:26:50.646 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:26:53.310 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:26:53.460 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:26:53.462 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:26:53.462 [tune-thread] PCM not available
2016-10-06@13:26:57.455 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:26:57.606 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:01.897 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:02.048 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:02.718 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:02.868 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:02.869 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:02.869 [tune-thread] PCM not available
2016-10-06@13:27:08.180 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:08.181 [tune-thread] PCM not available
2016-10-06@13:27:18.843 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:18.953 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:18.954 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:18.954 [tune-thread] PCM not available
2016-10-06@13:27:23.439 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:23.589 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:26.191 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:26.342 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:26.343 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:26.343 [tune-thread] PCM not available
2016-10-06@13:27:30.470 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:30.571 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:31.453 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:31.564 [brltty] command: 00001D (HOME: 跳到游標)
2016-10-06@13:27:56.774 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:27:56.884 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:27:56.885 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:56.885 [tune-thread] PCM not available
2016-10-06@13:27:56.886 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:27:56.886 [tune-thread] PCM not available
2016-10-06@13:28:01.459 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:28:01.570 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:28:22.203 [server-main] removing range [0(0)..ffffffff(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20010000(0)..2001ffff(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000020(0)..20000020(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000001(0)..20000001(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000002(0)..20000002(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20010000(0)..2001ffff(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[2000000b(0)..2000000b(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[2000000c(0)..2000000c(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000022(0)..20000022(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000017(0)..20000017(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20000018(0)..20000018(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20050000(0)..2005ffff(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[2000001d(0)..2000001d(ffffffff)]
2016-10-06@13:28:22.203 [server-main] adding range
[20020000(0)..2002ffff(ffffffff)]
2016-10-06@13:28:30.322 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:28:30.472 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:28:30.473 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:28:30.473 [tune-thread] PCM not available
2016-10-06@13:28:38.186 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:28:38.337 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:28:48.930 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:28:49.090 [brltty] command: 000018 (FWINRT: 前進一個點字視窗) -> 00001A
(FWINRTSKIP: 往前跳過空白點字視窗)
2016-10-06@13:28:49.091 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:28:49.092 [tune-thread] PCM not available
2016-10-06@13:29:16.329 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:29:16.329 [tune-thread] PCM not available
2016-10-06@13:29:20.425 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:29:20.425 [tune-thread] PCM not available
2016-10-06@13:29:44.976 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:29:44.976 [tune-thread] PCM not available
2016-10-06@13:29:47.761 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:29:47.761 [tune-thread] PCM not available
2016-10-06@13:30:23.922 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:24.022 [brltty] command: 000001 (LNUP: 跳上一行) -> 000005
(PRDIFLN: 往上跳到最近的不同行)
2016-10-06@13:30:30.983 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:31.133 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:30:31.582 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:31.732 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:30:34.132 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:34.232 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:30:34.951 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:35.052 [brltty] command: 000002 (LNDN: 下宜一行) -> 000006
(NXDIFLN: 下移到最近的不同內容行)
2016-10-06@13:30:35.053 [tune-thread] ALSA PCM open error: 裝置或系統資源忙碌中
2016-10-06@13:30:35.053 [tune-thread] PCM not available
2016-10-06@13:30:35.719 [brltty] command: 000000 (NOOP: 沒事)
2016-10-06@13:30:35.829 [brltty] command: 00001D (HOME: 跳到游標)
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
