Hi all, I was asked to report the failure of grup to be upgraded here. What follows is the output of "/usr/sbin/grub-probe --device-map=/boot/grub/device.map --target=fs -v /boot/grub":
build5:~# /usr/sbin/grub-probe --device-map=/boot/grub/device.map --target=fs -v /boot/grub >/tmp/grub-failure.txt /usr/sbin/grub-probe: info: Cannot stat `/dev/disk/by-id/scsi-SATA_ST3300831AS_3NF0GST8', skipping. /usr/sbin/grub-probe: info: Cannot stat `/dev/disk/by-id/scsi-SATA_ST3300831AS_3NF0H7L9', skipping. /usr/sbin/grub-probe: info: changing current directory to /dev. /usr/sbin/grub-probe: info: changing current directory to dri. /usr/sbin/grub-probe: info: changing current directory to snd. /usr/sbin/grub-probe: info: changing current directory to net. /usr/sbin/grub-probe: info: changing current directory to shm. /usr/sbin/grub-probe: info: opening md0. /usr/sbin/grub-probe: error: no such disk. I should probably mention that there was a problem during the upgrade. This machine runs entirely on a software RAID1 (no boot partition, and root is mounted on /dev/md0). During the upgrade to squeeze, mdadm found that the device ID for md0 had changed. I updated the /etc/mdadm/mdadm.conf file, but forgot to run update-initramfs, and then subsequent boots failed until I booted into rescue mode and ran the command from the rescue shell. The system now boots, using the chainloader. However, during the boot process I also get error messages that some information could not be read from the drives. Detailed log files are available if needed. -- best regards Wolfgang Amino | Mob: +44 7554 457 455 | Desk: +44 1954 234 190 | skype: wszachauamino _______________________________________________ Bug-grub mailing list [email protected] https://lists.gnu.org/mailman/listinfo/bug-grub
