Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. Openmoko Bug #1983: eth0 doesn't exist / Oops during bootup
(Openmoko Public Trac)
2. Re: Openmoko Bug #1974: Enlightenment is slow to start /
restart / update (Openmoko Public Trac)
3. Re: Openmoko Bug #1841: white screen of death (WSOD) after
resume (Openmoko Public Trac)
4. Re: Openmoko Bug #1841: white screen of death (WSOD) after
resume (Openmoko Public Trac)
5. Re: Openmoko Bug #1610: it can save as same name(duplicate),
same number and same group name as well. (Openmoko Public Trac)
6. Re: Openmoko Bug #1983: eth0 doesn't exist / Oops during
bootup (Openmoko Public Trac)
7. Re: Openmoko Bug #1841: white screen of death (WSOD) after
resume (Openmoko Public Trac)
--- Begin Message ---
#1983: eth0 doesn't exist / Oops during bootup
---------------------+------------------------------------------------------
Reporter: Weiss | Owner: openmoko-devel
Type: defect | Status: new
Priority: normal | Milestone:
Component: unknown | Version:
Severity: normal | Keywords: wifi kernel
Blockedby: | Reproducible: always
Blocking: |
---------------------+------------------------------------------------------
Rootfs: Om2008.8-gta02-20080904.rootfs.jffs2
Kernel: Om2008.8-gta02-20080903.uImage.bin
I find the wifi interface (eth0) doesn't exist - only lo and usb0 (when
connected) appear in 'ifconfig'. This leads to wifi not working at all
(iwconfig, ifconfig and friends all fail with "No such device" or
similar). Accordingly, I get "Wifi: unknown" in Settings.
While studying 'dmesg' (or just watching the bootup messages), I noticed a
kernel oops in a module which I suspect may be related. A log is attached
which is the output from 'dmesg' after a bootup before any suspending was
allowed to happen. I suspect that useful messages may have scrolled off
the top of the ring buffer - please let me know if there's anything I can
do to capture this information without using a debug board, if it'd be
useful. However, the backtrace is there.
Other features: GPS, voice calls, SMS, suspend etc all work very nicely
indeed for me.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1983>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1974: Enlightenment is slow to start / restart / update
---------------------------+------------------------------------------------
Reporter: Treviño | Owner: raster
Type: defect | Status: closed
Priority: normal | Milestone:
Component: E - Illume | Version: Om2008.8
Severity: normal | Resolution: fixed
Keywords: | Blockedby:
Reproducible: always | Blocking:
---------------------------+------------------------------------------------
Comment(by Treviño):
Ok, I've understood. :/
Thanks for your exhaustive replies anyway! :)
However using the default theme performs better than using the tango
ones...
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1974#comment:5>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1841: white screen of death (WSOD) after resume
----------------------------+-----------------------------------------------
Reporter: Rorschach | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version: GTA02v5
Severity: critical | Resolution:
Keywords: wsod,resume | Blockedby:
Reproducible: always | Blocking:
----------------------------+-----------------------------------------------
Comment(by nelg):
any update on this defect?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1841#comment:12>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1841: white screen of death (WSOD) after resume
----------------------------+-----------------------------------------------
Reporter: Rorschach | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version: GTA02v5
Severity: critical | Resolution:
Keywords: wsod,resume | Blockedby:
Reproducible: always | Blocking:
----------------------------+-----------------------------------------------
Comment(by [EMAIL PROTECTED]):
If you are experiencing this problem, can you please attach the output
from "dmesg"?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1841#comment:13>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1610: it can save as same name(duplicate), same number and same group name as
well.
---------------------------+------------------------------------------------
Reporter: regina_kim | Owner: charlie
Type: defect | Status: accepted
Priority: high | Milestone: Om2008.9
Component: Qtopia | Version:
Severity: major | Resolution:
Keywords: | Blockedby:
Reproducible: | Blocking:
---------------------------+------------------------------------------------
Changes (by charlie):
* status: assigned => accepted
Comment:
I just added a warning message for the case when we add a group already
presents.
There is still no check for "same number" though.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1610#comment:10>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1983: eth0 doesn't exist / Oops during bootup
----------------------------+-----------------------------------------------
Reporter: Weiss | Owner: openmoko-devel
Type: defect | Status: new
Priority: normal | Milestone:
Component: unknown | Version:
Severity: normal | Resolution:
Keywords: wifi kernel | Blockedby:
Reproducible: always | Blocking:
----------------------------+-----------------------------------------------
Comment(by werner):
Seems that the WLAN module isn't responding to the driver. The Oops
is just sloppy error handling. Did WLAN ever work on this device ?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1983#comment:1>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1841: white screen of death (WSOD) after resume
----------------------------+-----------------------------------------------
Reporter: Rorschach | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version: GTA02v5
Severity: critical | Resolution:
Keywords: wsod,resume | Blockedby:
Reproducible: always | Blocking:
----------------------------+-----------------------------------------------
Comment(by nelg):
Below is a dmesg, during a wsof. I suspended, waited, tried to resume.
got wsof. plugged in the neo freerunner, and logged in, then got the
dmesg.
This is running: qtopia-4.3.3-snapshot-09012242-gta02-flash.tgz
I have had the wsof with om2008.8-update as well.
{{{
[EMAIL PROTECTED]:~# cat /etc/om-version
Tag Name:
VERSION: 20be0ea74a43d5a66f9506940e359986e6a1924b
Branch: org.openmoko.dev
Build Host: buildhost.openmoko.org
Time Stamp: Sun, 10 Aug 2008 02:43:00 +0200
[EMAIL PROTECTED]:~# uname -a
Linux om-gta02 2.6.24 #4 PREEMPT Sun Aug 3 16:16:27 CDT 2008 armv4tl
unknown
[EMAIL PROTECTED]:~# dmesg
c>] (dump_stack+0x0/0x14) from [<c016655c>] (kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c887088c r7:c8870a6c r6:bf047cc0 r5:00000000 r4:bf0450cc
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
snd: exports duplicate symbol snd_add_device_sysfs_file (owned by kernel)
snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
snd_timer: exports duplicate symbol snd_timer_interrupt (owned by kernel)
snd_pcm: exports duplicate symbol snd_pcm_notify (owned by kernel)
snd_soc_core: exports duplicate symbol snd_soc_put_volsw_2r (owned by
kernel)
snd_soc_wm8753: exports duplicate symbol soc_codec_dev_wm8753 (owned by
kernel)
snd_soc_s3c24xx: exports duplicate symbol s3c24xx_soc_platform (owned by
kernel)
snd_soc_s3c24xx_i2s: exports duplicate symbol s3c24xx_i2s_dai (owned by
kernel)
sysfs: duplicate filename 'soc-audio' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
[<c002ebec>] (dump_stack+0x0/0x14) from [<c00d8444>]
(sysfs_add_one+0x50/0xfc)
[<c00d83f4>] (sysfs_add_one+0x0/0xfc) from [<c00d8b40>]
(create_dir+0x58/0xa8)
r6:fffffff4 r5:c7481df0 r4:c754cb0c
[<c00d8ae8>] (create_dir+0x0/0xa8) from [<c00d8bd0>]
(sysfs_create_dir+0x40/0x60)
r8:c886b45c r7:c03db7f8 r6:00000000 r5:c7632600 r4:c7632670
[<c00d8b90>] (sysfs_create_dir+0x0/0x60) from [<c01664cc>]
(kobject_add+0xf4/0x1d0)
r4:c7632670
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c01a54e8>]
(device_add+0x88/0x48c)
[<c01a5460>] (device_add+0x0/0x48c) from [<c01a9400>]
(platform_device_add+0x100/0x154)
[<c01a9300>] (platform_device_add+0x0/0x154) from [<bf042064>]
(neo1973_gta02_init+0x64/0xc8 [snd_soc_neo1973_gta02_wm8753])
r7:00000001 r6:bf040da0 r5:bf040f04 r4:fffffff4
[<bf042000>] (neo1973_gta02_init+0x0/0xc8 [snd_soc_neo1973_gta02_wm8753])
from [<c006b7d4>] (sys_init_module+0x13d8/0x14bc)
r5:c7e5f660 r4:c7e5f688
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
kobject_add failed for soc-audio with -EEXIST, don't try to register
things with the same name in the same directory.
[<c002ebec>] (dump_stack+0x0/0x14) from [<c016655c>]
(kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c01a54e8>]
(device_add+0x88/0x48c)
[<c01a5460>] (device_add+0x0/0x48c) from [<c01a9400>]
(platform_device_add+0x100/0x154)
[<c01a9300>] (platform_device_add+0x0/0x154) from [<bf042064>]
(neo1973_gta02_init+0x64/0xc8 [snd_soc_neo1973_gta02_wm8753])
r7:00000001 r6:bf040da0 r5:bf040f04 r4:fffffff4
[<bf042000>] (neo1973_gta02_init+0x0/0xc8 [snd_soc_neo1973_gta02_wm8753])
from [<c006b7d4>] (sys_init_module+0x13d8/0x14bc)
r5:c7e5f660 r4:c7e5f688
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
snd: exports duplicate symbol snd_add_device_sysfs_file (owned by kernel)
snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
snd_timer: exports duplicate symbol snd_timer_interrupt (owned by kernel)
snd_pcm: exports duplicate symbol snd_pcm_notify (owned by kernel)
snd_soc_core: exports duplicate symbol snd_soc_put_volsw_2r (owned by
kernel)
snd_soc_wm8753: exports duplicate symbol soc_codec_dev_wm8753 (owned by
kernel)
snd_soc_s3c24xx: exports duplicate symbol s3c24xx_soc_platform (owned by
kernel)
snd_soc_s3c24xx_i2s: exports duplicate symbol s3c24xx_i2s_dai (owned by
kernel)
Only GTA01 hardware supported by ASoc driver
ADDRCONF(NETDEV_UP): usb0: link is not ready
Alignment trap: hald-probe-volu (1299) PC=0x0000ce78 Instr=0xe59b300c
Address=0xbeb9e5aa FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce94 Instr=0xe59b1008
Address=0xbeb9e5a6 FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce78 Instr=0xe59b300c
Address=0xbeb9e5ba FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce94 Instr=0xe59b1008
Address=0xbeb9e5b6 FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce78 Instr=0xe59b300c
Address=0xbeb9e5ca FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce94 Instr=0xe59b1008
Address=0xbeb9e5c6 FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce78 Instr=0xe59b300c
Address=0xbeb9e5da FSR 0x013
Alignment trap: hald-probe-volu (1299) PC=0x0000ce94 Instr=0xe59b1008
Address=0xbeb9e5d6 FSR 0x013
neo1973-pm-bt neo1973-pm-bt.0: GTA02 Set PCF50633 LDO4 = 3200
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
usb 1-1: configuration #1 chosen from 1 choice
bluetooth: exports duplicate symbol bt_sock_wait_state (owned by kernel)
bluetooth: exports duplicate symbol bt_sock_wait_state (owned by kernel)
sysfs: duplicate filename 'hci_usb' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
[<c002ebec>] (dump_stack+0x0/0x14) from [<c00d8444>]
(sysfs_add_one+0x50/0xfc)
[<c00d83f4>] (sysfs_add_one+0x0/0xfc) from [<c00d8b40>]
(create_dir+0x58/0xa8)
r6:fffffff4 r5:c6c03e48 r4:c744b954
[<c00d8ae8>] (create_dir+0x0/0xa8) from [<c00d8bd0>]
(sysfs_create_dir+0x40/0x60)
r8:00000008 r7:bf040e6c r6:bf042568 r5:bf042520 r4:bf042568
[<c00d8b90>] (sysfs_create_dir+0x0/0x60) from [<c01664cc>]
(kobject_add+0xf4/0x1d0)
r4:bf042568
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
kobject_add failed for hci_usb with -EEXIST, don't try to register things
with the same name in the same directory.
[<c002ebec>] (dump_stack+0x0/0x14) from [<c016655c>]
(kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
sysfs: duplicate filename 'hci_usb' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
[<c002ebec>] (dump_stack+0x0/0x14) from [<c00d8444>]
(sysfs_add_one+0x50/0xfc)
[<c00d83f4>] (sysfs_add_one+0x0/0xfc) from [<c00d8b40>]
(create_dir+0x58/0xa8)
r6:fffffff4 r5:c6c4fe48 r4:c744b954
[<c00d8ae8>] (create_dir+0x0/0xa8) from [<c00d8bd0>]
(sysfs_create_dir+0x40/0x60)
r8:00000008 r7:bf040e6c r6:bf042568 r5:bf042520 r4:bf042568
[<c00d8b90>] (sysfs_create_dir+0x0/0x60) from [<c01664cc>]
(kobject_add+0xf4/0x1d0)
r4:bf042568
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
kobject_add failed for hci_usb with -EEXIST, don't try to register things
with the same name in the same directory.
[<c002ebec>] (dump_stack+0x0/0x14) from [<c016655c>]
(kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
mapped channel 10 to 2
kernel BUG at net/bluetooth/rfcomm/tty.c:313!
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = c76ac000
[00000000] *pgd=37602031, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT
Modules linked in: ipv6
CPU: 0 Not tainted (2.6.24 #4)
PC is at __bug+0x20/0x2c
LR is at preempt_schedule+0x48/0x58
pc : [<c002e5fc>] lr : [<c0300d50>] psr: 60000013
sp : c76b1e88 ip : c76b1dd8 fp : c76b1e94
r10: c74c9e00 r9 : c76b0000 r8 : c002a0e8
r7 : c0426c50 r6 : bee9d5c0 r5 : 400452c9 r4 : c75e73e0
r3 : 00000000 r2 : c76b0000 r1 : c75ef9e0 r0 : 00000031
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: c000717f Table: 376ac000 DAC: 00000015
Process qpe (pid: 1363, stack limit = 0xc76b0268)
Stack: (0xc76b1e88 to 0xc76b2000)
1e80: c76b1eac c76b1e98 c02dd4e4 c002e5ec 400452c9
c75e73e0
1ea0: c76b1eec c76b1eb0 c02ddfb4 c02dd4cc 00000000 00000004 00000000
00000000
1ec0: 00000000 00000000 c74c9e00 400452c9 bee9d5c0 c0426c50 c002a0e8
00000000
1ee0: c76b1f0c c76b1ef0 c02dbfec c02ddb18 c76b1f24 c77e8360 400452c9
bee9d5c0
1f00: c76b1f2c c76b1f10 c0256c1c c02dbfc4 c77e8360 bee9d5c0 400452c9
00000036
1f20: c76b1f4c c76b1f30 c00a42ac c0256a30 c00980c0 c77e8360 c798be48
bee9d5c0
1f40: c76b1f7c c76b1f50 c00a45c0 c00a4280 c76b1f7c c76b1f60 c0098418
c77e8360
1f60: fffffff7 400452c9 00000036 c002a0e8 c76b1fa4 c76b1f80 c00a4630
c00a431c
1f80: c0257ed0 00000001 0050ba50 00000000 0000003d 0050ba64 00000000
c76b1fa8
1fa0: c0029f40 c00a4600 00000000 0000003d 0000003d 400452c9 bee9d5c0
00000004
1fc0: 00000000 0000003d 0050ba64 00000036 0028abd8 bee9d694 403346f0
00449dc0
1fe0: 002788c0 bee9d5c0 402a38b0 4ac0dd4c 20000010 0000003d 00000000
00000000
Backtrace:
[<c002e5dc>] (__bug+0x0/0x2c) from [<c02dd4e4>] (rfcomm_dev_del+0x28/0xac)
[<c02dd4bc>] (rfcomm_dev_del+0x0/0xac) from [<c02ddfb4>]
(rfcomm_dev_ioctl+0x4ac/0x7f8)
r4:c75e73e0
[<c02ddb08>] (rfcomm_dev_ioctl+0x0/0x7f8) from [<c02dbfec>]
(rfcomm_sock_ioctl+0x38/0x4c)
[<c02dbfb4>] (rfcomm_sock_ioctl+0x0/0x4c) from [<c0256c1c>]
(sock_ioctl+0x1fc/0x258)
r6:bee9d5c0 r5:400452c9 r4:c77e8360
[<c0256a20>] (sock_ioctl+0x0/0x258) from [<c00a42ac>] (do_ioctl+0x3c/0x9c)
r7:00000036 r6:400452c9 r5:bee9d5c0 r4:c77e8360
[<c00a4270>] (do_ioctl+0x0/0x9c) from [<c00a45c0>] (vfs_ioctl+0x2b4/0x2e4)
r6:bee9d5c0 r5:c798be48 r4:c77e8360
[<c00a430c>] (vfs_ioctl+0x0/0x2e4) from [<c00a4630>] (sys_ioctl+0x40/0x60)
r8:c002a0e8 r7:00000036 r6:400452c9 r5:fffffff7 r4:c77e8360
[<c00a45f0>] (sys_ioctl+0x0/0x60) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
r6:0050ba64 r5:0000003d r4:00000000
Code: e1a01000 e59f000c eb006922 e3a03000 (e5833000)
---[ end trace bf02e3b86bfa0554 ]---
usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet
ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
usb0: no IPv6 routers present
usb 1-1: USB disconnect, address 2
neo1973-pm-bt neo1973-pm-bt.0: GTA02 Set PCF50633 LDO4 = 3200
usb 1-1: new full speed USB device using s3c2410-ohci and address 3
usb 1-1: configuration #1 chosen from 1 choice
bluetooth: exports duplicate symbol bt_sock_wait_state (owned by kernel)
bluetooth: exports duplicate symbol bt_sock_wait_state (owned by kernel)
sysfs: duplicate filename 'hci_usb' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
[<c002ebec>] (dump_stack+0x0/0x14) from [<c00d8444>]
(sysfs_add_one+0x50/0xfc)
[<c00d83f4>] (sysfs_add_one+0x0/0xfc) from [<c00d8b40>]
(create_dir+0x58/0xa8)
r6:fffffff4 r5:c6ca5e48 r4:c744bda0
[<c00d8ae8>] (create_dir+0x0/0xa8) from [<c00d8bd0>]
(sysfs_create_dir+0x40/0x60)
r8:00000008 r7:bf040e6c r6:bf042568 r5:bf042520 r4:bf042568
[<c00d8b90>] (sysfs_create_dir+0x0/0x60) from [<c01664cc>]
(kobject_add+0xf4/0x1d0)
r4:bf042568
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
kobject_add failed for hci_usb with -EEXIST, don't try to register things
with the same name in the same directory.
[<c002ebec>] (dump_stack+0x0/0x14) from [<c016655c>]
(kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
sysfs: duplicate filename 'hci_usb' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
[<c002ebec>] (dump_stack+0x0/0x14) from [<c00d8444>]
(sysfs_add_one+0x50/0xfc)
[<c00d83f4>] (sysfs_add_one+0x0/0xfc) from [<c00d8b40>]
(create_dir+0x58/0xa8)
r6:fffffff4 r5:c7407e48 r4:c744bda0
[<c00d8ae8>] (create_dir+0x0/0xa8) from [<c00d8bd0>]
(sysfs_create_dir+0x40/0x60)
r8:00000008 r7:bf040e6c r6:bf042568 r5:bf042520 r4:bf042568
[<c00d8b90>] (sysfs_create_dir+0x0/0x60) from [<c01664cc>]
(kobject_add+0xf4/0x1d0)
r4:bf042568
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
kobject_add failed for hci_usb with -EEXIST, don't try to register things
with the same name in the same directory.
[<c002ebec>] (dump_stack+0x0/0x14) from [<c016655c>]
(kobject_add+0x184/0x1d0)
[<c01663d8>] (kobject_add+0x0/0x1d0) from [<c006a16c>]
(mod_sysfs_setup+0x28/0xb4)
[<c006a144>] (mod_sysfs_setup+0x0/0xb4) from [<c006b38c>]
(sys_init_module+0xf90/0x14bc)
r8:c886ca04 r7:c886cbbc r6:bf042520 r5:00000000 r4:bf040e6c
[<c006a3fc>] (sys_init_module+0x0/0x14bc) from [<c0029f40>]
(ret_fast_syscall+0x0/0x2c)
mapped channel 10 to 2
mapped channel 10 to 2
mapped channel 10 to 2
neo1973-pm-bt neo1973-pm-bt.0: GTA02 Set PCF50633 LDO4 = 3300
usb 1-1: USB disconnect, address 3
mapped channel 10 to 2
Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s)
pcf50633 0-0073: pcf50633_suspend
glamo-mci glamo-mci.0: faking cmd 7 during suspend
mmc_set_power(power_mode=0, vdd=0
glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
gta02_udc_command(2)
suspending dma channel 0
suspending dma channel 1
suspending dma channel 2
suspending dma channel 3
GSTATUS3 0x303cb70c
GSTATUS4 0x00000000
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
gta02_udc_command(1)
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
not changing prescaler of PWM 3, since it's shared with timer4 (clock
tick)
timer_usec_ticks = 7864
timer tcon=00599109, tcnt a2c1, tcfg 00000200,00002000, usec 00001eb8
mmc_set_power(power_mode=1, vdd=20
SD power -> 3200mV
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz).
Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: Error after cmd: 0x120
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req:
16666kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req:
16666kHz). Bus width=2
soc-audio soc-audio: scheduling resume work
PM: Finishing wakeup.
Restarting tasks ... <6>soc-audio soc-audio: starting resume work
done.
soc-audio soc-audio: resume work completed
usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet
[EMAIL PROTECTED]:~#
}}}
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1841#comment:14>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
