https://github.com/QubesOS/qubes-issues/issues/5492
Mostly they created qubes without thinking into having this feature.
Julien Lepiller:
Alt+arrow might work, unless you're already on a tty on qubes? Depending on the
VM techno qubes uses, there might also be a way to switch tty within the VM by
ussing some control sequence.
Le 22 décembre 2020 20:18:57 GMT-05:00, bo0od <bo...@riseup.net> a écrit :
You cant switch to another tty in VM of qubes because trying it will
switch you to tty of the Qubes itself not the VM within Qubes.
Julien Lepiller:
Before starting the installation, you should be able to switch to
another tty and configure network from there. Then continue
installation from tty1. Does it solve your issues?
Le 21 décembre 2020 21:56:03 GMT-05:00, bo0od <bo...@riseup.net> a
écrit :
No, after adding hostname it check for connectivity and after that
it
shows red screen with message "The selected network does not provide
access to the internet, please try again." and you cant pass that
message/connectivity check.
zimoun:
Hi,
Sorry for the long delay.
On Sun, 11 Aug 2019 at 06:31, bo0od <bo...@riseup.net> wrote:
Im trying to install Guix over Qubes and to do so it needs
manually
adding of IP,DNS,Gateway (because its installed over xen
virtualization)
But im always facing the issue of not connection failed and reback
to
the older step and then again and again with no success to bypass
this
step.
I think this is fixed in the installer at least v1.2. Could you
confirm?
All the best,
simon
