Le 29/11/2016 à 12:15, Dave Mielke a écrit :
[quoted lines by André-Abush Clause on 2016/11/29 at 11:55 +0100]
Sorry, but this issue (with the VarioUltra) is not yet resolved.
I have tested with the last version of brltty available on github.
It is unusable on my Raspberry Pi running on Archlinux.
Could you please test a possible fix? On line 37 of Programs/ktb_translate.c,
you'll find:
#define ON_FIRST_RELEASE 1
Try changing 1 to 0. This will, of course, then require a rebuild.
Unfortunately, it changes nothing...
I have the following lines about kernel log:
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: new high-speed USB device
number 13 using dwc_otg
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: New USB device found,
idVendor=0904, idProduct=6102
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: New USB device strings:
Mfr=4, Product=5, SerialNumber=6
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: Product: VarioUltra40
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: Manufacturer: BAUM Systeme GmbH
Nov 29 14:20:04 alarmpi kernel: usb 1-1.4: SerialNumber:
a7af605f-7740-4dae-b329-202daf5ab80d
Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007:
usb_submit_urb(ctrl) failed: -1
Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007:
timeout initializing reports
Nov 29 14:20:14 alarmpi kernel: hid-generic 0003:0904:6102.0007:
hiddev0,hidraw2: USB HID v1.10 Device [BAUM Systeme GmbH VarioUltra40]
on usb-3f980000.usb-1.4/input0
Nov 29 14:21:26 alarmpi kernel: input: BRLTTY 5.4 Linux Screen Driver
Keyboard as /devices/virtual/input/input7
Nov 29 14:21:26 alarmpi kernel: usb 1-1.4: usbfs: interface 0 claimed
by usbhid while 'brltty' sets config #1
Nov 29 15:11:01 alarmpi kernel: usb 1-1.4: USB disconnect, device
number 13
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
