Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
2. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
3. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
4. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
5. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
6. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
7. Re: Openmoko Bug #2341: u-boot environment isn't saved
(Openmoko Public Trac)
8. Re: Openmoko Bug #2340: glamo-mci should use
MODULE_DEVICE_TABLE (Openmoko Public Trac)
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by aikipooh):
lindi:
I've tried to use fw_setenv. I don't understand anything!
It shows me the environment, it looks ok. I can set the variables there,
alright. But they have no effect on what i see in u-boot prompt. After
reboot, when i issue fw_printenv under linux, i see changed values again.
Looks like we live in different manvantaras.
Are the settings for GTA02v6 proper?
/dev/mtd2 0x00000 0x40000 0x20000
2
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:3>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by lindi):
Your fw_env.config looks ok. Maybe you are booting u-boot from NOR?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:4>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by aikipooh):
Replying to [comment:4 lindi]:
> Your fw_env.config looks ok. Maybe you are booting u-boot from NOR?
Hm, i'm not very sure in these matters...
What i'm doing now is trying to make the device work, i have problem with
highdensity card. I want a kernel that boots (i think the one stored on
inner flash, it's NAND, no?) to have glamo parameters tweaked from the
command line. And i've figured that i cannot set the parameters to
persistent values.
Maybe i'm doing something terribly wrong, i don't know...
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:5>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by lindi):
What output do you get from
strings /dev/mtdblock0 | grep ^U-Boot | head -n1
and
strings /dev/mtdblock1 | grep ^U-Boot | head -n1
commands? Also, what version number does u-boot console report?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:6>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by aikipooh):
Replying to [comment:6 lindi]:
> What output do you get from
>
> strings /dev/mtdblock0 | grep ^U-Boot | head -n1
No strings on my system, but the first hit of 'od -c /dev/mtdblock0 |grep
-A5 "U -"' (if we're lucky and U- are one the same line) looks like:
0461420 0 \0 006 \0 005 \0 \0 \0 \0 \0 \0 \0 U - B o
0461440 o t 1 . 3 . 2 - m o k o 1 2
0461460 ( M a y 9 2 0 0 8 - 1
0461500 0 : 2 8 : 4 8 ) \0 \0 \0 \0 234 z 372 3
>
> and
>
> strings /dev/mtdblock1 | grep ^U-Boot | head -n1
I cannot find anything there (tried with different possible lines
splitting)
>
> commands? Also, what version number does u-boot console report?
It's 1.3.2-moko12
PS. Funny, trac interprets carets in text...
PS. I'm answering to gena2x too, i'm confused now.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:7>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by aikipooh):
Replying to [comment:2 gena2x]:
> also you can try to prepare environment on your host and flash it
directly via dfu-util. to do this use tools from here:
http://svn.openmoko.org/trunk/src/host/devirginator/
>
> you need envedit.pl
>
> only difficult thing - adjust your environment size for gta02 or it will
not work. i think it should be 2564 but unsure.
I've tried with envedit.pl, and there they are, my settings. But i don't
see them in /proc/cmdline. That must be because of my misunderstanding of
the boot process, they're fetched from wrong place...
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:8>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2341: u-boot environment isn't saved
----------------------+-----------------------------------------------------
Reporter: aikipooh | Owner: openmoko-devel
Type: defect | Status: new
Priority: highest | Milestone:
Component: unknown | Version:
Severity: critical | Keywords: nand
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible: always
----------------------+-----------------------------------------------------
Comment(by lindi):
aikipooh, your NOR has u-boot 1.3.2-moko12. Your NAND does not seem to
have u-boot. You can not modify NOR. Maybe your AUX button is stuck so
that you always boot NOR?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2341#comment:9>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2340: glamo-mci should use MODULE_DEVICE_TABLE
----------------------------+-----------------------------------------------
Reporter: ThibG | Owner: openmoko-kernel
Type: enhancement | Status: closed
Priority: normal | Milestone:
Component: kernel | Version: unspecified
Severity: normal | Resolution: fixed
Keywords: | Haspatch: 1
Blockedby: | Estimated:
Patchreview: | Blocking:
Reproducible: |
----------------------------+-----------------------------------------------
Changes (by lars):
* status: new => closed
* resolution: => fixed
Comment:
Hi
Thanks, I applied your patch.
- Lars
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2340#comment:3>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
