On Jun 22, OKUJI Yoshinori <[EMAIL PROTECTED]> wrote:
>> I'm getting this error while installing grub from a floppy. The command
>> line is:
>>
>> install=(fd0)+1 (hd0,2) (hd0,2)/boot/grub/stage2 0x8000 p
> I guess your drive is >8GB and that is the cause, but you should
It's not.
>tell us the information about your drive (the geometry and the
>partition tables).
Disk /dev/hda: 16 heads, 63 sectors, 3280 cylinders
Units = cylinders of 1008 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 407 205096+ 6 DOS 16-bit >=32M
/dev/hda2 408 814 205128 83 Linux native
/dev/hda3 * 815 855 20664 83 Linux native
/dev/hda4 856 3280 1222200 5 Extended
/dev/hda5 856 1465 307408+ 83 Linux native
/dev/hda6 1466 1498 16600+ 82 Linux swap
/dev/hda7 1499 1904 204592+ 83 Linux native
/dev/hda8 1905 2310 204592+ 83 Linux native
/dev/hda9 2311 2920 307408+ 83 Linux native
/dev/hda10 2921 3280 181408+ 83 Linux native
/dev/hda:
Model=Maxtor 71687 AP, FwRev=4A3X1746, SerialNo=A500TTQA
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>5Mbs FmtGapReq }
RawCHS=3280/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=3(DualPortCache), BuffSize=128kB, MaxMultSect=32, MultSect=32
DblWordIO=yes, maxPIO=2(fast), DMA=yes, maxDMA=1(medium)
CurCHS=3280/16/63, CurSects=3306450, LBA=yes, LBAsects=3306450
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 *sword2 mword0 mword1 *mword2
IORDY=on/off, tPIO={min:180,w/IORDY:120}, PIO modes: mode3 mode4
--
ciao,
Marco
