Since there was at least one person in this list who showed interest
in this kind of stuff, here's a dirty "only-for-my-own-use" hack to
read bits from the parallel port in order to choose the menu entry
to be invoked beforehand.
The printf's and the ioperm are just to ease testing. I am using
a BCD encoder and this works for me under debian/slink.
/alessandro
Index: stage2/builtins.c
===================================================================
RCS file: /cvs/grub/stage2/builtins.c,v
retrieving revision 1.84.2.4
diff -u -d -r1.84.2.4 builtins.c
--- stage2/builtins.c 2000/10/19 19:50:58 1.84.2.4
+++ stage2/builtins.c 2000/10/24 17:52:44
@@ -23,6 +23,7 @@
WITHOUT_LIBC_STUBS here. */
#ifdef GRUB_UTIL
# include <stdio.h>
+# include <sys/perm.h>
#endif
#include <shared.h>
@@ -3969,6 +3970,59 @@
" installed. Any system address range maps are discarded."
};
+/*
+ * these are called inp and outp as inb/outb sometimes are there and
+ * sometimes are not there (as this file is compiled several times)
+ */
+static inline unsigned char inp(unsigned short port)
+{
+ unsigned char result;
+ __asm__ __volatile__("inb %w1,%0" : "=a" (result) : "Nd" (port));
+ return result;
+}
+static inline void outp(unsigned char value, unsigned short port)
+{
+ __asm__ __volatile__("outb %b0,%w1" : : "a" (value), "Nd" (port));
+}
+
+/*
+ * defaultfromlpt:
+ * This command is a custom hack, not generic enough to be distributed.
+ */
+static int
+defaultfromlpt_func (char *arg, int flags)
+{
+ unsigned char val1, val2;
+ /*
+ * First check that something is connected to the parallel port. I don't
+ * know what happens if a printer is there: mine is either unused or with
+ * a boot-selector */
+#ifdef GRUB_UTIL
+ ioperm(0x378,4,1);
+#endif
+ outp(0x00, 0x378); val1 = inp(0x379);
+ outp(0xFF, 0x378); val2 = inp(0x379);
+ if (val1 == val2) {
+ grub_printf("nothing on lpt\n");
+ return 0;
+ }
+ /* re-read port after this small delay */
+ val1 = (inp(0x379) >> 4) ^ 7;
+ grub_printf("default is now %d\n", val1);
+ default_entry = val1;
+ return 0;
+}
+
+static struct builtin custom_defaultfromlpt =
+{
+ "defaultfromlpt",
+ defaultfromlpt_func,
+ BUILTIN_CMDLINE | BUILTIN_MENU, /* use both, so I can test it */
+ "defaultfromlpt",
+ "Reads bits 4-7 of the printer port at 0x379; inverts the low "
+ "three bits and uses the result as default entry to boot."
+};
+
/* The table of builtin commands. Sorted in dictionary order. */
struct builtin *builtin_table[] =
@@ -3985,6 +4039,7 @@
&builtin_configfile,
&builtin_debug,
&builtin_default,
+ &custom_defaultfromlpt, /* they must be ordered. No comment */
#ifdef GRUB_UTIL
&builtin_device,
#endif /* GRUB_UTIL */
_______________________________________________
Bug-grub mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/bug-grub
