Hello GRUB developers,
I would like to inform you about annoying error that appears on my
screen during the startup process every time I turn on the computer:
"failure writing sector 0x21c8800 to 'hd0'
press any key to continue..."
Here's my scenario:
Optimus laptop Lenovo Y700-17ISK (Intel Core i7-6700HQ/RAM 16GB/SSD
512GB/Nvidia GTX960M 4GB)
BIOS CDCN35WW 03/29/2016
EFI v2.40 by LENOVO
Operating system: Ubuntu 16.04, kernel 4.4.X; kernel 4.6.2; kernel
4.7-rc3.
This bug does not prevent the system from booting - both if I press or
if I don't press any key system after 10-15 seconds continue to boot up
before the Ubuntu wallpaper appears when it asks me for username and
password. Recently I installed Windows 10 alongside with Ubuntu. Windows
boots up fast and perfectly fine without any error. I used some tools
which says that SSD health is excellent.
Thanks in advance for any help, please find attached my dmesg output.
Aljosa
[ 0.000000] Linux version 4.6.2-040602-generic (kernel@gloin) (gcc version
5.3.1 20160528 (Ubuntu 5.3.1-21ubuntu11) ) #201606100516 SMP Fri Jun 10
09:18:34 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic
root=UUID=cad730b3-726d-4c07-838e-92175ae6fca9 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088
bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006f692fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f693000-0x000000006f693fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006f694000-0x000000006f6ddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006f6de000-0x000000006f789fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f78a000-0x0000000070089fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007008a000-0x000000008558efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008558f000-0x000000008578efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000008578f000-0x0000000085f7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000085f7f000-0x0000000087f7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000087f7f000-0x0000000087ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008e7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004707fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by LENOVO
[ 0.000000] efi: SMBIOS=0x85803000 ESRT=0x85801f18 ACPI 2.0=0x87ffe014
[ 0.000000] esrt: Reserving ESRT space from 0x0000000085801f18 to
0x0000000085801f50.
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 80Q0/Allsparks 7A, BIOS CDCN35WW 03/29/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x470800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0088000000 mask 7FF8000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 30848M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose
cover RAM: 0G
[ 0.000000] e820: update [mem 0x88000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x88000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0316c000, 0x0316cfff] PGTABLE
[ 0.000000] BRK [0x0316d000, 0x0316dfff] PGTABLE
[ 0.000000] BRK [0x0316e000, 0x0316efff] PGTABLE
[ 0.000000] BRK [0x0316f000, 0x0316ffff] PGTABLE
[ 0.000000] BRK [0x03170000, 0x03170fff] PGTABLE
[ 0.000000] BRK [0x03171000, 0x03171fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33a6c000-0x35d2dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000087FFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000087FC5188 0000D4 (v01 LENOVO CB-01
00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000087FEE000 0000F4 (v05 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000087FCC000 01D363 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000087F60000 000040
[ 0.000000] ACPI: UEFI 0x0000000087FFD000 000236 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000087FFC000 000042 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: POAT 0x0000000087FFB000 000055 (v03 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF5000 005104 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000087FF4000 000034 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x0000000087FF3000 000061 (v00 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FF2000 00077C (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x0000000087FF1000 0000A5 (v32 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x0000000087FF0000 000034 (v07 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000087FEF000 000028 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000087FED000 000038 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x0000000087FEC000 000094 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000087FEB000 0000BC (v03 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000087FEA000 00003C (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCB000 0002D4 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FCA000 00019A (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FC9000 0003F4 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000087FC8000 000E58 (v02 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000087FC7000 0000A8 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000087FC6000 000044 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000087FC4000 000038 (v01 LENOVO CB-01
00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004707fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x4707d1000-0x4707fbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000004707fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000085fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006f692fff]
[ 0.000000] node 0: [mem 0x000000006f6de000-0x000000006f789fff]
[ 0.000000] node 0: [mem 0x000000007008a000-0x000000008558efff]
[ 0.000000] node 0: [mem 0x0000000087fff000-0x0000000087ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000004707fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004707fffff]
[ 0.000000] On node 0 totalpages: 4150217
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3972 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8434 pages used for memmap
[ 0.000000] DMA32 zone: 539717 pages, LIFO batch:31
[ 0.000000] Normal zone: 56352 pages used for memmap
[ 0.000000] Normal zone: 3606528 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x8a800000-0x8e7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6f693000-0x6f693fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6f694000-0x6f6ddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6f78a000-0x70089fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8558f000-0x8578efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8578f000-0x85f7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x85f7f000-0x87f7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87f7f000-0x87ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8e7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0x8e800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff880470400000 s93464 r8192
d29416 u262144
[ 0.000000] pcpu-alloc: s93464 r8192 d29416 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 4085345
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.2-040602-generic
root=UUID=cad730b3-726d-4c07-838e-92175ae6fca9 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16172428K/16600868K available (6805K kernel code, 1330K
rwdata, 3076K rodata, 1764K init, 2420K bss, 428440K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:2048 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2591.873 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5183.74 BogoMIPS (lpj=10367492)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000034] ACPI: Core revision 20160108
[ 0.025194] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup
failure, AE_NOT_FOUND (20160108/dswload-210)
[ 0.025199] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog
(20160108/psobject-227)
[ 0.025230] ACPI Exception: AE_NOT_FOUND, (SSDT:CB-01 ) while loading
table (20160108/tbxfload-227)
[ 0.028760] ACPI Error: 1 table load failures, 6 successful
(20160108/tbxfload-247)
[ 0.032231] Security Framework initialized
[ 0.032234] Yama: becoming mindful.
[ 0.032241] AppArmor: AppArmor initialized
[ 0.033128] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes)
[ 0.035899] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.037067] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.037083] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.037339] CPU: Physical Processor ID: 0
[ 0.037341] CPU: Processor Core ID: 0
[ 0.037344] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.037345] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037349] mce: CPU supports 10 MCE banks
[ 0.037367] CPU0: Thermal monitoring enabled (TM1)
[ 0.037377] process: using mwait in idle threads
[ 0.037379] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.037380] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.037687] Freeing SMP alternatives memory: 24K (ffffffff81f07000 -
ffffffff81f0d000)
[ 0.045878] ftrace: allocating 27464 entries in 108 pages
[ 0.056363] smpboot: Max logical packages: 2
[ 0.056365] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.056373] DMAR: Host address width 39
[ 0.056374] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.056379] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462
ecap 7e3ff0501e
[ 0.056380] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.056383] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462
ecap f050da
[ 0.056384] DMAR: RMRR base: 0x00000085e5a000 end: 0x00000085e79fff
[ 0.056386] DMAR: RMRR base: 0x0000008a000000 end: 0x0000008e7fffff
[ 0.056387] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.056388] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.056389] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.056390] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS
setting.
[ 0.057805] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.057808] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.061929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.101620] TSC deadline timer enabled
[ 0.101625] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
(family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.101639] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events,
full-width counters, Intel PMU driver.
[ 0.101665] ... version: 4
[ 0.101666] ... bit width: 48
[ 0.101666] ... generic registers: 4
[ 0.101667] ... value mask: 0000ffffffffffff
[ 0.101668] ... max period: 0000ffffffffffff
[ 0.101669] ... fixed-purpose events: 3
[ 0.101669] ... event mask: 000000070000000f
[ 0.102237] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.102294] x86: Booting SMP configuration:
[ 0.102295] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.663842] x86: Booted up 1 node, 8 CPUs
[ 0.663845] smpboot: Total of 8 processors activated (41477.07 BogoMIPS)
[ 0.671973] devtmpfs: initialized
[ 0.672022] x86/mm: Memory block size: 128MB
[ 0.674410] evm: security.selinux
[ 0.674411] evm: security.SMACK64
[ 0.674412] evm: security.SMACK64EXEC
[ 0.674412] evm: security.SMACK64TRANSMUTE
[ 0.674413] evm: security.SMACK64MMAP
[ 0.674414] evm: security.ima
[ 0.674415] evm: security.capability
[ 0.674464] PM: Registering ACPI NVS region [mem 0x6f693000-0x6f693fff]
(4096 bytes)
[ 0.674465] PM: Registering ACPI NVS region [mem 0x85f7f000-0x87f7efff]
(33554432 bytes)
[ 0.674842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.674904] pinctrl core: initialized pinctrl subsystem
[ 0.675064] RTC time: 14:31:17, date: 06/13/16
[ 0.675164] NET: Registered protocol family 16
[ 0.683557] cpuidle: using governor ladder
[ 0.695558] cpuidle: using governor menu
[ 0.695567] PCCT header not found.
[ 0.695634] Simple Boot Flag at 0x44 set to 0x1
[ 0.695681] ACPI: bus type PCI registered
[ 0.695682] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.695766] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.695768] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.695776] PCI: Using configuration type 1 for base access
[ 0.711703] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.711704] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.711941] ACPI: Added _OSI(Module Device)
[ 0.711943] ACPI: Added _OSI(Processor Device)
[ 0.711944] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.711945] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.712824] ACPI: Executed 18 blocks of module-level executable AML code
[ 0.720216] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.724823] ACPI: Dynamic OEM Table Load:
[ 0.724848] ACPI: SSDT 0xFFFF88045D4E2000 0005DC (v02 PmRef Cpu0Ist
00003000 INTL 20130117)
[ 0.725617] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.729057] ACPI: Dynamic OEM Table Load:
[ 0.729064] ACPI: SSDT 0xFFFF88045D149000 00037F (v02 PmRef Cpu0Cst
00003001 INTL 20130117)
[ 0.732251] ACPI: Dynamic OEM Table Load:
[ 0.732258] ACPI: SSDT 0xFFFF88045D4E2800 0005AA (v02 PmRef ApIst
00003000 INTL 20130117)
[ 0.733210] ACPI: Dynamic OEM Table Load:
[ 0.733215] ACPI: SSDT 0xFFFF88045D11DC00 000119 (v02 PmRef ApCst
00003000 INTL 20130117)
[ 0.749429] ACPI : EC: EC started
[ 0.752156] ACPI: Interpreter enabled
[ 0.752193] ACPI: (supports S0 S3 S4 S5)
[ 0.752194] ACPI: Using IOAPIC for interrupt routing
[ 0.752224] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.771326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.771331] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.773710] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 0.775291] PCI host bridge to bus 0000:00
[ 0.775294] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.775296] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.775297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.775298] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff
window]
[ 0.775299] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff
window]
[ 0.775300] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff
window]
[ 0.775302] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff
window]
[ 0.775303] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.775304] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.775305] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.775306] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.775307] pci_bus 0000:00: root bus resource [mem 0x8e800000-0xdfffffff
window]
[ 0.775308] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff
window]
[ 0.775310] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.775316] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[ 0.776126] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[ 0.776134] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.776140] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit
pref]
[ 0.776144] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.776865] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.776883] pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit]
[ 0.776952] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.777586] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.777652] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.777685] pci 0000:00:16.0: reg 0x10: [mem 0xa132a000-0xa132afff 64bit]
[ 0.777801] pci 0000:00:16.0: PME# supported from D3hot
[ 0.778480] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.778494] pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff]
[ 0.778502] pci 0000:00:17.0: reg 0x14: [mem 0xa132d000-0xa132d0ff]
[ 0.778509] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087]
[ 0.778517] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b]
[ 0.778524] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.778532] pci 0000:00:17.0: reg 0x24: [mem 0xa132b000-0xa132b7ff]
[ 0.778572] pci 0000:00:17.0: PME# supported from D3hot
[ 0.779238] pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
[ 0.779301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.779951] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.779985] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.780047] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.780694] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.780724] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.780786] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.781439] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.781490] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[ 0.782239] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.782251] pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff]
[ 0.782955] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.782979] pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit]
[ 0.783013] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit]
[ 0.783064] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.783740] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.783776] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.783822] pci 0000:00:1f.4: reg 0x10: [mem 0xa132c000-0xa132c0ff 64bit]
[ 0.783892] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f]
[ 0.786482] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 0.786501] pci 0000:01:00.0: reg 0x10: [mem 0xa1201000-0xa1201fff]
[ 0.786513] pci 0000:01:00.0: reg 0x14: [mem 0xa1200000-0xa12007ff]
[ 0.786634] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.786669] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.796328] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.796333] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.796610] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.796693] pci 0000:02:00.0: reg 0x10: [mem 0xa1100000-0xa1101fff 64bit]
[ 0.796969] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.797119] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.806945] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.806949] pci 0000:00:1c.2: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.807006] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.807024] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.807051] pci 0000:03:00.0: reg 0x18: [mem 0xa1004000-0xa1004fff 64bit]
[ 0.807068] pci 0000:03:00.0: reg 0x20: [mem 0xa1000000-0xa1003fff 64bit]
[ 0.807158] pci 0000:03:00.0: supports D1 D2
[ 0.807159] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.807205] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.814529] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.814532] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.814534] pci 0000:00:1c.3: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.816140] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816185] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.816228] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816269] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816310] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816393] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.816726] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.816802] ACPI : EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.816891] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.816892] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.816894] vgaarb: loaded
[ 0.816895] vgaarb: bridge control possible 0000:00:02.0
[ 0.817184] PCI: Using ACPI for IRQ routing
[ 0.845187] PCI: pci_cache_line_size set to 64 bytes
[ 0.849288] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.849289] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.849290] e820: reserve RAM buffer [mem 0x6f693000-0x6fffffff]
[ 0.849291] e820: reserve RAM buffer [mem 0x6f78a000-0x6fffffff]
[ 0.849292] e820: reserve RAM buffer [mem 0x8558f000-0x87ffffff]
[ 0.849293] e820: reserve RAM buffer [mem 0x470800000-0x473ffffff]
[ 0.849383] NetLabel: Initializing
[ 0.849384] NetLabel: domain hash size = 128
[ 0.849385] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.849394] NetLabel: unlabeled traffic allowed by default
[ 0.849507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.849511] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.851562] clocksource: Switched to clocksource hpet
[ 0.856080] VFS: Disk quotas dquot_6.6.0
[ 0.856117] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.856191] AppArmor: AppArmor Filesystem Enabled
[ 0.856231] pnp: PnP ACPI init
[ 0.856342] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.856344] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.856346] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.856347] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.856348] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.856350] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.856351] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.856354] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.856587] system 00:01: [io 0x2000-0x20fe] has been reserved
[ 0.856589] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.857234] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.857235] system 00:02: [io 0xffff] has been reserved
[ 0.857236] system 00:02: [io 0xffff] has been reserved
[ 0.857238] system 00:02: [io 0xffff] has been reserved
[ 0.857239] system 00:02: [io 0x1800-0x18fe] could not be reserved
[ 0.857240] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.857242] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.857311] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.857313] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.857331] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.857361] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.857363] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02
(active)
[ 0.857384] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.857407] pnp 00:07: Plug and Play ACPI device, IDs SYN2b5d PNP0f03
(active)
[ 0.858308] system 00:08: [mem 0xfe035000-0xfe035fff] has been reserved
[ 0.858309] system 00:08: [mem 0xfe034008-0xfe034fff] has been reserved
[ 0.858311] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.858312] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.858313] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.858315] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.858688] system 00:09: [mem 0xfe034000-0xfe034007] has been reserved
[ 0.858690] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.858838] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.858840] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.858841] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.858843] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.858844] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.858845] system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.858847] system 00:0a: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.858848] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.858850] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.858851] system 00:0a: [mem 0x8e800000-0x8e81ffff] has been reserved
[ 0.858853] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.859229] pnp: PnP ACPI: found 11 devices
[ 0.867391] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.867414] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.867418] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.867424] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.867428] pci 0000:00:1c.2: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.867434] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.867436] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.867439] pci 0000:00:1c.3: bridge window [mem 0xa1000000-0xa10fffff]
[ 0.867446] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.867447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.867449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.867450] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.867451] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.867452] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.867453] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.867455] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.867456] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.867457] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.867458] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.867459] pci_bus 0000:00: resource 15 [mem 0x8e800000-0xdfffffff window]
[ 0.867460] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.867462] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
[ 0.867463] pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
[ 0.867464] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.867465] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa10fffff]
[ 0.867489] NET: Registered protocol family 2
[ 0.867666] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.867838] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.867922] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.867944] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.867980] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.868039] NET: Registered protocol family 1
[ 0.868050] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.873535] PCI: CLS 64 bytes, default 64
[ 0.873566] Unpacking initramfs...
[ 1.386769] Freeing initrd memory: 35592K (ffff880033a6c000 -
ffff880035d2e000)
[ 1.386789] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.386791] software IO TLB [mem 0x810e5000-0x850e5000] (64MB) mapped at
[ffff8800810e5000-ffff8800850e4fff]
[ 1.386920] Scanning for low memory corruption every 60 seconds
[ 1.387210] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.387241] audit: initializing netlink subsys (disabled)
[ 1.387250] audit: type=2000 audit(1465828277.380:1): initialized
[ 1.387645] Initialise system trusted keyring
[ 1.387954] workingset: timestamp_bits=33 max_order=22 bucket_order=0
[ 1.389279] zbud: loaded
[ 1.389459] Key type big_key registered
[ 1.390470] Key type asymmetric registered
[ 1.390473] Asymmetric key parser 'x509' registered
[ 1.390507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
247)
[ 1.390608] io scheduler noop registered
[ 1.390610] io scheduler deadline registered (default)
[ 1.390633] io scheduler cfq registered
[ 1.391187] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 1.391209] aer 0000:00:1c.3:pcie02: service driver aer loaded
[ 1.391221] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.391222] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.391225] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.391240] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.391241] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.391243] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.391250] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.391251] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.391254] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.391258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.391263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.391292] efifb: probing for efifb
[ 1.391303] efifb: framebuffer at 0x90000000, mapped to 0xffffc90002000000,
using 8128k, total 8128k
[ 1.391304] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.391305] efifb: scrolling: redraw
[ 1.391306] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.395046] Console: switching to colour frame buffer device 240x67
[ 1.398672] fb0: EFI VGA frame buffer device
[ 1.398679] intel_idle: MWAIT substates: 0x11142120
[ 1.398680] intel_idle: v0.4.1 model 0x5E
[ 1.399010] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.399044] GHES: HEST is not enabled!
[ 1.399122] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.402206] PPP generic driver version 2.4.2
[ 1.402283] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 1.406944] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.406948] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.407118] mousedev: PS/2 mouse device common for all mice
[ 1.407224] rtc_cmos 00:04: RTC can wake from S4
[ 1.407898] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.407978] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 1.407995] Intel P-state driver initializing.
[ 1.416350] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.519824] intel_pstate: HWP enabled
[ 1.519834] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.520231] NET: Registered protocol family 10
[ 1.520829] NET: Registered protocol family 17
[ 1.521214] microcode: CPU0 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521257] microcode: CPU1 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521315] microcode: CPU2 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521373] microcode: CPU3 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521392] microcode: CPU4 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521450] microcode: CPU5 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521508] microcode: CPU6 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521584] microcode: CPU7 sig=0x506e3, pf=0x20, revision=0x74
[ 1.521753] microcode: Microcode Update Driver: v2.01
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.522395] registered taskstats version 1
[ 1.522406] Loading compiled-in X.509 certificates
[ 1.525052] Loaded X.509 cert 'Build time autogenerated kernel key:
5416e2c482d66dd0c34159ae8c9fc4066f19244c'
[ 1.525071] zswap: loaded using pool lzo/zbud
[ 1.529336] Key type encrypted registered
[ 1.529341] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.529344] ima: No TPM chip found, activating TPM-bypass!
[ 1.529358] evm: HMAC attrs: 0x1
[ 1.534301] Magic number: 4:937:535
[ 1.534310] tty ttyS15: hash matches
[ 1.534705] rtc_cmos 00:04: setting system clock to 2016-06-13 14:31:18 UTC
(1465828278)
[ 1.535084] PM: Hibernation image not present or could not be loaded.
[ 1.536459] Freeing unused kernel memory: 1764K (ffffffff81d4e000 -
ffffffff81f07000)
[ 1.536460] Write protecting the kernel read-only data: 12288k
[ 1.537308] Freeing unused kernel memory: 1372K (ffff8800026a9000 -
ffff880002800000)
[ 1.538930] Freeing unused kernel memory: 1020K (ffff880002b01000 -
ffff880002c00000)
[ 1.549157] random: systemd-udevd urandom read with 7 bits of entropy
available
[ 1.567088] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.567272] ACPI: Lid Switch [LID0]
[ 1.567321] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.567412] ACPI: Power Button [PWRB]
[ 1.567459] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 1.567492] ACPI: Sleep Button [SLPB]
[ 1.567538] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.567831] ACPI: Power Button [PWRF]
[ 1.568220] FUJITSU Extended Socket Network Device Driver - version 1.0 -
Copyright (c) 2015 FUJITSU LIMITED
[ 1.569880] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.589775] wmi: Mapper loaded
[ 1.590755] [Firmware Bug]: No valid trip found
[ 1.591254] [Firmware Bug]: No valid trip found
[ 1.592907] Linux agpgart interface v0.103
[ 1.596047] sdhci: Secure Digital Host Controller Interface driver
[ 1.596049] sdhci: Copyright(c) Pierre Ossman
[ 1.596960] SCSI subsystem initialized
[ 1.597729] sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev
1)
[ 1.597732] ACPI: bus type USB registered
[ 1.597750] usbcore: registered new interface driver usbfs
[ 1.597758] usbcore: registered new interface driver hub
[ 1.597779] usbcore: registered new device driver usb
[ 1.601663] mmc0: Unknown controller version (3). You may experience
problems.
[ 1.601716] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.604764] mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
[ 1.605419] [drm] Initialized drm 1.1.0 20060810
[ 1.607986] libata version 3.00 loaded.
[ 1.608815] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.608821] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 1
[ 1.608982] r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc900018ee000,
50:7b:9d:69:cc:cb, XID 14100800 IRQ 125
[ 1.608984] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx
checksumming: ko]
[ 1.610083] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100
quirks 0x00109810
[ 1.610088] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.610249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.610251] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.610252] usb usb1: Product: xHCI Host Controller
[ 1.610253] usb usb1: Manufacturer: Linux 4.6.2-040602-generic xhci-hcd
[ 1.610255] usb usb1: SerialNumber: 0000:00:14.0
[ 1.610406] hub 1-0:1.0: USB hub found
[ 1.610478] hub 1-0:1.0: 16 ports detected
[ 1.620348] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.620353] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 1.620418] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.620420] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.620421] usb usb2: Product: xHCI Host Controller
[ 1.620423] usb usb2: Manufacturer: Linux 4.6.2-040602-generic xhci-hcd
[ 1.620439] usb usb2: SerialNumber: 0000:00:14.0
[ 1.620617] hub 2-0:1.0: USB hub found
[ 1.620647] hub 2-0:1.0: 8 ports detected
[ 1.626482] ahci 0000:00:17.0: version 3.0
[ 1.626857] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf
impl SATA mode
[ 1.626886] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum
part ems deso sadm sds apst
[ 1.647982] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 1.656777] scsi host0: ahci
[ 1.657322] scsi host1: ahci
[ 1.657902] scsi host2: ahci
[ 1.658309] scsi host3: ahci
[ 1.658375] ata1: SATA max UDMA/133 abar m2048@0xa132b000 port 0xa132b100
irq 127
[ 1.658379] ata2: SATA max UDMA/133 abar m2048@0xa132b000 port 0xa132b180
irq 127
[ 1.658383] ata3: SATA max UDMA/133 abar m2048@0xa132b000 port 0xa132b200
irq 127
[ 1.658385] ata4: SATA max UDMA/133 abar m2048@0xa132b000 port 0xa132b280
irq 127
[ 1.660684] [drm] Memory usable by graphics device = 4096M
[ 1.660687] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[ 1.660688] fb: switching to inteldrmfb from EFI VGA
[ 1.660701] Console: switching to colour dummy device 80x25
[ 1.660798] [drm] Replacing VGA console driver
[ 1.667386] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.667387] [drm] Driver supports precise vblank timestamp query.
[ 1.674413] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 1.677950] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.691149] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.691328] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.691556] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 1.815950] fbcon: inteldrmfb (fb0) is primary device
[ 1.931803] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 1.970349] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.970373] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.970449] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.970522] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.973461] ata1.00: ATA-9: LITEON CV1-8B512, G896201, max UDMA/133
[ 1.973462] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.974448] ata1.00: configured for UDMA/133
[ 1.975262] scsi 0:0:0:0: Direct-Access ATA LITEON CV1-8B512 201
PQ: 0 ANSI: 5
[ 2.062573] usb 1-2: New USB device found, idVendor=062a, idProduct=3633
[ 2.062574] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.062575] usb 1-2: Product: Full-Speed Mouse
[ 2.062576] usb 1-2: Manufacturer: Full-Speed Mouse
[ 2.066289] usbcore: registered new interface driver usbhid
[ 2.066289] usbhid: USB HID core driver
[ 2.068398] input: Full-Speed Mouse Full-Speed Mouse as
/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:062A:3633.0001/input/input8
[ 2.068743] hid-generic 0003:062A:3633.0001: input,hiddev0,hidraw0: USB HID
v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:14.0-2/input0
[ 2.227879] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.357932] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[ 2.357933] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.357933] usb 1-3: Product: USB2.0 Hub
[ 2.358717] hub 1-3:1.0: USB hub found
[ 2.359069] hub 1-3:1.0: 4 ports detected
[ 2.383850] tsc: Refined TSC clocksource calibration: 2591.999 MHz
[ 2.383852] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x255cb5c6a11, max_idle_ns: 440795249002 ns
[ 2.477349] psmouse serio1: synaptics: queried max coordinates: x [..5660],
y [..4570]
[ 2.517480] psmouse serio1: synaptics: queried min coordinates: x [1364..],
y [1284..]
[ 2.527716] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[ 2.595309] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3105, fw id: 1873641
[ 2.647722] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input6
[ 2.692381] usb 1-6: New USB device found, idVendor=5986, idProduct=0672
[ 2.692382] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.692382] usb 1-6: Product: Lenovo EasyCamera
[ 2.692383] usb 1-6: Manufacturer: Bison
[ 2.692383] usb 1-6: SerialNumber: 200901010001
[ 2.736044] [drm] RC6 on
[ 2.807755] usb 1-11: new full-speed USB device number 5 using xhci_hcd
[ 2.937351] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b
[ 2.937352] usb 1-11: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 3.003830] Console: switching to colour frame buffer device 240x67
[ 3.006481] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.019965] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512
GB/477 GiB)
[ 3.019994] sd 0:0:0:0: [sda] Write Protect is off
[ 3.019996] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.020001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.024209] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 3.024815] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.094682] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
(null)
[ 3.249372] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.249498] systemd[1]: Detected architecture x86-64.
[ 3.249667] systemd[1]: Set hostname to <anonimux>.
[ 3.298627] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 3.298773] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 3.298811] systemd[1]: Reached target User and Group Name Lookups.
[ 3.298847] systemd[1]: Reached target Encrypted Volumes.
[ 3.298887] systemd[1]: Listening on udev Kernel Socket.
[ 3.298927] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.299032] systemd[1]: Listening on Journal Audit Socket.
[ 3.299077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.299152] systemd[1]: Created slice User and Session Slice.
[ 3.299188] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.299222] systemd[1]: Reached target Remote File Systems.
[ 3.299293] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.299331] systemd[1]: Listening on Syslog Socket.
[ 3.299378] systemd[1]: Listening on Journal Socket.
[ 3.299449] systemd[1]: Created slice System Slice.
[ 3.299518] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.315939] systemd[1]: Starting Load Kernel Modules...
[ 3.316267] systemd[1]: Mounting Huge Pages File System...
[ 3.317151] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 3.317238] systemd[1]: Created slice system-getty.slice.
[ 3.317576] systemd[1]: Starting Uncomplicated firewall...
[ 3.317914] systemd[1]: Started Read required files in advance.
[ 3.318697] systemd[1]: Starting Journal Service...
[ 3.318747] systemd[1]: Reached target Slices.
[ 3.319189] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.319601] systemd[1]: Mounting Debug File System...
[ 3.320229] systemd[1]: Started Braille Device Support.
[ 3.320364] systemd[1]: Listening on udev Control Socket.
[ 3.321246] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ 3.322375] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.327194] systemd[1]: Mounted Debug File System.
[ 3.327233] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.327267] systemd[1]: Mounted Huge Pages File System.
[ 3.330892] lp: driver loaded but no devices found
[ 3.334086] ppdev: user-space parallel port driver
[ 3.338709] systemd[1]: Started Load Kernel Modules.
[ 3.339362] systemd[1]: Starting Apply Kernel Variables...
[ 3.343922] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.345364] systemd[1]: Started Apply Kernel Variables.
[ 3.349368] systemd[1]: Started Create Static Device Nodes in /dev.
[ 3.349950] systemd[1]: Starting udev Kernel Device Manager...
[ 3.354369] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 3.370381] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.384138] clocksource: Switched to clocksource tsc
[ 3.386767] systemd[1]: Started Journal Service.
[ 3.392608] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 3.398184] systemd-journald[241]: Received request to flush runtime journal
from PID 1
[ 3.438258] ACPI: AC Adapter [ADP0] (on-line)
[ 3.454106] Bluetooth: Core ver 2.21
[ 3.454115] NET: Registered protocol family 31
[ 3.454116] Bluetooth: HCI device and connection manager initialized
[ 3.454118] Bluetooth: HCI socket layer initialized
[ 3.454119] Bluetooth: L2CAP socket layer initialized
[ 3.454122] Bluetooth: SCO socket layer initialized
[ 3.473287] ACPI: Battery Slot [BAT0] (battery present)
[ 3.475504] input: Ideapad extra buttons as
/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9
[ 3.479918] random: nonblocking pool is initialized
[ 3.516522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.516993] EFI Variables Facility v0.08 2004-May-17
[ 3.519935] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.529700] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.530707] Bluetooth: HCI UART driver ver 2.3
[ 3.530710] Bluetooth: HCI UART protocol H4 registered
[ 3.530710] Bluetooth: HCI UART protocol BCSP registered
[ 3.530711] Bluetooth: HCI UART protocol LL registered
[ 3.530712] Bluetooth: HCI UART protocol ATH3K registered
[ 3.530713] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.530731] Bluetooth: HCI UART protocol Intel registered
[ 3.530742] Bluetooth: HCI UART protocol BCM registered
[ 3.530743] Bluetooth: HCI UART protocol QCA registered
[ 3.530744] Bluetooth: HCI UART protocol AG6XX registered
[ 3.543392] media: Linux media interface: v0.10
[ 3.548337] usbcore: registered new interface driver btusb
[ 3.548613] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 3.553312] Bluetooth: hci0: Device revision is 5
[ 3.553314] Bluetooth: hci0: Secure boot is enabled
[ 3.553315] Bluetooth: hci0: OTP lock is enabled
[ 3.553316] Bluetooth: hci0: API lock is enabled
[ 3.553317] Bluetooth: hci0: Debug lock is disabled
[ 3.553319] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 3.563425] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 3.568429] Linux video capture interface: v2.00
[ 3.569065] pstore: Registered efi as persistent store backend
[ 3.578443] AVX2 version of gcm_enc/dec engaged.
[ 3.578445] AES CTR mode by8 optimization enabled
[ 3.590647] Intel(R) Wireless WiFi driver for Linux
[ 3.590649] Copyright(c) 2003- 2015 Intel Corporation
[ 3.592459] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0672)
[ 3.593239] iwlwifi 0000:02:00.0: Unsupported splx structure
[ 3.595311] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended
Controls Unit was not initialized!
[ 3.595314] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not
initialized!
[ 3.595316] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not
initialized!
[ 3.595318] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not
initialized!
[ 3.595382] input: Lenovo EasyCamera as
/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input10
[ 3.595431] usbcore: registered new interface driver uvcvideo
[ 3.595433] USB Video Class driver (1.1.1)
[ 3.596390] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-8000C-21.ucode failed with error -2
[ 3.596402] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-8000C-20.ucode failed with error -2
[ 3.596409] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-8000C-19.ucode failed with error -2
[ 3.596415] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-8000C-18.ucode failed with error -2
[ 3.596419] iwlwifi 0000:02:00.0: Direct firmware load for
iwlwifi-8000C-17.ucode failed with error -2
[ 3.617519] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0
op_mode iwlmvm
[ 3.617807] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 3.633103] Adding 16600060k swap on /dev/sda6. Priority:-1 extents:1
across:16600060k SSFS
[ 3.643381] intel_rapl: Found RAPL domain package
[ 3.643384] intel_rapl: Found RAPL domain core
[ 3.643386] intel_rapl: Found RAPL domain uncore
[ 3.643388] intel_rapl: Found RAPL domain dram
[ 3.652712] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC
8260, REV=0x208
[ 3.652975] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 3.653791] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 3.660148] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.660151] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.660152] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 3.660153] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.660154] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.660155] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 3.660156] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 3.669822] Bluetooth: hci0: Failed to send firmware data (-38)
[ 3.694311] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 3.694351] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 3.694384] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 3.694416] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 3.694447] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.766392] audit: type=1400 audit(1465828280.725:2): apparmor="STATUS"
operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=636
comm="apparmor_parser"
[ 3.766726] audit: type=1400 audit(1465828280.725:3): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/ippusbxd" pid=640
comm="apparmor_parser"
[ 3.767307] audit: type=1400 audit(1465828280.725:4): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/cups-browsed" pid=638
comm="apparmor_parser"
[ 3.767659] audit: type=1400 audit(1465828280.725:5): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=633 comm="apparmor_parser"
[ 3.767662] audit: type=1400 audit(1465828280.725:6): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=633 comm="apparmor_parser"
[ 3.767665] audit: type=1400 audit(1465828280.725:7): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=633
comm="apparmor_parser"
[ 3.767667] audit: type=1400 audit(1465828280.725:8): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=633 comm="apparmor_parser"
[ 3.768029] audit: type=1400 audit(1465828280.729:9): apparmor="STATUS"
operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=632
comm="apparmor_parser"
[ 3.768034] audit: type=1400 audit(1465828280.729:10): apparmor="STATUS"
operation="profile_load" name="chromium" pid=632 comm="apparmor_parser"
[ 3.806176] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 3.806943] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.974443] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.974677] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 3.975031] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.124531] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.124884] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.213109] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.216164] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.230703] r8169 0000:03:00.0 enp3s0: link down
[ 4.230784] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.331816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.538270] fuse init (API version 7.24)
[ 4.738525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.738528] Bluetooth: BNEP filters: protocol multicast
[ 4.738531] Bluetooth: BNEP socket layer initialized
[ 5.667805] Bluetooth: hci0: Reading Intel version information failed (-110)
[ 5.671888] Bluetooth: hci0 command tx timeout
[ 8.917464] wlp2s0: authenticate with 6c:72:20:3f:11:fe
[ 8.926632] wlp2s0: send auth to 6c:72:20:3f:11:fe (try 1/3)
[ 8.931160] wlp2s0: authenticated
[ 8.931973] wlp2s0: associate with 6c:72:20:3f:11:fe (try 1/3)
[ 8.933098] wlp2s0: RX AssocResp from 6c:72:20:3f:11:fe (capab=0x11 status=0
aid=1)
[ 8.934412] wlp2s0: associated
[ 8.934458] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 10.552798] usb 1-11: USB disconnect, device number 5
[ 10.824120] usb 1-11: new full-speed USB device number 6 using xhci_hcd
[ 10.953024] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b
[ 10.953028] usb 1-11: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 10.955686] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 10.960697] Bluetooth: hci0: Device revision is 5
[ 10.960699] Bluetooth: hci0: Secure boot is enabled
[ 10.960700] Bluetooth: hci0: OTP lock is enabled
[ 10.960701] Bluetooth: hci0: API lock is enabled
[ 10.960701] Bluetooth: hci0: Debug lock is disabled
[ 10.960702] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 10.960819] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 12.400967] Bluetooth: hci0: Waiting for firmware download to complete
[ 12.401717] Bluetooth: hci0: Firmware loaded in 1413320 usecs
[ 12.401781] Bluetooth: hci0: Waiting for device to boot
[ 12.413759] Bluetooth: hci0: Device booted in 11728 usecs
[ 12.413904] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[ 12.415750] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 12.416742] Bluetooth: hci0: Setting Intel event mask failed (-16)
[ 12.472082] Bluetooth: RFCOMM TTY layer initialized
[ 12.472088] Bluetooth: RFCOMM socket layer initialized
[ 12.472091] Bluetooth: RFCOMM ver 1.11
[ 32.899110] wlp2s0: disconnect from AP 6c:72:20:3f:11:fe for new auth to
6c:72:20:3f:12:00
[ 32.907696] wlp2s0: authenticate with 6c:72:20:3f:12:00
[ 32.914798] wlp2s0: send auth to 6c:72:20:3f:12:00 (try 1/3)
[ 32.919711] wlp2s0: authenticated
[ 32.921144] wlp2s0: associate with 6c:72:20:3f:12:00 (try 1/3)
[ 32.922268] wlp2s0: RX AssocResp from 6c:72:20:3f:12:00 (capab=0x11 status=0
aid=2)
[ 32.923841] wlp2s0: associated
[ 371.314250] [UFW BLOCK] IN=wlp2s0 OUT=
MAC=01:00:5e:00:00:fb:bc:6c:21:4b:ba:45:08:00 SRC=192.168.0.185 DST=224.0.0.251
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=40966 PROTO=2
[ 378.846899] [UFW BLOCK] IN=wlp2s0 OUT=
MAC=01:00:5e:00:00:fb:bc:6c:21:4b:ba:45:08:00 SRC=192.168.0.185 DST=224.0.0.251
LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15840 PROTO=2
_______________________________________________
Bug-grub mailing list
Bug-grub@gnu.org
https://lists.gnu.org/mailman/listinfo/bug-grub
