Hi, For a friend (Andreas, cc'd), this fails:
$ qemu-system-x86_64 -drive "file=/tmp/hurd.ext2,format=raw" \
-accel kvm -m 8G -serial mon:stdio
while this works (just adding '-M q35'):
$ qemu-system-x86_64 -drive "file=/tmp/hurd.ext2,format=raw" \
-accel kvm -m 8G -M q35 -serial mon:stdio
Versions:
* gnumach: snapshot from debian's repo [0] (debian/2%1.8+git20260224-4,
but no patches applied from there)
* hurd: snapshot from debian's repo [1] (debian/1%0.9.git20251029-7,
but no patches applied from there)
* qemu: 10.2.0
[0]
https://salsa.debian.org/hurd-team/gnumach/-/tree/23f9089de7f27aaac94d35212bbb39b4b1772eba
[1]
https://salsa.debian.org/hurd-team/hurd/-/tree/b57889c52cc0496a4ecb3ef74a9e30ca0fc22359
I've attached serial console output for both boots.
0
ACPI:
rsdp = 0xbffe2335
rsdt/xsdt = 0xffffffffeea40335 (n = 4)
8 bit APIC ids
APIC entry=0xffffffffeea42289 end=0xffffffffeea422d5
APIC entry=0xffffffffeea42289 end=0xffffffffeea422d5
APIC entry=0xffffffffeea42291 end=0xffffffffeea422d5
APIC entry=0xffffffffeea4229d end=0xffffffffeea422d5
APIC entry=0xffffffffeea422a7 end=0xffffffffeea422d5
APIC entry=0xffffffffeea422b1 end=0xffffffffeea422d5
APIC entry=0xffffffffeea422bb end=0xffffffffeea422d5
APIC entry=0xffffffffeea422c5 end=0xffffffffeea422d5
APIC entry=0xffffffffeea422cf end=0xffffffffeea422d5
Unhandled APIC entry type 0x4
CPUS:
CPU 0 - APIC ID 0 - addr=0xffffffffeea46000
IOAPICS:
IOAPIC 0 - APIC ID 0 - addr=0xffffffffeea47000
IOAPIC version 0x11
IRQ override: pin=0 gsi=2 trigger=EDGE polarity=HIGH
IRQ override: pin=5 gsi=5 trigger=LEVEL polarity=HIGH
IRQ override: pin=9 gsi=9 trigger=LEVEL polarity=HIGH
IRQ override: pin=10 gsi=10 trigger=LEVEL polarity=HIGH
IRQ override: pin=11 gsi=11 trigger=LEVEL polarity=HIGH
IOAPIC 0 configured with GSI 0-23
com 2 out of range
RTC time is 2026-03-26 21:59:09
HPET ticks every 10 nanoseconds
HPET enabled
timer calibration... done
module 0: pci-arbiter --host-priv-port=${host-port}
--device-master-port=${device-port} --next-task=${acpi-task}
$(pci-task=task-create) $(task-resume)
module 1: acpi --next-task=${disk-task} $(acpi-task=task-create)
module 2: rumpdisk --next-task=${fs-task} $(disk-task=task-create)
module 3: ext2fs --multiboot-command-line=${kernel-command-line}
--exec-server-task=${exec-task} -T typed ${root} $(fs-task=task-create)
module 4: exec /hurd/exec $(exec-task=task-create)
5 multiboot modules
task loaded: pci-arbiter --host-priv-port=1 --device-master-port=2 --next-task=3
task loaded: acpi --next-task=1
task loaded: rumpdisk --next-task=1
task loaded: ext2fs --multiboot-command-line=root=part:1:device:wd0 noide
console=com0 --exec-server-task=1 -T typed part:1:device:wd0
task loaded: exec /hurd/exec
start pci-arbiter: pci acpi ACPI: RSDP 0x00000000000F52E0 000014 (v00 BOCHS )
ACPI: RSDT 0x00000000BFFE2335 000034 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: FACP 0x00000000BFFE21E9 000074 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: DSDT 0x00000000BFFE0040 0021A9 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: FACS 0x00000000BFFE0000 000040
ACPI: APIC 0x00000000BFFE225D 000078 (v03 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: HPET 0x00000000BFFE22D5 000038 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: WAET 0x00000000BFFE230D 000028 (v01 BOCHS BXPC 00000001 BXPC
00000001)
irqhelp: cannot grab acpi device, continuing
Module-level evaluation : (Definition Block level)
Module-level complete : (Definition Block level)
ACPI table initialization:
Table [DSDT: BXPC ] (id 01) - 341 Objects with 53 Devices, 7 Regions,
102 Methods (43/59/4 Serial/Non/Cvt)
ACPI: 1 ACPI AML tables successfully acquired and loaded
Final data object initialization: Namespace contains 350 (0x15E) objects
Enter evaluation : _SB.PCI0._HID (Integer)
Exit evaluation : _SB.PCI0._HID
Enter evaluation : _SB.PCI0._UID (Integer)
Exit evaluation : _SB.PCI0._UID
Enter evaluation : _SB.PCI0.PRES._HID (Integer)
Exit evaluation : _SB.PCI0.PRES._HID
Enter evaluation : _SB.PCI0.PRES._UID (String)
Exit evaluation : _SB.PCI0.PRES._UID
Enter evaluation : _SB.PCI0.GPE0._HID (String)
Exit evaluation : _SB.PCI0.GPE0._HID
Enter evaluation : _SB.PCI0.GPE0._UID (String)
Exit evaluation : _SB.PCI0.GPE0._UID
Enter evaluation : _SB.PCI0.PHPR._HID (String)
Exit evaluation : _SB.PCI0.PHPR._HID
Enter evaluation : _SB.PCI0.PHPR._UID (String)
Exit evaluation : _SB.PCI0.PHPR._UID
Enter evaluation : _SB.PCI0.FWCF._HID (String)
Exit evaluation : _SB.PCI0.FWCF._HID
Enter evaluation : _SB.PCI0.S00._ADR (Integer)
Exit evaluation : _SB.PCI0.S00._ADR
Enter evaluation : _SB.PCI0.S08._ADR (Integer)
Exit evaluation : _SB.PCI0.S08._ADR
Enter evaluation : _SB.PCI0.S08.KBD._HID (Integer)
Exit evaluation : _SB.PCI0.S08.KBD._HID
Enter evaluation : _SB.PCI0.S08.MOU._HID (Integer)
Exit evaluation : _SB.PCI0.S08.MOU._HID
Enter evaluation : _SB.PCI0.S08.FDC0._HID (Integer)
Exit evaluation : _SB.PCI0.S08.FDC0._HID
Enter evaluation : _SB.PCI0.S08.FDC0.FLPA._ADR (Integer)
Exit evaluation : _SB.PCI0.S08.FDC0.FLPA._ADR
Enter evaluation : _SB.PCI0.S08.LPT1._HID (Integer)
Exit evaluation : _SB.PCI0.S08.LPT1._HID
Enter evaluation : _SB.PCI0.S08.LPT1._UID (Integer)
Exit evaluation : _SB.PCI0.S08.LPT1._UID
Enter evaluation : _SB.PCI0.S08.COM1._HID (Integer)
Exit evaluation : _SB.PCI0.S08.COM1._HID
Enter evaluation : _SB.PCI0.S08.COM1._UID (Integer)
Exit evaluation : _SB.PCI0.S08.COM1._UID
Enter evaluation : _SB.PCI0.S08.RTC._HID (Integer)
Exit evaluation : _SB.PCI0.S08.RTC._HID
Enter evaluation : _SB.PCI0.S09._ADR (Integer)
Exit evaluation : _SB.PCI0.S09._ADR
Enter evaluation : _SB.PCI0.S0B._ADR (Integer)
Exit evaluation : _SB.PCI0.S0B._ADR
Enter evaluation : _SB.PCI0.S10._ADR (Integer)
Exit evaluation : _SB.PCI0.S10._ADR
Enter evaluation : _SB.PCI0.S10._S1D (Method)
Exit evaluation : _SB.PCI0.S10._S1D
Enter evaluation : _SB.PCI0.S10._S2D (Method)
Exit evaluation : _SB.PCI0.S10._S2D
Enter evaluation : _SB.PCI0.S10._S3D (Method)
Exit evaluation : _SB.PCI0.S10._S3D
Enter evaluation : _SB.PCI0.S18._ADR (Integer)
Exit evaluation : _SB.PCI0.S18._ADR
Enter evaluation : _SB.PCI0.S20._ADR (Integer)
Exit evaluation : _SB.PCI0.S20._ADR
Can't find pci dev 0000:0:04.0
Enter evaluation : _SB.PCI0.S28._ADR (Integer)
Exit evaluation : _SB.PCI0.S28._ADR
Can't find pci dev 0000:0:05.0
Enter evaluation : _SB.PCI0.S30._ADR (Integer)
Exit evaluation : _SB.PCI0.S30._ADR
Can't find pci dev 0000:0:06.0
Enter evaluation : _SB.PCI0.S38._ADR (Integer)
Exit evaluation : _SB.PCI0.S38._ADR
Can't find pci dev 0000:0:07.0
Enter evaluation : _SB.PCI0.S40._ADR (Integer)
Exit evaluation : _SB.PCI0.S40._ADR
Can't find pci dev 0000:0:08.0
Enter evaluation : _SB.PCI0.S48._ADR (Integer)
Exit evaluation : _SB.PCI0.S48._ADR
Can't find pci dev 0000:0:09.0
Enter evaluation : _SB.PCI0.S50._ADR (Integer)
Exit evaluation : _SB.PCI0.S50._ADR
Can't find pci dev 0000:0:0a.0
Enter evaluation : _SB.PCI0.S58._ADR (Integer)
Exit evaluation : _SB.PCI0.S58._ADR
Can't find pci dev 0000:0:0b.0
Enter evaluation : _SB.PCI0.S60._ADR (Integer)
Exit evaluation : _SB.PCI0.S60._ADR
Can't find pci dev 0000:0:0c.0
Enter evaluation : _SB.PCI0.S68._ADR (Integer)
Exit evaluation : _SB.PCI0.S68._ADR
Can't find pci dev 0000:0:0d.0
Enter evaluation : _SB.PCI0.S70._ADR (Integer)
Exit evaluation : _SB.PCI0.S70._ADR
Can't find pci dev 0000:0:0e.0
Enter evaluation : _SB.PCI0.S78._ADR (Integer)
Exit evaluation : _SB.PCI0.S78._ADR
Can't find pci dev 0000:0:0f.0
Enter evaluation : _SB.PCI0.S80._ADR (Integer)
Exit evaluation : _SB.PCI0.S80._ADR
Can't find pci dev 0000:0:10.0
Enter evaluation : _SB.PCI0.S88._ADR (Integer)
Exit evaluation : _SB.PCI0.S88._ADR
Can't find pci dev 0000:0:11.0
Enter evaluation : _SB.PCI0.S90._ADR (Integer)
Exit evaluation : _SB.PCI0.S90._ADR
Can't find pci dev 0000:0:12.0
Enter evaluation : _SB.PCI0.S98._ADR (Integer)
Exit evaluation : _SB.PCI0.S98._ADR
Can't find pci dev 0000:0:13.0
Enter evaluation : _SB.PCI0.SA0._ADR (Integer)
Exit evaluation : _SB.PCI0.SA0._ADR
Can't find pci dev 0000:0:14.0
Enter evaluation : _SB.PCI0.SA8._ADR (Integer)
Exit evaluation : _SB.PCI0.SA8._ADR
Can't find pci dev 0000:0:15.0
Enter evaluation : _SB.PCI0.SB0._ADR (Integer)
Exit evaluation : _SB.PCI0.SB0._ADR
Can't find pci dev 0000:0:16.0
Enter evaluation : _SB.PCI0.SB8._ADR (Integer)
Exit evaluation : _SB.PCI0.SB8._ADR
Can't find pci dev 0000:0:17.0
Enter evaluation : _SB.PCI0.SC0._ADR (Integer)
Exit evaluation : _SB.PCI0.SC0._ADR
Can't find pci dev 0000:0:18.0
Enter evaluation : _SB.PCI0.SC8._ADR (Integer)
Exit evaluation : _SB.PCI0.SC8._ADR
Can't find pci dev 0000:0:19.0
Enter evaluation : _SB.PCI0.SD0._ADR (Integer)
Exit evaluation : _SB.PCI0.SD0._ADR
Can't find pci dev 0000:0:1a.0
Enter evaluation : _SB.PCI0.SD8._ADR (Integer)
Exit evaluation : _SB.PCI0.SD8._ADR
Can't find pci dev 0000:0:1b.0
Enter evaluation : _SB.PCI0.SE0._ADR (Integer)
Exit evaluation : _SB.PCI0.SE0._ADR
Can't find pci dev 0000:0:1c.0
Enter evaluation : _SB.PCI0.SE8._ADR (Integer)
Exit evaluation : _SB.PCI0.SE8._ADR
Can't find pci dev 0000:0:1d.0
Enter evaluation : _SB.PCI0.SF0._ADR (Integer)
Exit evaluation : _SB.PCI0.SF0._ADR
Can't find pci dev 0000:0:1e.0
Enter evaluation : _SB.PCI0.SF8._ADR (Integer)
Exit evaluation : _SB.PCI0.SF8._ADR
Can't find pci dev 0000:0:1f.0
Enter evaluation : _SB.LNKA._HID (Integer)
Exit evaluation : _SB.LNKA._HID
Enter evaluation : _SB.LNKA._UID (Integer)
Exit evaluation : _SB.LNKA._UID
Enter evaluation : _SB.LNKB._HID (Integer)
Exit evaluation : _SB.LNKB._HID
Enter evaluation : _SB.LNKB._UID (Integer)
Exit evaluation : _SB.LNKB._UID
Enter evaluation : _SB.LNKC._HID (Integer)
Exit evaluation : _SB.LNKC._HID
Enter evaluation : _SB.LNKC._UID (Integer)
Exit evaluation : _SB.LNKC._UID
Enter evaluation : _SB.LNKD._HID (Integer)
Exit evaluation : _SB.LNKD._HID
Enter evaluation : _SB.LNKD._UID (Integer)
Exit evaluation : _SB.LNKD._UID
Enter evaluation : _SB.LNKS._HID (Integer)
Exit evaluation : _SB.LNKS._HID
Enter evaluation : _SB.LNKS._UID (Integer)
Exit evaluation : _SB.LNKS._UID
Enter evaluation : _SB.HPET._HID (Integer)
Exit evaluation : _SB.HPET._HID
Enter evaluation : _SB.HPET._UID (Integer)
Exit evaluation : _SB.HPET._UID
Enter evaluation : _SB.CPUS._HID (String)
Exit evaluation : _SB.CPUS._HID
Enter evaluation : _SB.CPUS._CID (Integer)
Exit evaluation : _SB.CPUS._CID
Failed to set ACPI PIC mode: Input/output error
evxfevnt-0063 enable : Transition to ACPI mode successful
Initializing General Purpose Events (GPEs):
Initialized GPE 00 to 0F [_GPE] 2 regs on interrupt 0x9 (SCI)
irq handler [9]: new delivery port ffffffffdf946ac8 entry ffffffffdc007d00 for
acpi
Initializing Device/Processor/Thermal objects and executing _INI/_STA methods:
Enter evaluation : _SB.PCI0.PRES._INI (Method)
Exit evaluation : _SB.PCI0.PRES._INI
Executed 1 _INI methods requiring 0 _STA executions (examined 56 objects)
PASS!
rumpdisk random init open failed
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights
reserved.
[ 1.0000000] NetBSD 10.99.12 (RUMP-ROAST)
[ 1.0000000] total memory = unlimited (host limit)
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000040] timecounter: Timecounter "clockinterrupt" frequency 100 Hz
quality 0
[ 1.0000050] cpu0 at thinair0: rump virtual cpu
[ 1.0000050] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000050] root file system type: rumpfs
[ 1.0000050] kern.module.path=/stand/amd64/10.99.12/modules
[ 1.0000050] mainbus0 (root)
[ 1.0000050] pci0 at mainbus0 bus 0
[ 1.0000050] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv
ok
[ 1.0000050] vendor 8086 product 1237 (host bridge, revision 0x02) at pci0
dev 0 function 0 not configured
[ 1.0000050] vendor 8086 product 7000 (ISA bridge) at pci0 dev 1 function 0
not configured
[ 1.0000050] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface
(PIIX3) (rev. 0x00)
[ 1.0000050] piixide0: bus-master DMA support present
[ 1.0000050] piixide0: primary channel wired to compatibility mode
irqhelp: tried acpi to get pci gsi and failed for 00:01.1
irq handler [14]: new delivery port ffffffffdf7507c0 entry ffffffffdc007cc0 for
rumpdisk
[ 1.0200050] atabus0 at piixide0 channel 0
[ 1.0200050] piixide0: secondary channel wired to compatibility mode
irqhelp: tried acpi to get pci gsi and failed for 00:01.1
irq handler [15]: new delivery port ffffffffdf7501e8 entry ffffffffdc007d80 for
rumpdisk
[ 1.0200050] wd0 at atabus0 drive 0
[ 4.1500050] atabus1 at piixide0 channel 1
[ 4.1500050] vendor 8086 product 7113 (miscellaneous bridge, revision 0x03)
at pci0 dev 1 function 3 not configured
[ 4.1500050] vendor 1234 product 1111 (VGA display, revision 0x02) at pci0
dev 2 function 0 not configured
[ 4.1500050] vendor 8086 product 100e (ethernet network, revision 0x03) at
pci0 dev 3 function 0 not configured
[ 4.2700050] wd0: <QEMU HARDDISK>
[ 4.2700050] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 4.2700050] wd0: 8192 MB, 16644 cyl, 16 head, 63 sec, 512 bytes/sect x
16777216 sectors
[ 7.3400050] wd0: 32-bit data port
[ 7.3400050] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
warning: dmalloc(4096) requested with 10000 alignment, bumping up size
[ 7.3400050] wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
[ 7.3600050] atapibus0 at atabus1: 2 targets
[ 7.3900050] cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom
removable
[ 7.3900050] cd0: 32-bit data port
[ 7.4100050] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100)
warning: dmalloc(4096) requested with 10000 alignment, bumping up size
[ 7.4100050] cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
ext2fs: part:1:device:wd0: Input/output error
0
ACPI:
rsdp = 0x7ffe2351
rsdt/xsdt = 0xffffffffeea40351 (n = 5)
8 bit APIC ids
APIC entry=0xffffffffeea42269 end=0xffffffffeea422b5
APIC entry=0xffffffffeea42269 end=0xffffffffeea422b5
APIC entry=0xffffffffeea42271 end=0xffffffffeea422b5
APIC entry=0xffffffffeea4227d end=0xffffffffeea422b5
APIC entry=0xffffffffeea42287 end=0xffffffffeea422b5
APIC entry=0xffffffffeea42291 end=0xffffffffeea422b5
APIC entry=0xffffffffeea4229b end=0xffffffffeea422b5
APIC entry=0xffffffffeea422a5 end=0xffffffffeea422b5
APIC entry=0xffffffffeea422af end=0xffffffffeea422b5
Unhandled APIC entry type 0x4
CPUS:
CPU 0 - APIC ID 0 - addr=0xffffffffeea47000
IOAPICS:
IOAPIC 0 - APIC ID 0 - addr=0xffffffffeea48000
IOAPIC version 0x11
IRQ override: pin=0 gsi=2 trigger=EDGE polarity=HIGH
IRQ override: pin=5 gsi=5 trigger=LEVEL polarity=HIGH
IRQ override: pin=9 gsi=9 trigger=LEVEL polarity=HIGH
IRQ override: pin=10 gsi=10 trigger=LEVEL polarity=HIGH
IRQ override: pin=11 gsi=11 trigger=LEVEL polarity=HIGH
IOAPIC 0 configured with GSI 0-23
com 2 out of range
RTC time is 2026-03-26 22:00:40
HPET ticks every 10 nanoseconds
HPET enabled
timer calibration... done
module 0: pci-arbiter --host-priv-port=${host-port}
--device-master-port=${device-port} --next-task=${acpi-task}
$(pci-task=task-create) $(task-resume)
module 1: acpi --next-task=${disk-task} $(acpi-task=task-create)
module 2: rumpdisk --next-task=${fs-task} $(disk-task=task-create)
module 3: ext2fs --multiboot-command-line=${kernel-command-line}
--exec-server-task=${exec-task} -T typed ${root} $(fs-task=task-create)
module 4: exec /hurd/exec $(exec-task=task-create)
5 multiboot modules
task loaded: pci-arbiter --host-priv-port=1 --device-master-port=2 --next-task=3
task loaded: acpi --next-task=1
task loaded: rumpdisk --next-task=1
task loaded: ext2fs --multiboot-command-line=root=part:1:device:wd0 noide
console=com0 --exec-server-task=1 -T typed part:1:device:wd0
task loaded: exec /hurd/exec
start pci-arbiter: pci acpi ACPI: RSDP 0x00000000000F52F0 000014 (v00 BOCHS )
ACPI: RSDT 0x000000007FFE2351 000038 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: FACP 0x000000007FFE2149 0000F4 (v03 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: DSDT 0x000000007FFE0040 002109 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: FACS 0x000000007FFE0000 000040
ACPI: APIC 0x000000007FFE223D 000078 (v03 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: HPET 0x000000007FFE22B5 000038 (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: MCFG 0x000000007FFE22ED 00003C (v01 BOCHS BXPC 00000001 BXPC
00000001)
ACPI: WAET 0x000000007FFE2329 000028 (v01 BOCHS BXPC 00000001 BXPC
00000001)
irqhelp: cannot grab acpi device, continuing
Module-level evaluation : (Definition Block level)
Module-level complete : (Definition Block level)
ACPI table initialization:
Table [DSDT: BXPC ] (id 01) - 252 Objects with 35 Devices, 7 Regions,
72 Methods (19/53/9 Serial/Non/Cvt)
ACPI: 1 ACPI AML tables successfully acquired and loaded
Final data object initialization: Namespace contains 261 (0x105) objects
Enter evaluation : _SB.PCI0._HID (Integer)
Exit evaluation : _SB.PCI0._HID
Enter evaluation : _SB.PCI0._UID (Integer)
Exit evaluation : _SB.PCI0._UID
Enter evaluation : _SB.PCI0._CID (Integer)
Exit evaluation : _SB.PCI0._CID
Enter evaluation : _SB.PCI0.PRES._HID (Integer)
Exit evaluation : _SB.PCI0.PRES._HID
Enter evaluation : _SB.PCI0.PRES._UID (String)
Exit evaluation : _SB.PCI0.PRES._UID
Enter evaluation : _SB.PCI0.GPE0._HID (String)
Exit evaluation : _SB.PCI0.GPE0._HID
Enter evaluation : _SB.PCI0.GPE0._UID (String)
Exit evaluation : _SB.PCI0.GPE0._UID
Enter evaluation : _SB.PCI0.PHPR._HID (String)
Exit evaluation : _SB.PCI0.PHPR._HID
Enter evaluation : _SB.PCI0.PHPR._UID (String)
Exit evaluation : _SB.PCI0.PHPR._UID
Enter evaluation : _SB.PCI0.FWCF._HID (String)
Exit evaluation : _SB.PCI0.FWCF._HID
Enter evaluation : _SB.PCI0.S00._ADR (Integer)
Exit evaluation : _SB.PCI0.S00._ADR
Enter evaluation : _SB.PCI0.S08._ADR (Integer)
Exit evaluation : _SB.PCI0.S08._ADR
Enter evaluation : _SB.PCI0.S08._S1D (Method)
Exit evaluation : _SB.PCI0.S08._S1D
Enter evaluation : _SB.PCI0.S08._S2D (Method)
Exit evaluation : _SB.PCI0.S08._S2D
Enter evaluation : _SB.PCI0.S08._S3D (Method)
Exit evaluation : _SB.PCI0.S08._S3D
Enter evaluation : _SB.PCI0.S10._ADR (Integer)
Exit evaluation : _SB.PCI0.S10._ADR
Enter evaluation : _SB.PCI0.SF8._ADR (Integer)
Exit evaluation : _SB.PCI0.SF8._ADR
Enter evaluation : _SB.PCI0.SF8.KBD._HID (Integer)
Exit evaluation : _SB.PCI0.SF8.KBD._HID
Enter evaluation : _SB.PCI0.SF8.MOU._HID (Integer)
Exit evaluation : _SB.PCI0.SF8.MOU._HID
Enter evaluation : _SB.PCI0.SF8.LPT1._HID (Integer)
Exit evaluation : _SB.PCI0.SF8.LPT1._HID
Enter evaluation : _SB.PCI0.SF8.LPT1._UID (Integer)
Exit evaluation : _SB.PCI0.SF8.LPT1._UID
Enter evaluation : _SB.PCI0.SF8.COM1._HID (Integer)
Exit evaluation : _SB.PCI0.SF8.COM1._HID
Enter evaluation : _SB.PCI0.SF8.COM1._UID (Integer)
Exit evaluation : _SB.PCI0.SF8.COM1._UID
Enter evaluation : _SB.PCI0.SF8.RTC._HID (Integer)
Exit evaluation : _SB.PCI0.SF8.RTC._HID
Enter evaluation : _SB.PCI0.SFA._ADR (Integer)
Exit evaluation : _SB.PCI0.SFA._ADR
Enter evaluation : _SB.PCI0.SFB._ADR (Integer)
Exit evaluation : _SB.PCI0.SFB._ADR
Enter evaluation : _SB.DRAC._HID (String)
Exit evaluation : _SB.DRAC._HID
Enter evaluation : _SB.LNKA._HID (Integer)
Exit evaluation : _SB.LNKA._HID
Enter evaluation : _SB.LNKA._UID (Integer)
Exit evaluation : _SB.LNKA._UID
Enter evaluation : _SB.LNKB._HID (Integer)
Exit evaluation : _SB.LNKB._HID
Enter evaluation : _SB.LNKB._UID (Integer)
Exit evaluation : _SB.LNKB._UID
Enter evaluation : _SB.LNKC._HID (Integer)
Exit evaluation : _SB.LNKC._HID
Enter evaluation : _SB.LNKC._UID (Integer)
Exit evaluation : _SB.LNKC._UID
Enter evaluation : _SB.LNKD._HID (Integer)
Exit evaluation : _SB.LNKD._HID
Enter evaluation : _SB.LNKD._UID (Integer)
Exit evaluation : _SB.LNKD._UID
Enter evaluation : _SB.LNKE._HID (Integer)
Exit evaluation : _SB.LNKE._HID
Enter evaluation : _SB.LNKE._UID (Integer)
Exit evaluation : _SB.LNKE._UID
Enter evaluation : _SB.LNKF._HID (Integer)
Exit evaluation : _SB.LNKF._HID
Enter evaluation : _SB.LNKF._UID (Integer)
Exit evaluation : _SB.LNKF._UID
Enter evaluation : _SB.LNKG._HID (Integer)
Exit evaluation : _SB.LNKG._HID
Enter evaluation : _SB.LNKG._UID (Integer)
Exit evaluation : _SB.LNKG._UID
Enter evaluation : _SB.LNKH._HID (Integer)
Exit evaluation : _SB.LNKH._HID
Enter evaluation : _SB.LNKH._UID (Integer)
Exit evaluation : _SB.LNKH._UID
Enter evaluation : _SB.GSIA._HID (Integer)
Exit evaluation : _SB.GSIA._HID
Enter evaluation : _SB.GSIA._UID (Integer)
Exit evaluation : _SB.GSIA._UID
Enter evaluation : _SB.GSIB._HID (Integer)
Exit evaluation : _SB.GSIB._HID
Enter evaluation : _SB.GSIB._UID (Integer)
Exit evaluation : _SB.GSIB._UID
Enter evaluation : _SB.GSIC._HID (Integer)
Exit evaluation : _SB.GSIC._HID
Enter evaluation : _SB.GSIC._UID (Integer)
Exit evaluation : _SB.GSIC._UID
Enter evaluation : _SB.GSID._HID (Integer)
Exit evaluation : _SB.GSID._HID
Enter evaluation : _SB.GSID._UID (Integer)
Exit evaluation : _SB.GSID._UID
Enter evaluation : _SB.GSIE._HID (Integer)
Exit evaluation : _SB.GSIE._HID
Enter evaluation : _SB.GSIE._UID (Integer)
Exit evaluation : _SB.GSIE._UID
Enter evaluation : _SB.GSIF._HID (Integer)
Exit evaluation : _SB.GSIF._HID
Enter evaluation : _SB.GSIF._UID (Integer)
Exit evaluation : _SB.GSIF._UID
Enter evaluation : _SB.GSIG._HID (Integer)
Exit evaluation : _SB.GSIG._HID
Enter evaluation : _SB.GSIG._UID (Integer)
Exit evaluation : _SB.GSIG._UID
Enter evaluation : _SB.GSIH._HID (Integer)
Exit evaluation : _SB.GSIH._HID
Enter evaluation : _SB.GSIH._UID (Integer)
Exit evaluation : _SB.GSIH._UID
Enter evaluation : _SB.HPET._HID (Integer)
Exit evaluation : _SB.HPET._HID
Enter evaluation : _SB.HPET._UID (Integer)
Exit evaluation : _SB.HPET._UID
Enter evaluation : _SB.CPUS._HID (String)
Exit evaluation : _SB.CPUS._HID
Enter evaluation : _SB.CPUS._CID (Integer)
Exit evaluation : _SB.CPUS._CID
Enter evaluation : _PIC (Method)
Exit evaluation : _PIC
evxfevnt-0063 enable : Transition to ACPI mode successful
Initializing General Purpose Events (GPEs):
Initialized GPE 00 to 3F [_GPE] 8 regs on interrupt 0x9 (SCI)
irq handler [9]: new delivery port ffffffffdf946798 entry ffffffffdc007d00 for
acpi
Initializing Device/Processor/Thermal objects and executing _INI/_STA methods:
Enter evaluation : _SB.PCI0.PRES._INI (Method)
Exit evaluation : _SB.PCI0.PRES._INI
Executed 1 _INI methods requiring 0 _STA executions (examined 38 objects)
PASS!
rumpdisk random init open failed
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights
reserved.
[ 1.0000000] NetBSD 10.99.12 (RUMP-ROAST)
[ 1.0000000] total memory = unlimited (host limit)
[ 1.0000000] timecounter: Timecounters tick every 10.000 msec
[ 1.0000040] timecounter: Timecounter "clockinterrupt" frequency 100 Hz
quality 0
[ 1.0000050] cpu0 at thinair0: rump virtual cpu
[ 1.0000050] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000050] root file system type: rumpfs
[ 1.0000050] kern.module.path=/stand/amd64/10.99.12/modules
[ 1.0000050] mainbus0 (root)
[ 1.0000050] pci0 at mainbus0 bus 0
[ 1.0000050] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv
ok
[ 1.0000050] vendor 8086 product 29c0 (host bridge) at pci0 dev 0 function 0
not configured
[ 1.0000050] vendor 1234 product 1111 (VGA display, revision 0x02) at pci0
dev 1 function 0 not configured
[ 1.0000050] vendor 8086 product 10d3 (ethernet network) at pci0 dev 2
function 0 not configured
[ 1.0000050] vendor 8086 product 2918 (ISA bridge, revision 0x02) at pci0 dev
31 function 0 not configured
[ 1.0000050] ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2922
(rev. 0x02)
[ 1.0000050] ahcisata0: 64-bit DMA
[ 1.0000050] ahcisata0: AHCI revision 1.0, 6 ports, 32 slots, CAP
0xc0141f05<SAM,ISS=0x1=Gen1,SNCQ,S64A>
Enter evaluation : _SB.PCI0._PRT (Method)
Exit evaluation : _SB.PCI0._PRT
Enter evaluation : _SB.PCI0._PRT (Method)
Exit evaluation : _SB.PCI0._PRT
Enter evaluation : _SB.GSIA._CRS (Buffer)
Exit evaluation : _SB.GSIA._CRS
Enter evaluation : _SB.GSIA._PRS (Buffer)
Exit evaluation : _SB.GSIA._PRS
Enter evaluation : _SB.GSIA._PRS (Buffer)
Exit evaluation : _SB.GSIA._PRS
Enter evaluation : _SB.GSIA._CRS (Buffer)
Exit evaluation : _SB.GSIA._CRS
Found IRQ resource 16
Enter evaluation : _SB.GSIA._CRS (Buffer)
Exit evaluation : _SB.GSIA._CRS
Enter evaluation : _SB.GSIA._SRS (Method)
Exit evaluation : _SB.GSIA._SRS
Final irq 16
irq handler [16]: new delivery port ffffffffdfc87ee0 entry ffffffffdc007cc0 for
rumpdisk
[ 1.0400050] ahcisata0: interrupting at pausebreak
[ 1.0400050] atabus0 at ahcisata0 channel 0
[ 1.0400050] atabus1 at ahcisata0 channel 1
[ 1.0400050] atabus2 at ahcisata0 channel 2
[ 1.0400050] atabus3 at ahcisata0 channel 3
[ 1.0400050] atabus4 at ahcisata0 channel 4
[ 1.0400050] atabus5 at ahcisata0 channel 5
[ 1.0400050] vendor 8086 product 2930 (SMBus serial bus, revision 0x02) at
pci0 dev 31 function 3 not configured
[ 1.3500050] ahcisata0 port 2: device present, speed: 1.5Gb/s
[ 1.3500050] ahcisata0 port 0: device present, speed: 1.5Gb/s
[ 1.4000050] wd0 at atabus0 drive 0
[ 1.4000050] wd0: <QEMU HARDDISK>
[ 1.4000050] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 1.4000050] wd0: 8192 MB, 16644 cyl, 16 head, 63 sec, 512 bytes/sect x
16777216 sectors
[ 1.4000050] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100), NCQ (32 tags)
[ 1.4200050] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 3.3600050] atapibus0 at atabus2: 1 targets
[ 3.3600050] cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00005, 2.5+> cdrom
removable
[ 3.3800050] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100), NCQ (32 tags)
[ 3.3800050] cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode
5 (Ultra/100) (using DMA), NCQ (31 tags)
ext2fs: part:1:device:wd0: warning: FILESYSTEM NOT UNMOUNTED CLEANLY; PLEASE
fsck
ext2fs: part:1:device:wd0: warning: MOUNTED READ-ONLY; MUST USE `fsysopts
--writable'
Hurd server bootstrap: ext2fs[part:1:device:wd0] exec startup proc auth.
Starting runsystem
ext2fs: part:1:device:wd0: warning: FILESYSTEM NOT UNMOUNTED CLEANLY; PLEASE
fsck
e2fsck 1.47.4 (6-Mar-2025)
/sbin/fsck.ext2: No such device or address while trying to open /usr/dev/wd0s1
Possibly non-existent or swap device?
ext2fs: part:1:device:wd0: warning: FILESYSTEM NOT UNMOUNTED CLEANLY; PLEASE
fsck
ext2fs: part:1:device:wd0: warning: UNCLEANED FILESYSTEM NOW WRITABLE
Starting /hurd/init
Starting runsystem
swapon: No swap partitions found in /etc/fstab
Automatic boot in progress...
Thu Mar 26 22:00:44 UTC 2026
[ 5.7300050] entropy: best effort
/sbin/fsck.ext2: No such device or address while trying to open /usr/dev/wd0s1
Possibly non-existent or swap device?
ext2fs: part:1:device:wd0: warning: FILESYSTEM NOT UNMOUNTED CLEANLY; PLEASE
fsck
ext2fs: part:1:device:wd0: warning: UNCLEANED FILESYSTEM NOW WRITABLE
Automatic boot failed... help!
sh-5.3#
thanks, sam
signature.asc
Description: PGP signature
