buglog Digest, Vol 833, Issue 1

Fri, 23 Jan 2009 16:52:00 -0800 

Send buglog mailing list submissions to
        [email protected]

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
        [email protected]

You can reach the person managing the list at
        [email protected]

When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."

Today's Topics:

   1. Openmoko Bug #2216: Call = there is no sound
      (Openmoko Public Trac)
   2. Re: Openmoko Bug #2216: Call = there is no sound
      (Openmoko Public Trac)
   3. Re: Openmoko Bug #2216: Call = there is no sound
      (Openmoko Public Trac)
   4. Openmoko Bug #2217: Noise screen of death: Freerunner looses
      SDIO      connection (Openmoko Public Trac)
--- Begin Message --- 
#2216: Call = there is no sound
----------------------+-----------------------------------------------------
 Reporter:  octavsly  |          Owner:  openmoko-devel                
     Type:  defect    |         Status:  new                           
 Priority:  high      |      Milestone:  Om2008.12                     
Component:  unknown   |        Version:  GTA02v6                       
 Severity:  major     |       Keywords:  call, mute, no sound, no audio
 Haspatch:  0         |      Blockedby:                                
Estimated:            |    Patchreview:                                
 Blocking:            |   Reproducible:                                
----------------------+-----------------------------------------------------
 When I initiate a call, and when the call is progressing, I cannot hear
 anything, nor I am heard. I never had this problem before. Adjusting the
 volume via the slide-bar does not change anything.

 I have searched through the tickets but I cannot find anyone having the
 same problem.


 I am using the latest stable Om image.

 I have also attached a logread file (replacing the test phone number with
 "xxxxxxxxxx"



 {{{

 r...@om-gta02:/media/card/boot# cat /proc/cpuinfo
 Processor       : ARM920T rev 0 (v4l)
 BogoMIPS        : 199.47
 Features        : swp half thumb
 CPU implementer : 0x41
 CPU architecture: 4T
 CPU variant     : 0x1
 CPU part        : 0x920
 CPU revision    : 0
 Cache type      : write-back
 Cache clean     : cp15 c7 ops
 Cache lockdown  : format A
 Cache format    : Harvard
 I size          : 16384
 I assoc         : 64
 I line length   : 32
 I sets          : 8
 D size          : 16384
 D assoc         : 64
 D line length   : 32
 D sets          : 8

 Hardware        : GTA02
 Revision        : 0360
 Serial          : 0000000000000000
 }}}

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/2216>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac

--- End Message ---
--- Begin Message --- 
#2216: Call = there is no sound
----------------------+-----------------------------------------------------
 Reporter:  octavsly  |          Owner:  openmoko-devel                
     Type:  defect    |         Status:  new                           
 Priority:  high      |      Milestone:  Om2008.12                     
Component:  unknown   |        Version:  GTA02v6                       
 Severity:  major     |       Keywords:  call, mute, no sound, no audio
 Haspatch:  0         |      Blockedby:                                
Estimated:            |    Patchreview:                                
 Blocking:            |   Reproducible:                                
----------------------+-----------------------------------------------------

Comment(by lindi):

 Can you run "alsactl -f current.state store" during call and attach
 "current.state" to this bug report?

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/2216#comment:1>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac

--- End Message ---
--- Begin Message --- 
#2216: Call = there is no sound
----------------------+-----------------------------------------------------
 Reporter:  octavsly  |          Owner:  openmoko-devel                
     Type:  defect    |         Status:  new                           
 Priority:  high      |      Milestone:  Om2008.12                     
Component:  unknown   |        Version:  GTA02v6                       
 Severity:  major     |       Keywords:  call, mute, no sound, no audio
 Haspatch:  0         |      Blockedby:                                
Estimated:            |    Patchreview:                                
 Blocking:            |   Reproducible:                                
----------------------+-----------------------------------------------------

Comment(by octavsly):

 Replying to [comment:1 lindi]:
 > Can you run "alsactl -f current.state store" during call and attach
 "current.state" to this bug report?

 Updated (testing branch) and rebooted. The problem is gone.
 When I will have again the issue, I will attach it.

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/2216#comment:2>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac

--- End Message ---
--- Begin Message --- 
#2217: Noise screen of death: Freerunner looses SDIO connection
-----------------------------+----------------------------------------------
 Reporter:  xbaldauf         |          Owner:  openmoko-kernel
     Type:  defect           |         Status:  new            
 Priority:  normal           |      Milestone:                 
Component:  System Software  |        Version:                 
 Severity:  major            |       Keywords:                 
 Haspatch:  0                |      Blockedby:                 
Estimated:                   |    Patchreview:                 
 Blocking:                   |   Reproducible:                 
-----------------------------+----------------------------------------------
 Hello,

 When the Freerunner is under load (especially when booting), it happens
 that the SDIO connection between CPU and glamo chip as well as between CPU
 and SDHC card breaks. Often, this break is only transient. During this
 time, the freerunner spits out kernel messages like these:

 [20377.570000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.570000] mmcblk0: error -110 sending read/write command
 [20377.595000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.600000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.600000] mmcblk0: error -110 sending read/write command
 [20377.605000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.620000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.620000] mmcblk0: error -110 sending read/write command
 [20377.625000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.650000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.650000] mmcblk0: error -110 sending read/write command
 [20377.655000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.680000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.680000] mmcblk0: error -110 sending read/write command
 [20377.690000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.715000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.715000] mmcblk0: error -110 sending read/write command
 [20377.720000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.765000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.765000] mmcblk0: error -110 sending read/write command
 [20377.775000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.800000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.800000] mmcblk0: error -110 sending read/write command
 [20377.805000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.845000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.845000] mmcblk0: error -110 sending read/write command
 [20377.850000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.865000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.865000] mmcblk0: error -110 sending read/write command
 [20377.880000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.885000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.885000] mmcblk0: error -110 sending read/write command
 [20377.890000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.910000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20377.910000] mmcblk0: error -110 sending read/write command
 [20377.915000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.950000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20377.950000] mmcblk0: error -110 sending read/write command
 [20377.955000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20377.985000] glamo-mci glamo-mci.0: Error after cmd: 0x120
 [20377.985000] mmcblk0: error -110 sending read/write command
 [20377.990000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.015000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.015000] mmcblk0: error -110 sending read/write command
 [20378.050000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.055000] glamo-mci glamo-mci.0: Error after cmd: 0x120
 [20378.055000] mmcblk0: error -110 sending read/write command
 [20378.060000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.070000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.070000] mmcblk0: error -110 sending read/write command
 [20378.075000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.110000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.110000] mmcblk0: error -110 sending read/write command
 [20378.115000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.160000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.160000] mmcblk0: error -110 sending read/write command
 [20378.165000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.185000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.185000] mmcblk0: error -110 sending read/write command
 [20378.190000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.200000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.200000] mmcblk0: error -110 sending read/write command
 [20378.205000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.250000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.250000] mmcblk0: error -110 sending read/write command
 [20378.315000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.320000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.320000] mmcblk0: error -110 sending read/write command
 [20378.325000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.340000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.340000] mmcblk0: error -110 sending read/write command
 [20378.345000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.380000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.380000] mmcblk0: error -110 sending read/write command
 [20378.395000] end_request: I/O error, dev mmcblk0, sector 11183840
 [20378.455000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.455000] mmcblk0: error -110 sending read/write command
 [20378.460000] end_request: I/O error, dev mmcblk0, sector 9979414
 [20378.460000] end_request: I/O error, dev mmcblk0, sector 9979422
 [20378.465000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.470000] mmcblk0: error -110 sending read/write command
 [20378.480000] end_request: I/O error, dev mmcblk0, sector 9979438
 [20378.480000] end_request: I/O error, dev mmcblk0, sector 9979446
 [20378.490000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.490000] mmcblk0: error -110 sending read/write command
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979462
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979470
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979478
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979486
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979494
 [20378.495000] end_request: I/O error, dev mmcblk0, sector 9979502
 [20378.500000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
 [20378.520000] mmcblk0: error -110 sending read/write command
 [20378.520000] end_request: I/O error, dev mmcblk0, sector 9979518
 [20378.525000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.530000] mmcblk0: error -110 sending read/write command
 [20378.580000] end_request: I/O error, dev mmcblk0, sector 9979542
 [20378.580000] end_request: I/O error, dev mmcblk0, sector 9979550
 [20378.585000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.590000] mmcblk0: error -110 sending read/write command
 [20378.615000] end_request: I/O error, dev mmcblk0, sector 9979566
 [20378.615000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.620000] mmcblk0: error -110 sending read/write command
 [20378.625000] end_request: I/O error, dev mmcblk0, sector 9979542
 [20378.665000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
 [20378.665000] mmcblk0: error -110 sending read/write command
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992380
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992388
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992396
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992404
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992412
 [20378.670000] end_request: I/O error, dev mmcblk0, sector 1992420
 [20378.685000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.685000] mmcblk0: error -110 sending read/write command
 [20378.690000] end_request: I/O error, dev mmcblk0, sector 1992508
 [20378.695000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.700000] mmcblk0: error -110 sending read/write command
 [20378.710000] end_request: I/O error, dev mmcblk0, sector 1992540
 [20378.710000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20378.715000] mmcblk0: error -110 sending read/write command
 [20378.720000] end_request: I/O error, dev mmcblk0, sector 1992572
 [20378.730000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20378.730000] mmcblk0: error -110 sending read/write command
 [20378.735000] end_request: I/O error, dev mmcblk0, sector 1992508
 [20379.270000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20379.270000] mmcblk0: error -110 sending read/write command
 [20379.280000] end_request: I/O error, dev mmcblk0, sector 11162288
 [20379.285000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20379.285000] mmcblk0: error -110 sending read/write command
 [20379.295000] end_request: I/O error, dev mmcblk0, sector 11162288
 [20384.005000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20384.005000] mmcblk0: error -110 sending read/write command
 [20384.010000] glamo-mci glamo-mci.0: Error after cmd: 0x8022
 [20384.015000] end_request: I/O error, dev mmcblk0, sector 1333568
 [20384.050000] glamo-mci glamo-mci.0: Error after cmd: 0x22
 [20384.050000] mmcblk0: error -84 sending read/write command
 [20384.060000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.065000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.070000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.075000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.080000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.085000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.090000] mmcblk0: error -84 requesting status
 [20384.095000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880864
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880866
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880868
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880870
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880872
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880874
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880876
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880878
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880880
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880882
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880884
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880886
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880888
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880890
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880892
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880894
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880896
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880898
 [20384.100000] end_request: I/O error, dev mmcblk0, sector 7880900
 [20384.135000] glamo-mci glamo-mci.0: Error after cmd: 0x22
 [20384.135000] mmcblk0: error -84 sending read/write command
 [20384.140000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.145000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.155000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.155000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.160000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.165000] glamo-mci glamo-mci.0: Error after cmd: 0x202
 [20384.170000] mmcblk0: error -84 requesting status
 [20384.175000] glamo-mci glamo-mci.0: Error after cmd: 0x8202
 [20384.180000] end_request: I/O error, dev mmcblk0, sector 7867966
 [20389.945000] glamo-mci glamo-mci.0: Error after cmd: 0x20
 [20389.945000] mmcblk0: error -110 sending read/write command
 [20389.955000] end_request: I/O error, dev mmcblk0, sector 7949666
 [20389.970000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
 [20389.970000] mmcblk0: error -110 sending read/write command
 [20389.980000] glamo-mci glamo-mci.0: Error after cmd: 0x120
 [20389.980000] end_request: I/O error, dev mmcblk0, sector 1051962
 [20393.490000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
 [20393.490000] mmcblk0: error -110 sending read/write command
 [20393.500000] end_request: I/O error, dev mmcblk0, sector 7949666

 This makes the filesystem driver remount the filesystem - in the best case
 - and to not find certain files. Thus, almost always, the system crashes
 due to the inavailability of files.


 When the error happens, the screen is filled with noise, e.g. it looks
 like colorfull snow.

 I'm using the self-compiled testing kernel "Linux om-gta02
 2.6.28-GTA02_master2_4ff379a06a70e179-mokodev #2 PREEMPT Sun Jan 18
 23:40:09 CET 2009 armv4tl unknown" (as of
 
http://git.openmoko.org/?p=kernel.git;a=log;h=4ff379a06a70e17997e196c9c393bc7c8648e42a
 ).

 My system boots from SDHC card, so any IO traffic goes over the SDIO
 connection.

 I can reproduce that problem reliably, about 40% of all reboots fail.
 (Just rebooting shows the problem.)

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/2217>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac

--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog

Reply via email to