Please try:http://leaf.dragonflybsd.org/~sephe/rgephy.diff You will have rebuild kernel if you have a compiled-in miiIf you use mii as module, you will have to recompile mii module I have done a rough test with my re(4) Please let us know whether it works or not ASAP, not much time is left :-)Thank you in advance. Best Regards,sephe On 12/22/05, Tomaž Borštnar <[EMAIL PROTECTED]> wrote:> Jeroen Ruigrok/asmodai pravi:> > -On [20050719 00:55], George Georgalis ([EMAIL PROTECTED]) wrote:> >> call me grateful to have a $19.95 Gigabit PCI Adapter! ...I'll be> >> watching the commits!> >> > Got the docs now, yes it has its own PHY.> >> > I will add some stuff to the driver over the weekend.> >> DragonFly 1.3.7-DEVELOPMENT #0: Wed Dec 21 15:32:39 GMT 2005>>> re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xa400-0xa4ff mem 0xfb801> 000-0xfb8010ff irq 10 at device 2.0 on pci2> miibus0: <MII bus> on re0> ukphy0: <Generic IEEE 802.3u media interface> on miibus0> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto> re0: MAC address: 00:0e:2e:28:08:1f>> Connected to GigE switch:>> [web2] ~> ifconfig re0> re0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500> options=18<VLAN_MTU,VLAN_HWTAGGING>> inet 10.10.52.50 netmask 0xffffff00 broadcast 10.10.52.255> ! inet6 fe80::20e:2eff:fe28:81f%re0 prefixlen 64 scopeid 0x1> ether 00:0e:2e:28:08:1f> media: Ethernet autoselect (100baseTX <full-duplex>)> status: active>>> So it appears that this 8169S still needs some driver modification as it does not know about GigE physical interface.> This is from LevelOne add-on PCI card.>>> Tomaž>> Tomaž>
--Live Free or Die
