Hi.
I use ospfd from zebra-0.95a package under FreeBSD 5.5.
My em0 interface have follow IP address:
195.BBB.CCC.2/28
195.BBB.CCC.4/32
195.BBB.CCC.6/32
195.BBB.CCC.9/32
195.BBB.CCC.10/32
When I configure daemon from console (telnet 127.0.0.1 ospfd),
I send commands:
conf term
router ospf
ospf router-id 195.BBB.CCC.2
redistribute kernel
redistribute connected
redistribute static
passive-interface em0 195.BBB.CCC.4
passive-interface em0 195.BBB.CCC.6
passive-interface em0 195.BBB.CCC.9
passive-interface em0 195.BBB.CCC.10
network 195.BBB.CCC.0/28 area 0.0.0.1
area 1 authentication message-digest
distribute-list 50 out kernel
distribute-list 52 out connected
distribute-list 50 out static
All work.
But on show run I see:
router ospf
ospf router-id 195.BBB.CCC.2
redistribute kernel
redistribute connected
redistribute static
passive-interface 195.BBB.CCC.4
passive-interface 195.BBB.CCC.6
passive-interface 195.BBB.CCC.9
passive-interface 195.BBB.CCC.10
network 195.BBB.CCC.0/28 area 0.0.0.1
area 1 authentication message-digest
distribute-list 50 out kernel
distribute-list 52 out connected
distribute-list 50 out static
Where in line passive-interface my interface em0?
When I say write memory, in /usr/local/etc/ospfd.conf line
passive-interface not have name of interface 'em0'.
When I stop/start ospfd with this configuration file, ospfd say
'Please specify an existing interface'... I fix /usr/local/etc/ospfd.conf,
add em0 in line passive-interface. Ospfd started without errors.
Ivan.
e-mail:[EMAIL PROTECTED]
_______________________________________________
bug-zebra mailing list
bug-zebra@gnu.org
http://lists.gnu.org/mailman/listinfo/bug-zebra
