Hi,
Thank you for answer about hibernation. Can you help me with similar
issue with sleeping?
I can freeze system and wake it up with "echo freeze > /sys/power/state"
command, but system can't wake up from suspend to mem (that can be
started with closing display, pressing sleep button or with "echo mem >
/sys/power/state" command).
Log after freeze command attached. As far as I can see wakeup must be
possible with "sleep" button:
$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
HDEF S4 *disabled pci:0000:00:1b.0
USB1 S4 *enabled pci:0000:00:1d.0
USB2 S4 *enabled pci:0000:00:1d.1
USB3 S4 *enabled pci:0000:00:1d.2
EHC1 S4 *enabled pci:0000:00:1d.7
USB4 S4 *enabled pci:0000:00:1a.0
USB5 S4 *enabled pci:0000:00:1a.1
USB6 S4 *enabled pci:0000:00:1a.2
EHC2 S4 *enabled pci:0000:00:1a.7
SLT1 S4 *disabled
SLT2 S4 *disabled
SLT3 S4 *disabled
SLT6 S4 *disabled
LANC S3 *disabled
LANR S3 *disabled
SLPB S3 *enabled platform:PNP0C0E:00
LID S3 *enabled platform:PNP0C0D:00
When I power off notebook and restart it after sleep there is nothing
about sleep in logs.
Regards,
Nikolay
Nov 27 03:55:31 localhost vmunix: [ 522.009436] PM: Syncing filesystems ...
done.
Nov 27 03:55:31 localhost vmunix: [ 522.188954] Freezing user space processes
... (elapsed 0.001 seconds) done.
Nov 27 03:55:31 localhost vmunix: [ 522.190236] Double checking all user space
processes after OOM killer disable... (elapsed 0.000 seconds)
Nov 27 03:55:31 localhost vmunix: [ 522.190265] Freezing remaining freezable
tasks ... (elapsed 0.001 seconds) done.
Nov 27 03:55:31 localhost vmunix: [ 522.191469] Suspending console(s) (use
no_console_suspend to debug)
Nov 27 03:55:31 localhost vmunix: [ 522.204461] queueing ieee80211 work while
going to suspend
Nov 27 03:55:31 localhost vmunix: [ 522.208349] sd 0:0:0:0: [sda]
Synchronizing SCSI cache
Nov 27 03:55:31 localhost vmunix: [ 522.208849] e1000e: EEE TX LPI TIMER:
00000000
Nov 27 03:55:31 localhost vmunix: [ 522.264262] sd 0:0:0:0: [sda] Stopping disk
Nov 27 03:55:32 localhost vmunix: [ 522.707325] PM: suspend of devices
complete after 515.559 msecs
Nov 27 03:55:32 localhost vmunix: [ 522.724166] PM: late suspend of devices
complete after 16.836 msecs
Nov 27 03:55:32 localhost vmunix: [ 522.725536] ehci-pci 0000:00:1d.7: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725620] uhci_hcd 0000:00:1d.2: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725636] uhci_hcd 0000:00:1d.1: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725678] uhci_hcd 0000:00:1d.0: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725743] ehci-pci 0000:00:1a.7: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725785] uhci_hcd 0000:00:1a.2: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725836] uhci_hcd 0000:00:1a.1: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.725887] uhci_hcd 0000:00:1a.0: System
wakeup enabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.764036] PM: noirq suspend of devices
complete after 38.890 msecs
Nov 27 03:55:32 localhost vmunix: [ 522.764259] uhci_hcd 0000:00:1a.0: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.764280] uhci_hcd 0000:00:1a.1: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.764311] uhci_hcd 0000:00:1a.2: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.764399] uhci_hcd 0000:00:1d.0: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.764417] uhci_hcd 0000:00:1d.1: System
wakeup disabled by ACPI
Nov 27 03:55:31 localhost wpa_passphrase: Libgcrypt warning: missing
initialization - please fix the application
Nov 27 03:55:32 localhost vmunix: [ 522.764462] uhci_hcd 0000:00:1d.2: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.784095] ehci-pci 0000:00:1a.7: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.784213] ehci-pci 0000:00:1d.7: System
wakeup disabled by ACPI
Nov 27 03:55:32 localhost vmunix: [ 522.804146] PM: noirq resume of devices
complete after 40.020 msecs
Nov 27 03:55:32 localhost vmunix: [ 522.948325] PM: early resume of devices
complete after 0.192 msecs
Nov 27 03:55:32 localhost vmunix: [ 522.951736] usb usb3: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.951781] usb usb4: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.951829] usb usb5: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.951978] usb usb6: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.952022] usb usb7: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.952074] usb usb8: root hub lost power
or was reset
Nov 27 03:55:33 localhost vmunix: [ 522.952302] rtc_cmos 00:03: System wakeup
disabled by ACPI
Nov 27 03:55:33 localhost vmunix: [ 522.953755] sd 0:0:0:0: [sda] Starting disk
Nov 27 03:55:33 localhost vmunix: [ 523.266287] ata1: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Nov 27 03:55:33 localhost vmunix: [ 523.266309] ata2: SATA link down (SStatus
0 SControl 300)
Nov 27 03:55:31 localhost wpa_supplicant: Libgcrypt warning: missing
initialization - please fix the application
Nov 27 03:55:33 localhost vmunix: [ 523.268604] ata1.00: configured for
UDMA/100
Nov 27 03:55:33 localhost vmunix: [ 526.350902] PM: resume of devices complete
after 3402.574 msecs
Nov 27 03:55:33 localhost vmunix: [ 526.354584] Restarting tasks ... done.
Nov 27 03:55:33 localhost vmunix: [ 526.373722] video LNXVIDEO:00: Restoring
backlight state
Nov 27 03:55:33 localhost vmunix: [ 526.568433] wlp2s0: authenticate with
30:b5:c2:3b:1d:0e
Nov 27 03:55:33 localhost vmunix: [ 526.581545] wlp2s0: send auth to
30:b5:c2:3b:1d:0e (try 1/3)
Nov 27 03:55:33 localhost vmunix: [ 526.583736] wlp2s0: authenticated
Nov 27 03:55:33 localhost vmunix: [ 526.588037] wlp2s0: associate with
30:b5:c2:3b:1d:0e (try 1/3)
Nov 27 03:55:33 localhost vmunix: [ 526.596109] wlp2s0: RX AssocResp from
30:b5:c2:3b:1d:0e (capab=0x431 status=0 aid=2)
Nov 27 03:55:33 localhost vmunix: [ 526.596243] wlp2s0: associated
Nov 27 03:55:33 localhost vmunix: [ 526.596270] IPv6: ADDRCONF(NETDEV_CHANGE):
wlp2s0: link becomes ready
Nov 27 03:55:32 localhost dhclient: Internet Systems Consortium DHCP Client
4.3.5
Nov 27 03:55:33 localhost vmunix: [ 527.750063] psmouse serio1: trackpoint:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Nov 27 03:55:33 localhost vmunix: [ 527.769206] input: TPPS/2 IBM TrackPoint
as /devices/platform/i8042/serio1/input/input24
[email protected] (Ludovic Courtès) writes:
> Hello,
>
> Nikolay Merinov <[email protected]> skribis:
>
>> I use GuixSD on libreboot x200. Issue was checked with linux-libre kernels
>> 4.1,
>> 4.8, 4.10; with libreboot 2015-01-26, 2015-05-18, 2016-09-07; with and
>> without "resume=/dev/sda2" option (my swap partition on /dev/sda2).
>>
>> I can't resume neither from suspend to ram nor from suspend to disk.
>>
>> I start hibernation with "echo disk > /sys/power/state" command. On
>> next boot image does not restored. I can see that image was saved:
>>
>> # swapon /dev/sda2
>> swapon: /dev/sda2: software suspend data detected. Rewriting the swap
>> signature.
>
> Hibernation is not supported yet in GuixSD, unless you applied this
> patch:
>
> https://lists.gnu.org/archive/html/guix-devel/2016-08/msg00962.html
>
> If you want to try it out, feedback is welcome! Note that Mark did
> mention that it’s risky, but that it worked in their tests.
>
> Thanks,
> Ludo’.
