On Sun, Oct 12, 2008 at 9:52 PM, Sepherosa Ziehau <[EMAIL PROTECTED]> wrote: > > Sepherosa Ziehau <[EMAIL PROTECTED]> added the comment: > > On Thu, Oct 9, 2008 at 1:20 PM, Archimedes Gaviola > <[EMAIL PROTECTED]> wrote: >> Hi, >> >> I have a mini-PCI wireless network adapter on my laptop that wasn't >> detected on DragonFly 2.0.0 during installation. Since it wasn't >> detected, what I did is performing the steps in the >> bwi(4) manual >> http://leaf.dragonflybsd.org/cgi/web-man?command=bwi§ion=ANY >> and download the firmware at >> http://leaf.dragonflybsd.org/~sephe/bwi/v3.tbz. Now, the driver were >> detected (Broadcom BCM4311) but seems not functional. It doesn't show >> up after invoking ifconfig. Below is the dmesg output: >> >> device_probe_and_attach: bwi0 attach returned 6 >> Preloaded elf module "/modules/if_bwi.ko" at 0xc07b93c8. >> bwi0: <Broadcom BCM4311 802.11 Wireless Lan> mem 0x31300000-0x31303fff >> irq 11 at device 0.0 on pci1 >> bwi0: BBP: id 0x4311, rev 0x2, pkg 0 >> bwi0: MAC rev 13 is not supported >> bwi0: no MAC was found >> >> And as I try looking at the /usr/src/sys/dev/netif/bwi/if_bwi.c code, >> BCM4311 is part of the supported device >> >> { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM4311, >> "Broadcom BCM4311 802.11 Wireless Lan" }, > > Different MAC revs normally share same PCI id. AFAIK, only relative > old 4311 works (I don't have any). I would appreciate, if you could > update bwi according to the latest reverse-engineered spec :). I > don't have time to do it currently. > > Best Regards, > sephe > > ---------- > status: unread -> chatting > > _____________________________________________________ > DragonFly issue tracker <[EMAIL PROTECTED]> > <https://bugs.dragonflybsd.org/issue1148> > _____________________________________________________ >
Hi Sephe, Thanks for your reply. Okay let me try updating bwi. Where can I find that latest reversed-engineered spec you've mentioned? I only have the data sheet downloaded from Broadcom's web site. Archimedes
