On Wed, May 22, 2019 at 11:10:00AM +0000, Francisco Gómez wrote: > When I have inserted a device recorded with a GuixSD image in my Late 2009 > iMac (EFI, not UEFI) during boot, the computer gets stuck in a loop and > doesn't respond. I believe this is due to a lack of, or duplication, of > UUIDs (not to be confused with PARTUUIDs) on some partitions, as manually > assigning them allows my computer to properly detect the attached devices > and boot from the GuixSD one (although not successfully). > > > udisksctl loop-setup -rf guix-system-install-1.0.1.x86_64-linux.iso > Mapped file guix-system-install-1.0.1.x86_64-linux.iso as /dev/loop0. > > > sudo blkid -o list | grep ^/dev/loop0 | cut -d" " -f1 | sort > /dev/loop0 > /dev/loop0p1 > /dev/loop0p2 > /dev/loop0p3 > /dev/loop0p4 > > > sudo blkid -s UUID | grep ^/dev/loop0 > /dev/loop0: UUID="1970-01-01-19-49-46-83" > /dev/loop0p2: UUID="C920-B8AE" > > > > > >
I believe this is <https://issues.guix.info/issue/35428>. Unfortunately Danny pushed his patch after the 1.0.1 release got branched off. Can you try an ISO built from current Guix git master? Regards, Florian
