Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.9.0-DEVELOPMENT #0: Wed Jul 11 00:50:58 CEST 2007
    root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1097403747 Hz, i8254 clock: 1193271 Hz
CPU: Intel(R) Pentium(R) M processor 1.10GHz (1097.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1333596160 (1302340K bytes)
avail memory = 1283670016 (1253584K bytes)
Preloaded elf kernel "/kernel" at 0xc07ee000.
Preloaded elf module "/modules/snd_ich.ko" at 0xc07ee2d8.
Preloaded elf module "/modules/sound.ko" at 0xc07ee380.
Preloaded elf module "/modules/est.ko" at 0xc07ee428.
Preloaded elf module "/modules/ehci.ko" at 0xc07ee4cc.
Preloaded elf module "/modules/acpi.ko" at 0xc07ee574.
Enhanced SpeedStep (940 mV) 1100 MHz
Enhanced SpeedStep frequencies available (MHz): 1100 1000 900 800 600
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fb7d0
ACPI: RSDP @ 0x0xfc9b0/0x0014 (v  0 DELL  )
ACPI: RSDT @ 0x0x4f7d1f90/0x0040 (v  1 DELL    CPi R   0x27D6071A ASL  0x00000061)
ACPI: FACP @ 0x0x4f7d2c00/0x0074 (v  1 DELL    CPi R   0x27D6071A ASL  0x00000061)
ACPI: DSDT @ 0x0x4f7d3800/0x2F96 (v  1 INT430 SYSFexxx 0x00001001 MSFT 0x0100000E)
ACPI: FACS @ 0x0x4f7e2000/0x0040
ACPI: APIC @ 0x0x4f7d3400/0x0068 (v  1 DELL    CPi R   0x27D6071A ASL  0x00000047)
ACPI: ASF! @ 0x0x4f7d3000/0x005B (v 16 DELL    CPi R   0x27D6071A ASL  0x00000061)
ACPI: MCFG @ 0x0x4f7d33c0/0x003E (v 16 DELL    CPi R   0x27D6071A ASL  0x00000061)
ACPI: SSDT @ 0x0x4f7d23e6/0x01FC (v  1  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522)
ACPI: SSDT @ 0x0x4f7d220e/0x01D8 (v  1  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522)
ACPI: SSDT @ 0x0x4f7d2013/0x01FB (v  1  PmRef    CpuPm 0x00003000 INTL 0x20030522)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <DELL CPi R  > on motherboard
ACPI: SSDT @ 0x0x4f7d1fd0/0x0043 (v  1  LMPWR  DELLLOM 0x00001001 INTL 0x20030522)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pci0: <Intel model 2592 VGA-compatible display device> at 2.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x2792) at 2.1
pcib1: <PCI to PCI bridge (vendor=8086 device=2660)> at device 28.0 on pci0
pci1: <PCI bus> on pcib1
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfdf0000-0xdfdfffff irq 11 at device 0.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseT PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:12:3f:69:db:d8
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: 2 ports with 2 removable, self powered
umass0: Dell USB Drive A04, rev 2.00/2.00, addr 2
umass0: Get Max Lun not supported (STALLED)
umass1: JMicron JM20338 SATA, USB Combo, rev 2.00/1.00, addr 3
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 10 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: 2 ports with 2 removable, self powered
ugen0: vendor 0x413c product 0x8103, rev 2.00/24.22, addr 2
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 9 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 7 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 11 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
intr 11 at 40001/40000 hz, livelocked limit engaged!
usb4: <Intel 82801FB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
umass1: at uhub0 port 2 (addr 3) disconnected
umass1: detached
ugen0: at uhub1 port 1 (addr 2) disconnected
ugen0: detached
uhub4: 8 ports with 8 removable, self powered
intr 11 at 0/20000 hz, livelock removed
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:30 INTC routed to irq 10
pcib2: routed slot 1 INTA to irq 10
fwohci0: <Ricoh R5C552> mem 0xdfcfe800-0xdfcfefff irq 9 at device 1.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 37:4f:c0:00:24:4c:ec:30
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 36:4f:c0:4c:ec:30
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <unknown card> (vendor=0x1180, dev=0x0822) at 1.2 irq 10
pci2: <unknown card> (vendor=0x8086, dev=0x4220) at 3.0 irq 10
pcm0: <Intel ICH6 (82801FB)> port 0xec40-0xec7f,0xed00-0xedff mem 0xdfebfd00-0xdfebfdff,0xdfebfe00-0xdfebffff irq 11 at device 30.2 on pci0
pcm0: <SigmaTel STAC9752/53 AC97 Codec>
pci0: <unknown card> (vendor=0x8086, dev=0x266d) at 30.3 irq 10
isab0: <PCI to ISA bridge (vendor=8086 device=2641)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ad0: 57231MB <TOSHIBA MK6006GAH BZ002A> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
orm0: <Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
umass0: Dell USB Drive A04, rev 2.00/2.00, addr 2
umass0: Get Max Lun not supported (STALLED)
umass1: JMicron JM20338 SATA, USB Combo, rev 2.00/1.00, addr 3
Mounting root from ufs:/dev/da0s1a
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <_NEC DVD+-RW ND-6650A 102C> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: cd present [131920 x 2048 byte records]
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <WDC WD25 WD-WCANK3138630 2E01> Fixed Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
ugen0: vendor 0x413c product 0x8103, rev 2.00/24.22, addr 2
WARNING: #da/0x20000 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20003 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20004 si_iosize_max=0, using DFLTPHYS.