Issue #846 has been updated by tuxillo. Description updated Category set to Driver Status changed from New to Feedback Assignee deleted (0) Target version set to Unverifiable
Hi, Moving it to unverifiable. Feel free to update if you can test it again. Cheers, Antonio Huete ---------------------------------------- Bug #846: USB bugs:usb mouse can't used! http://bugs.dragonflybsd.org/issues/846#change-12470 * Author: frankning * Status: Feedback * Priority: Normal * Assignee: * Category: Driver * Target version: Unverifiable ---------------------------------------- I had use DFB 1.8.0,then my usb mouse can use.When I update to 1.10 and new version, the usb mouse cant't use.Someone can help me? Thanks! Following is my dmesg: Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly 1.11.0-DEVELOPMENT #2: Tue Nov 13 00:12:24 CST 2007 frank@:/usr/obj/usr/src/sys/NETONE TSC clock: 1666701140 Hz, i8254 clock: 1193164 Hz CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (1666.74-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO V,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,XTPR,RSVD15> Hyperthreading: 2 logical CPUs real memory = 937951232 (915968K bytes) avail memory = 899067904 (877996K bytes) APIC_IO: MP table broken: ExtINT entry corrupt! APIC_IO: MP table broken: IRQ 15 not ISA when IRQ 14 is! Programming 24 pins in IOAPIC #0 DragonFly/MP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178021, at 0xfec00000 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 SMP: AP CPU #1 Launched! objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32 Preloaded elf kernel "/kernel" at 0xc078e000. Preloaded elf module "/modules/acpi.ko" at 0xc078e2b0. Pentium Pro MTRR support enabled md0: Malloc disk pcibios: BIOS version 2.10 Using $PIR table, 19 entries at 0xc00fde90 ACPI: RSDP @ 0x0xf74f0/0x0014 (v 0 PTLTD ) ACPI: RSDT @ 0x0x37e8ec8c/0x0034 (v 1 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) ACPI: FACP @ 0x0x37e95ef2/0x0074 (v 1 ATI Bonefish 0x06040000 ATI 0x000F4240) ACPI: DSDT @ 0x0x37e8f69b/0x6857 (v 1 ATI SB450 0x06040000 MSFT 0x03000000) ACPI: FACS @ 0x0x37e96fc0/0x0040 ACPI: APIC @ 0x0x37e95f66/0x005E (v 1 PTLTD APIC 0x06040000 LTP 0x00000000) ACPI: MCFG @ 0x0x37e95fc4/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000) ACPI: SSDT @ 0x0x37e8ecc0/0x0535 (v 1 PmRef CpuPm 0x00003000 INTL 0x20050228) npx0: <math processor> on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: Power Button (fixed) Warning: ACPI is disabling APM's device. You can't run both acpi_ec0: <Embedded Controller: GPE 0x10> port 0x66,0x62 on acpi0 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu1: Failed to attach throttling P_CNT acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% Warning: ACPI idle hook not yet supported for SMP psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 legacypci0 on motherboard pcib0: <Host to PCI bridge> on legacypci0 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1002 device=5a3f)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 5a62 graphics accelerator> at 5.0 irq 10 pcib2: <PCI to PCI bridge (vendor=1002 device=5a36)> at device 4.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <unknown card> (vendor=0x14e4, dev=0x4312) at 0.0 irq 10 pcib3: <PCI to PCI bridge (vendor=1002 device=5a37)> at device 5.0 on pci0 pci5: <PCI bus> on pcib3 atapci0: <ATI IXP400 SATA150 controller> port 0x8400-0x840f,0x8410- 0x8413,0x8420-0x8427,0x8430-0x8433,0x8440-0x8447 irq 2 at device 18.0 on pci0 ata2: <ATA channel 0> on atapci0 ad4: 95396MB <FUJITSU MHV2100BH PL 00000029> at ata2-master SATA150 ata3: <ATA channel 1> on atapci0 ohci0: <ATI SB400 USB Controller> mem 0xc0504000-0xc0504fff irq 5 at device 19.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0505000-0xc0505fff irq 5 at device 19.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 4 ports with 4 removable, self powered pci0: <USB controller> at 19.2 irq 5 pci0: <unknown card> (vendor=0x1002, dev=0x4372) at 20.0 atapci1: <ATI IXP400 UDMA133 controller> port 0x8460-0x846f,0x376,0x170- 0x177,0x3f6,0x1f0-0x1f7 irq 9 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/GAH1> at ata0-master UDMA33 ata1: <ATA channel 1> on atapci1 pci0: <unknown card> (vendor=0x1002, dev=0x437b) at 20.2 irq 9 isab0: <PCI to ISA bridge (vendor=1002 device=4377)> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <PCI to PCI bridge (vendor=1002 device=4371)> at device 20.4 on pci0 pci8: <PCI bus> on pcib4 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xc0200000-0xc02007ff irq 2 at device 7.0 on pci8 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:60:b0:00:00:1e:fe:b6 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 fwe0: MAC address: 02:60:b0:1e:fe:b6 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci8: <unknown card> (vendor=0x1180, dev=0x0822) at 7.1 irq 10 pci8: <unknown card> (vendor=0x1180, dev=0x0843) at 7.2 irq 10 pci8: <unknown card> (vendor=0x1180, dev=0x0592) at 7.3 irq 10 rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0201400-0xc02014ff irq 11 at device 8.0 on pci8 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: MAC address: 00:19:bb:00:95:5d orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xdf000-0xdffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: can't drain, serial port might not exist, disabling sio1: can't drain, serial port might not exist, disabling ppc0: parallel port not found. Mounting root from ufs:/dev/ad4s1a cd0 at ata2 bus 0 target 0 lun 0 cd0: <TSSTcorp CD/DVDW TS-L632D GAH1> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed cpu0: Performance states changed cpu0: Cx states changed -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
