Hello Dave, Thank you for the anzwer! I have a focus 40 blue from freedom scientific but an older one... It is connected by usb. I tried to start brltty with parameters -b and -t but im not sure about -d. I tried with /dev/usb, without /dev just usb and the numbers 1 till 4, but nothing works. It would be ok if i could use espeak as driver without braile but -s es isn't working to. regards, charaya
--------- > Am 11.12.2016 um 18:58 schrieb Dave Mielke <[email protected]>: > > [quoted lines by Charaya on 2016/12/11 at 16:39 +0100] > >> oh and sorry for my bad english... > > Even if you really didn't know English very well, that wouldn't be a crime > and > is certainly nothing to apologize for. In any event, your English isn't all > that bad anyway. Now, if I were to try to speak your language, that'd > probably > be a total disaster. ;-) > >> My question refers to the first start of brltty from a gentoo minimal live >> cd. >> In the boot promt i write just brltty and there comes the brltty version >> (5.2) >> and it says rev unknown. > > It saying "rev unknown" is okay. That just means that it wasn't built from > within brltty's source repository. > > Are you seeing this message just in the system log, or also on your braille > display when brltty starts? > > Which kind of braille display are you using, and how is it connected to your > host? > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/ > > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
