Issue #3214 has been updated by peeter.
OK the panic is fixed with zrj's patch. The kprintf error is still there: --- Copyright (c) 2003-2019 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly v5.7.0.1026.g4192c9-DEVELOPMENT #3: Mon Nov 18 14:27:20 EET 2019 root@saturn:/usr/obj/usr/src/sys/X86_64_GENERIC acpi_hpet: frequency 14318180 Using cputimer HPET for TSC calibration Timer latency (in TSC ticks): 3556 min=3240 max=3816 TSC invariant clock: 3600000210 Hz CPU: AMD Ryzen 7 3700X 8-Core Processor (3600.00-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x870f10 Stepping = 0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x76d8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,AVX,F16C,RDRND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCX_CORE,PCX_NB,DBE,PCX_L2I,MWAITX,<b30>> Structured Extended Features=0x219c91a9<GSFSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP> Thermal and PM Features=0x4<ARAT> MONITOR/MWAIT Features=0x3<CST,INTBRK> CPU Special Features Installed: SMAP SMEP real memory = 68647346176 (65467 MB) avail memory = 66430472192 (63353 MB) LAPIC AMD elvt0: 0x00010000 LAPIC AMD elvt1: 0x00010000 LAPIC AMD elvt2: 0x00010000 LAPIC AMD elvt3: 0x00010000 LAPIC latency (in TSC ticks): 331 min: 324 max: 360 lapic: divisor index 0, frequency 49999996 Hz core_bits 7 logical_CPU_bits 0 2-way htt, 1 Nodes, 64 cores/node CPU Topology: cores_per_chip: 8; threads_per_core: 2; chips_per_package: 1; Compute unit iDS: 0-0; srat_probe: can't locate SRAT SMI Frequency (worst case): 342 Hz (2919 us) Initialize MI interrupts for 16 cpus TSC testing MP synchronization ... TSC MPSYNC TEST 8532 16 -> 533 (10uS=36000) TSC is MP synchronized TSC: cputimer freq 112500006, shift 5 Spectre: support=( STIBP IBPB STIBP_AUTO IBRS_REQUESTED ) req=0010 operating=( STIBP_AUTO ) MDS: support=( MDS_NOT_REQUIRED ) req=0000 operating=( none ) wdog: In-kernel automatic watchdog reset enabled evdev device loaded. kbd1 at kbdmux0 md0: Malloc disk interrupt uses mplock: swi_taskq ACPI: RSDP 0x00000000DBDC7000 000024 (v02 ALASKA) ACPI: XSDT 0x00000000DBDC7098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FACP 0x00000000DBDCE308 000114 (v06 ALASKA A M I 01072009 AMI 00010013) ACPI: DSDT 0x00000000DBDC71E8 00711D (v02 ALASKA A M I 01072009 INTL 20120913) ACPI: FACS 0x00000000DBE33E00 000040 ACPI: APIC 0x00000000DBDCE420 00015E (v03 ALASKA A M I 01072009 AMI 00010013) ACPI: FPDT 0x00000000DBDCE580 000044 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FIDT 0x00000000DBDCE5C8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: SSDT 0x00000000DBDCE668 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009) ACPI: SSDT 0x00000000DBDCE768 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) ACPI: SSDT 0x00000000DBDD7400 003190 (v01 AMD AMD AOD 00000001 INTL 20120913) ACPI: MCFG 0x00000000DBDDA590 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) ACPI: AAFT 0x00000000DBDDA5D0 00047C (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) ACPI: HPET 0x00000000DBDDAA50 000038 (v01 ALASKA A M I 01072009 AMI 00000005) ACPI: SSDT 0x00000000DBDDAA88 000024 (v01 AMDBIX BIXBY 00001000 INTL 20120913) ACPI: UEFI 0x00000000DBDDAAB0 000042 (v01 ALASKA A M I 00000002 01000013) ACPI: BGRT 0x00000000DBDDAAF8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: SSDT 0x00000000DBDDAB30 002314 (v01 AMD AMD CPU 00000001 AMD 00000001) ACPI: CRAT 0x00000000DBDDCE48 001558 (v01 AMD AMD CRAT 00000001 AMD 00000001) ACPI: CDIT 0x00000000DBDDE3A0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) ACPI: SSDT 0x00000000DBDDE3D0 001D34 (v01 AMD AmdTable 00000001 INTL 20120913) ACPI: WSMT 0x00000000DBDE0108 000028 (v01 ALASKA A M I 01072009 AMI 00010013) sc0: <System console> on motherboard sc0: EFI_FB <16 virtual consoles, flags=0x700> cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard ACPI: 7 ACPI AML tables successfully acquired and loaded ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI select level/low acpi0: Power Button (fixed) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_timer0 on acpi0 cpu0: <ACPI CPU> on acpi0 cpu_cst0: <ACPI CPU C-State> on cpu0 cpu_pst0: <ACPI CPU P-State> on cpu0 cpu1: acpi id mismatch, madt 2, processor object 1 cpu1: <ACPI CPU> on acpi0 cpu_cst1: <ACPI CPU C-State> on cpu1 cpu_pst1: <ACPI CPU P-State> on cpu1 cpu2: acpi id mismatch, madt 4, processor object 2 cpu2: <ACPI CPU> on acpi0 cpu_cst2: <ACPI CPU C-State> on cpu2 cpu_pst2: <ACPI CPU P-State> on cpu2 cpu3: acpi id mismatch, madt 6, processor object 3 cpu3: <ACPI CPU> on acpi0 cpu_cst3: <ACPI CPU C-State> on cpu3 cpu_pst3: <ACPI CPU P-State> on cpu3 cpu4: acpi id mismatch, madt 8, processor object 4 cpu4: <ACPI CPU> on acpi0 cpu_cst4: <ACPI CPU C-State> on cpu4 cpu_pst4: <ACPI CPU P-State> on cpu4 cpu5: acpi id mismatch, madt 10, processor object 5 cpu5: <ACPI CPU> on acpi0 cpu_cst5: <ACPI CPU C-State> on cpu5 cpu_pst5: <ACPI CPU P-State> on cpu5 cpu6: acpi id mismatch, madt 12, processor object 6 cpu6: <ACPI CPU> on acpi0 cpu_cst6: <ACPI CPU C-State> on cpu6 cpu_pst6: <ACPI CPU P-State> on cpu6 cpu7: acpi id mismatch, madt 14, processor object 7 cpu7: <ACPI CPU> on acpi0 cpu_cst7: <ACPI CPU C-State> on cpu7 cpu_pst7: <ACPI CPU P-State> on cpu7 cpu8: acpi id mismatch, madt 1, processor object 8 cpu8: <ACPI CPU> on acpi0 cpu_cst8: <ACPI CPU C-State> on cpu8 cpu_pst8: <ACPI CPU P-State> on cpu8 cpu9: acpi id mismatch, madt 3, processor object 9 cpu9: <ACPI CPU> on acpi0 cpu_cst9: <ACPI CPU C-State> on cpu9 cpu_pst9: <ACPI CPU P-State> on cpu9 cpu10: acpi id mismatch, madt 5, processor object 10 cpu10: <ACPI CPU> on acpi0 cpu_cst10: <ACPI CPU C-State> on cpu10 cpu_pst10: <ACPI CPU P-State> on cpu10 cpu11: acpi id mismatch, madt 7, processor object 11 cpu11: <ACPI CPU> on acpi0 cpu_cst11: <ACPI CPU C-State> on cpu11 cpu_pst11: <ACPI CPU P-State> on cpu11 cpu12: acpi id mismatch, madt 9, processor object 12 cpu12: <ACPI CPU> on acpi0 cpu_cst12: <ACPI CPU C-State> on cpu12 cpu_pst12: <ACPI CPU P-State> on cpu12 cpu13: acpi id mismatch, madt 11, processor object 13 cpu13: <ACPI CPU> on acpi0 cpu_cst13: <ACPI CPU C-State> on cpu13 cpu_pst13: <ACPI CPU P-State> on cpu13 cpu14: acpi id mismatch, madt 13, processor object 14 cpu14: <ACPI CPU> on acpi0 cpu_cst14: <ACPI CPU C-State> on cpu14 cpu_pst14: <ACPI CPU P-State> on cpu14 cpu15: <ACPI CPU> on acpi0 cpu_cst15: <ACPI CPU C-State> on cpu15 cpu_pst15: <ACPI CPU P-State> on cpu15 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <NVME-PCIe> mem 0xfcf00000-0xfcf03fff irq 24 at device 0.0 on pci1 nvme0: mapped 17 MSIX IRQs nvme0: NVME Version 1.3 maxqe=16384 caps=000000303c033fff nvme0: Model Samsung_SSD_970_EVO_Plus_500GB BaseSerial S4EVNF0M666007H nscount=1 nvme0: Request 32/16 queues, Returns 32/16 queues, optimal map nvme0: Interrupt Coalesce: 100uS / 4 qentries nvme0: Disk nvme0 ns=1 blksize=512 lbacnt=976773168 cap=465GB serno=S4EVNF0M666007H-1 pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 28 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib3: No _PRT found, routing with pci pcib3: No _PRT found, routing with pci pcib3: No _PRT found, routing with pci pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci3 pci4: <ACPI PCI bus> on pcib4 pcib4: No _PRT found, routing with pci pcib3: No _PRT found, routing with pci igb0: <Intel(R) PRO/1000 I211_COPPER> port 0xf000-0xf01f mem 0xfc820000-0xfc823fff,0xfc800000-0xfc81ffff irq 30 at device 0.0 on pci4 igb0: MAC address: 70:85:c2:db:71:58 pcib5: <ACPI PCI-PCI bridge> irq 28 at device 8.0 on pci3 pci5: <ACPI PCI bus> on pcib5 pcib5: No _PRT found, routing with pci pcib3: No _PRT found, routing with pci pcib5: No _PRT found, routing with pci pcib3: No _PRT found, routing with pci pci5: <unknown> (vendor 0x1022, dev 0x1485) at device 0.0 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc500000-0xfc5fffff irq 28 at device 0.1 on pci5 xhci0: 64 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc400000-0xfc4fffff irq 30 at device 0.3 on pci5 ugen0.1: <0x1022> at usbus0 xhci1: 64 bytes context size, 64-bit DMA uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib6: <MPTABLE PCI-PCI bridge> irq 29 at device 9.0 on pci3 pci6: <PCI bus> on pcib6 ugen1.1: <0x1022> at usbus1 pcib3: No _PRT found, routing with pci uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ahci0: <AHCI-PCI-SATA> mem 0xfc700000-0xfc7007ff irq 29 at device 0.0 on pci6 ahci0: AE did not auto-clear! uhub0: 10 ports with 10 removable, self powered uhub1: 10 ports with 10 removable, self powered ugen1.2: <Logitech> at usbus1 ums0: <Logitech G203 Prodigy Gaming Mouse, class 0/0, rev 2.00/7.03, addr 1> on usbus1 ums0: 16 buttons and [XYZT] coordinates ID=0 ukbd0: <Logitech G203 Prodigy Gaming Mouse, class 0/0, rev 2.00/7.03, addr 1> on usbus1 kbd2 at ukbd0 : Port bricked, unable to stop (FRE) ahci0: AHCI 1.3.1 cap 0xf337ff00<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps) ahci0.0: Port bricked, unable to stop (FRE) ahci0: unable to disable CR, ignoring port 0 ahci0.0: Port bricked, unable to stop (FRE) ahci0: unable to install interrupt device_probe_and_attach: ahci0 attach returned 6 pcib7: <MPTABLE PCI-PCI bridge> irq 30 at device 10.0 on pci3 pci7: <PCI bus> on pcib7 pcib3: No _PRT found, routing with pci ahci1: <AHCI-PCI-SATA> mem 0xfc600000-0xfc6007ff irq 30 at device 0.0 on pci7 ahci1: AE did not auto-clear! ahci1: AHCI 1.3.1 cap 0xf337ff00<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps) ahci1.0: FBS Cap detected: HW indicates support, enable succeeded ahci1.0: PMPROBE(2) No Port Multiplier was found. ahci1.0: FBS Cap detected: HW indicates support, enable succeeded ahci1.0: PMPROBE(2) No Port Multiplier was found. ahci1.0: Found SSD "Samsung SSD 860 EVO 1TB RVT03B6Q" serial="S3Z9NY0M708838T" ahci1.0: tags=32/32 satacap=850e satacap2=00c6 satafea=016c NCQ=YES capacity=953869.71MB ahci1.0: f85=7469 f86=bc01 f87=4163 WC=enabled RA=enabled SEC=frozen pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0 pci8: <ACPI PCI bus> on pcib8 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfce00000-0xfce3ffff,0xf0000000-0xf07fffff,0xe0000000-0xefffffff irq 54 at device 0.0 on pci8 vgapci0: Boot video device pci8: <multimedia, HDA> (vendor 0x1002, dev 0xaac0) at device 0.1 irq 55 pcib9: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <unknown> (vendor 0x1022, dev 0x148a) at device 0.0 pcib10: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci10: <ACPI PCI bus> on pcib10 pci10: <unknown> (vendor 0x1022, dev 0x1485) at device 0.0 pci10: <encrypt/decrypt> (vendor 0x1022, dev 0x1486) at device 0.1 irq 37 xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff irq 39 at device 0.3 on pci10 xhci2: 64 bytes context size, 64-bit DMA usbus2 on xhci2 usbus2: 5.0Gbps Super Speed USB v3.0 pci10: <multimedia, HDA> (vendor 0x1022, dev 0x1487) at device 0.4 irq 36 pcib11: <ACPI PCI-PCI bridge> at device 8.2 on pci0 ugen2.1: <0x1022> at usbus2 pci11: <ACPI PCI bus> on pcib11 uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 ahci2: <AHCI-PCI-SATA> mem 0xfcd00000-0xfcd007ff irq 41 at device 0.0 on pci11 ahci2: AE did not auto-clear! uhub2: 8 ports with 8 removable, self powered ahci2: AHCI 1.3.1 cap 0xf737ff00<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps) ugen2.2: <American Power Conversion> at usbus2 ugen2.3: <Apple, Inc.> at usbus2 uhub3: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on usbus2 uhub3: 3 ports with 2 removable, bus powered ugen2.4: <Apple Inc.> at usbus2 ukbd1: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.74, addr 3> on usbus2 kbd3 at ukbd1 uhid0: <Apple Inc. Apple Keyboard, class 0/0, rev 2.00/0.74, addr 3> on usbus2 ahci2.0: No device detected pcib12: <ACPI PCI-PCI bridge> at device 8.3 on pci0 pci12: <ACPI PCI bus> on pcib12 ahci3: <AHCI-PCI-SATA> mem 0xfcc00000-0xfcc007ff irq 45 at device 0.0 on pci12 ahci3: AE did not auto-clear! ahci3: AHCI 1.3.1 cap 0xf737ff00<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps) ahci3.0: No device detected pci0: <serial bus, SMBus> (vendor 0x1022, dev 0x790b) at device 20.0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A aesni0: <AES-CBC,AES-XTS> on motherboard padlock0: No ACE support. rdrand0: <RdRand RNG> on motherboard orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 lm0: <Winbond W83627DHG Hardware Monitor> at port 0x290-0x297 on isa0 sio2: can't drain, serial port might not exist, disabling hpt27xx: no controller detected. CAM: Configuring 3 busses CAM: finished configuring all busses da0 at ahci1 bus 0 target 0 lun 0 da0: <SATA Samsung SSD 860 RVT0> Fixed Direct Access SCSI-4 device da0: Serial Number S3Z9NY0M708838T da0: 600.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) da0: supports TRIM Mounting root from hammer2:serno/S4EVNF0M666007H-1.s1d hammer2_mount: root 'serno/S4EVNF0M666007H-1.s1d' hammer2_mount: dev="serno/S4EVNF0M666007H-1.s1d" label="ROOT" rdonly=1 hammer2: using volume header #3 hammer2_mount hmp=0xfffff804919e0000 pmp=0xfffff80103ea1800 DMA space used: 9352k, remaining available: 200952k Mounting devfs hammer2_mount: '/dev/serno/S4EVNF0M666007H-1.s1d@ROOT' hammer2_mount: dev="/dev/serno/S4EVNF0M666007H-1.s1d" label="ROOT" rdonly=1 hammer2 mount "serno/S4EVNF0M666007H-1.s1d": no recovery needed [drm] Initialized [drm] radeon kernel modesetting enabled. drm0: <Tobago PRO [Radeon R7 360 / R9 360 OEM]> on vgapci0 [drm] pdev: vendor=0x1002 device=0x665f rev=0x81 [drm] svendor=0x1458 sdevice=0x22d3 irq=17 [drm] RADEON_IS_PCIE [drm] initializing kernel modesetting (BONAIRE 0x1002:0x665F 0x1458:0x22D3 0x81). radeon: No suitable DMA available. radeon: No coherent DMA available. [drm] register mmio base: 0xFCE00000 [drm] register mmio size: 262144 [drm] doorbell mmio base: 0xF0000000 [drm] doorbell mmio size: 8388608 [drm] radeon_atrm_get_bios: ===> Try ATRM... [drm] radeon_atrm_get_bios: pci_find_class() found: 0:8:0:0, vendor=1002, device=665f [drm] radeon_atrm_get_bios: Get ACPI device handle [drm] radeon_acpi_vfct_bios: ===> Try VFCT... [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND [drm] ATOM BIOS: GV drm0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) drm0: info: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [drm] Detected VRAM RAM=2048M, BAR=256M [drm] RAM width 128bits DDR [TTM] (struct ttm_mem_global *)0xfffff8048684a980 [TTM] Zone kernel: Available graphics memory: 100476 kiB [TTM] Zone dma32: Available graphics memory: 100476 kiB [TTM] Initializing pool allocator [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 2048M of GTT memory ready. [drm] Loading bonaire Microcode [drm] Internal thermal controller with fan control [drm] probing gen 2 caps for device 1002:665f = 3/e [drm] radeon: dpm initialized [drm] Found UVD firmware Version: 1.64 Family ID: 9 [drm] Found VCE firmware/feedback version 40.2.2 / 15! [drm] GART: num cpu pages 524288, num gpu pages 524288 [drm] probing gen 2 caps for device 1002:665f = 3/e [drm] PCIE gen 3 link speeds already enabled [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). drm0: info: WB enabled drm0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xffffb80000102c00 drm0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0xffffb80000102c04 drm0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0xffffb80000102c08 drm0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xffffb80000102c0c drm0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0xffffb80000102c10 drm0: info: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x0xfffff80cff278d30 drm0: info: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0x0xffffb80000102c18 drm0: info: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0x0xffffb80000102c1c [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm:0xffffffff834e7708s] *ERROR* 0xfffff80cfca43430Vdrm0: error: disabling GPU acceleration [drm] radeon_device_init: Taking over the fictitious range 0xe0000000-0xf0000000 [drm] hw_i2c forced on, you may experience display detection problems! tunable drm.video.DP-1 is not set tunable drm.video.HDMI-A-1 is not set tunable drm.video.DVI-D-1 is not set tunable drm.video.DVI-I-1 is not set [drm] Radeon Display Connectors [drm] Connector 0: [drm] DP-1 [drm] HPD2 [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD3 [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-D-1 [drm] HPD1 [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] Connector 3: [drm] DVI-I-1 [drm] HPD6 [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] fb mappable at 0xE070F000 [drm] vram apper at 0xE0000000 [drm] size 33177600 [drm] fb depth is 24 [drm] pitch is 15360 kms console: xpixels 3840 ypixels 2160 [drm] Initialized radeon 2.48.0 20080528 ahci0: <AHCI-PCI-SATA> mem 0xfc700000-0xfc7007ff irq 29 at device 0.0 on pci6 ahci0: AE did not auto-clear! : Port bricked, unable to stop (FRE) ahci0: AHCI 1.3.1 cap 0xf337ff00<S64A,NCQ,SSNTF,SMPS,SAL,SCLO,SAM,SPM,FBSS,PMD,SSC,PSC> cap2 0x0, 1 ports, 32 tags/port, gen 3 (6Gbps) ahci0.0: Port bricked, unable to stop (FRE) ahci0: unable to disable CR, ignoring port 0 ahci0.0: Port bricked, unable to stop (FRE) ahci0: unable to install interrupt device_probe_and_attach: ahci0 attach returned 6 hdac0: <ATI (0xaac0) HDA Controller> mem 0xfce60000-0xfce63fff irq 55 at device 0.1 on pci8 hdac0: link ctrl 0x2937 hdac0: disable nosnoop hdac1: <AMD (0x1487) HDA Controller> mem 0xfcb00000-0xfcb07fff irq 36 at device 0.4 on pci10 hdac1: link ctrl 0x2837 hdac1: disable nosnoop hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 hdacc1: <Realtek (0x0b00) HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek (0x0b00) Audio Function Group> at nid 1 on hdacc1 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 pcm6: <Realtek (0x0b00) (Rear Analog)> at nid 20 and 24,26 on hdaa1 pcm7: <Realtek (0x0b00) (Front Analog)> at nid 27 and 25 on hdaa1 swap low/high-water marks set to 1342174/2013262 --- ---------------------------------------- Bug #3214: master: kernel panics in drm after commit 1dedbd3b06c68f627b7825694444529d5eb2b1bf http://bugs.dragonflybsd.org/issues/3214#change-13837 * Author: peeter * Status: New * Priority: Normal * Assignee: * Category: * Target version: ---------------------------------------- Kernel panics after kldload radeon. The dump is good, but there's no backtrace. I only have ddb output: --- <6>[drm] Initialized <118>Nov 18 11:52:23 saturn kernel: [drm] Initialized <6>[drm] radeon kernel modesetting enabled. drm0: <Tobago PRO [Radeon R7 360 / R9 360 OEM]> on vgapci0 <6>[drm] pdev: vendor=0x1002 device=0x665f rev=0x81 <6>[drm] svendor=0x1458 sdevice=0x22d3 irq=17 <6>[drm] RADEON_IS_PCIE <6>[drm] initializing kernel modesetting (BONAIRE 0x1002:0x665F 0x1458:0x22D3 0x81). <4>radeon: No suitable DMA available. <4>radeon: No coherent DMA available. <6>[drm] register mmio base: 0xFCE00000 <6>[drm] register mmio size: 262144 <6>[drm] doorbell mmio base: 0xF0000000 <6>[drm] doorbell mmio size: 8388608 <6>[drm] radeon_atrm_get_bios: ===> Try ATRM... <6>[drm] radeon_atrm_get_bios: pci_find_class() found: 0:8:0:0, vendor=1002, device=665f <6>[drm] radeon_atrm_get_bios: Get ACPI device handle <6>[drm] radeon_acpi_vfct_bios: ===> Try VFCT... <6>[drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table <6>[drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND <6>[drm] ATOM BIOS: GV drm0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) drm0: info: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF <6>[drm] Detected VRAM RAM=2048M, BAR=256M <6>[drm] RAM width 128bits DDR <6>[TTM] (struct ttm_mem_global *)0xfffff8048684ad80 <6>[TTM] Zone kernel: Available graphics memory: 99196 kiB <6>[TTM] Zone dma32: Available graphics memory: 99196 kiB <6>[TTM] Initializing pool allocator <6>[drm] radeon: 2048M of VRAM memory ready <6>[drm] radeon: 2048M of GTT memory ready. <6>[drm] Loading bonaire Microcode radeonkmsfw_bonaire_k_smc: could not load firmware image, error 2 <3>ci_fw: mixing new and old firmware! <3>[drm:0xffffffff839ebf6as] *ERROR* 0xfffff80d01a2b590Vdrm0: error: Fatal error during GPU init <6>[drm] radeon: finishing device. <6>[TTM] Finalizing pool allocator <6>[TTM] Zone kernel: Used memory at exit: 0 kiB <6>[TTM] Zone dma32: Used memory at exit: 0 kiB <6>[drm] radeon: ttm finalized Fatal user address access from kernel mode from kldload at ffffffff8393dfa0 Fatal trap 12: page fault while in kernel mode cpuid = 0; lapic id = 0 fault virtual address = 0x5c0 fault code = supervisor read data, page not present instruction pointer = 0x8:0xffffffff8393dfa0 stack pointer = 0x10:0xfffff80d01a2b6b0 frame pointer = 0x10:0xfffff80d01a2b6c8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 0, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 977 current thread = pri 10 trap number = 12 panic: page fault cpuid = 0 Trace beginning at frame 0xfffff80d01a2b4a8 trap_fatal() at trap_fatal+0x2d3 0xffffffff80b98bc3 trap_fatal() at trap_fatal+0x2d3 0xffffffff80b98bc3 trap_pfault() at trap_pfault+0x431 0xffffffff80b99161 trap() at trap+0x100 0xffffffff80b99690 calltrap() at calltrap+0x9 0xffffffff80b74e1a --- trap 000000000000000c, rip = ffffffff8393dfa0, rsp = fffff80d01a2b6a0, rbp = fffff80d01a2b6c8 --- radeon_fbdev_restore_mode() at radeon_fbdev_restore_mode 0xffffffff8393dfa0 drm_attach() at drm_attach+0x497 0xffffffff84fb6937 boot() called on cpu#0 Uptime: 1m32s Physical memory: 65419 MB Dumping 4899 MB: 4884 4868 4852 4836 4820 4804 4788 4772 4756 4740 4724 4708 4692 4676 4660 4644 4628 4612 4596 4580 4564 4548 4532 4516 4500 4484 4468 4452 4436 4420 4404 4388 4372 4356 4340 4324 4308 4292 4276 4260 4244 4228 4212 4196 4180 4164 4148 4132 4116 4100 4084 4068 4052 4036 4020 4004 3988 3972 3956 3940 3924 3908 3892 3876 3860 3844 3828 3812 3796 3780 3764 3748 3732 3716 3700 3684 3668 3652 3636 3620 3604 3588 3572 3556 3540 3524 3508 3492 3476 3460 3444 3428 3412 3396 3380 3364 3348 3332 3316 3300 3284 3268 3252 3236 3220 3204 3188 3172 3156 3140 3124 3108 3092 3076 3060 3044 3028 3012 2996 2980 2964 2948 2932 2916 2900 2884 2868 2852 2836 2820 2804 2788 2772 2756 2740 2724 2708 2692 2676 2660 2644 2628 2612 2596 2580 2564 2548 2532 2516 2500 2484 2468 2452 2436 2420 2404 2388 2372 2356 2340 2324 2308 2292 2276 2260 2244 2228 2212 2196 2180 2164 2148 2132 2116 2100 2084 2068 2052 2036 2020 2004 1988 1972 1956 1940 1924 1908 1892 1876 1860 1844 1828 1812 1796 1780 1764 1748 1732 1716 1700 1684 1668 1652 1636 1620 1604 1588 1572 1556 1540 1524 1508 1492 1476 1460 1444 1428 1412 1396 1380 1364 1348 1332 1316 1300 1284 1268 1252 1236 1220 1204 1188 1172 1156 1140 1124 1108 1092 1076 1060 1044 1028 1012 996 980 964 948 932 916 900 884 868 852 836 820 804 788 772 756 740 724 708 692 676 660 644 628 612 596 580 564 548 532 516 500 484 468 452 436 420 404 388 372 356 340 324 308 292 276 260 244 228 212 196 180 164 148 132 116 100 84 68 52 36 20 4 --- Peeter -- -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account