System ubuntu live cd ddrescue 1.16 compiled with c++ from g++ c++ (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
Hi I was restoring a 1tb hard drive onto a 3tb hard drive and had most of the content from it copied. It had about 2mb of data which i was going to run a final run over after putting the hard drive in the freezer. However when it finished suddently the log file was only a single line (instead of having about 250 lines like it did during it's run) I should have kept a copy of the log file at that point but i didn't think of it. When i ran the ddrescue on it the last time the numbers were going up in TB's rather than KB or MB (So i did a Ctrl+C) This is the start of the log file # Rescue Logfile. Created by GNU ddrescue version 1.16 # Command line: ddrescue -d -f -r3 /dev/sdd /dev/sdb /media/storage/1tb.log # current_pos current_status 0x781D7A66F3CE00 ? # pos size status 0x00000000 0x2608B000 + 0x2608B000 0x00005000 * 0x26090000 0x00000200 - 0x26090200 0x00010000 * 0x260A0200 0x00000200 - 0x260A0400 0x00020000 * 0x260C0400 0x00000200 - 0x260C0600 0x00040000 * 0x26100600 0x00000200 - 0x26100800 0x00080000 * 0x26180800 0x00000200 - 0x26180A00 0x00100000 * 0x26280A00 0x00000200 - 0x26280C00 0x00200000 * 0x26480C00 0x00000200 - 0x26480E00 0x00400000 * 0x26880E00 0x00000200 - 0x26881000 0x00800000 * 0x27081000 0x00000200 - 0x27081200 0x01000000 * 0x28081200 0x00000200 - AND this is the end of the log file 0x781D7926F3C600 0x40000000 * 0x781D7966F3C600 0x00000200 - 0x781D7966F3C800 0x40000000 * 0x781D79A6F3C800 0x00000200 - 0x781D79A6F3CA00 0x40000000 * 0x781D79E6F3CA00 0x00000200 - 0x781D79E6F3CC00 0x40000000 * 0x781D7A26F3CC00 0x00000200 - 0x781D7A26F3CE00 0x40000000 * 0x781D7A66F3CE00 0x7F87E285990C31FF ? The log file is 2gb in total. The commands that i had run before that was ddrescue -f /dev/sdd /dev/sdb /media/storage/1tb.log Once that had finished i ran ddrescue -d -f -r3 /dev/sdd /dev/sdb /media/storage/1tb.log mkdir /dev/raw cd /dev/raw modprobe raw raw /dev/raw/raw1 /dev/sdd ddrescue -C -v -f -r3 /dev/raw/raw1 /dev/sdb /media/storage/1tb.log That command was running fine until it got to it's last section where it only left a single section in the log file. Did i do something wrong there? Or could this potentially be a bug? -- regards *Matthew Vukomanovic* Read this on how to become a computer expert: http://xkcd.com/627/<http://xkcd.com/627/>
_______________________________________________ Bug-ddrescue mailing list Bug-ddrescue@gnu.org https://lists.gnu.org/mailman/listinfo/bug-ddrescue
