Hi! Currently I use an old Handy Tech Braille Star 80 display on USB. When navigating with the display, there is no sound from BRLTTY. I get lots of:
Nov 30 08:59:30 fox brltty[20907]: ioctl[KIOCSOUND] error 25: Inappropriate ioctl for device. in my logs. The information about the USB port is the following when connecting the cable: [ 1783.924022] usb 3-2: new full-speed USB device number 4 using uhci_hcd [ 1784.140519] usb 3-2: New USB device found, idVendor=0921, idProduct=1200 [ 1784.160640] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1784.182052] usb 3-2: Product: HandyLink USB [ 1784.182054] usb 3-2: Manufacturer: Handy Tech Elektronik GmbH [ 1784.182055] usb 3-2: SerialNumber: HL683 [ 1784.227602] belkin_sa 3-2:1.0: Belkin / Peracom / GoHubs USB Serial Adapter c onverter detected [ 1784.253553] usb 3-2: bcdDevice: 0101, bfc: 1 [ 1784.253627] usb 3-2: Belkin / Peracom / GoHubs USB Serial Adapter converter n ow attached to ttyUSB0 [ 1786.838566] belkin ttyUSB0: Set baudrate error [ 1787.619559] usb 3-2: usbfs: interface 0 claimed by belkin_sa while 'brltty' s ets config #1 [ 1787.651526] belkin ttyUSB0: Belkin / Peracom / GoHubs USB Serial Adapter conv erter now disconnected from ttyUSB0 [ 1787.682298] belkin_sa 3-2:1.0: device disconnected Is this a kernel driver problem, or can it be fixed from the BRLTTY side? Thanks and regards, Lars _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty