>Number: 6401
>Category: kernel
>Synopsis: pf "pass log; match" fails to log
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: unknown
>Arrival-Date: Mon Jun 14 15:40:01 GMT 2010
>Closed-Date:
>Last-Modified:
>Originator:
>Release:
>Organization:
>Environment:
System : OpenBSD 4.7
Details : OpenBSD 4.7-current (GENERIC) #642: Wed Apr 28 11:46:47
MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
Architecture: OpenBSD.i386
Machine : i386
>Description:
As mentioned on misc@ (William Dunand <william.dunand at
gmail.com>)
When the match rule shown below is used (this is a test
case; this is a pointless rule), packets are not logged.
>How-To-Repeat:
# pfctl -f - << EOF
pass log
match
EOF
tcpdump -nettipflog0 &
ping -c1 8.8.8.8
One would expect to see the traffic logged; it isn't.
>Fix:
Not researched yet. Putting into PR so it's not lost.
dmesg:
OpenBSD 4.7-current (GENERIC) #642: Wed Apr 28 11:46:47 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Opteron(tm) Processor 146 ("AuthenticAMD" 686-class, 1024KB L2 cache)
2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 4227362816 (4031MB)
avail mem = 4115550208 (3924MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/15/06, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.4 @ 0xf8e00 (50 entries)
bios0: vendor American Megatrends Inc. version "080011" date 07/15/2006
bios0: Supermicro H8SSL
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices P1P2(S4) USB0(S1) USB1(S1) USB2(S1) PS2K(S4) PS2M(S4)
SLPB(S1)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 3 pa 0xfec02000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P1P2)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2000! 0xca000/0x1600 0xcb800/0x1600
0xcd000/0x2200 0xcf800/0x1000
cpu0: Cool'n'Quiet K8 1996 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "Intel IOP331 PCIX-PCIX" rev 0x07
pci3 at ppb2 bus 3
ami0 at pci3 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev 0x07:
apic 2 int 4 (irq 9)
ami0: LSI 3008, 32b, FW 814B, BIOS vH431, 128MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 1424784MB, 512 bytes/sec, 2917957632 sec total
scsibus1 at ami0: 16 targets
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 8 (irq 5), address 00:30:48:58:86:40
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 9 (irq 7), address 00:30:48:58:86:41
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 1 int 11 (irq 11) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <OCZ-VERTEX 1275>
wd0: 16-sector PIO, LBA48, 30533MB, 62533296 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
pciide1 at pci1 dev 14 function 1 "ServerWorks HT-1000 SATA" rev 0x00
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0
admcts0 at iic0 addr 0x2c
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM ECC PC3200CL3.0
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM ECC PC3200CL3.0
pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10), version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10), version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
puc0 at pci0 dev 8 function 0 "NetMos Nm9835" rev 0x01: ports: 2 com, 1 lpt
com3 at puc0 port 0 apic 2 int 0 (irq 9): ns16550a, 16 byte fifo
com4 at puc0 port 1 apic 2 int 0 (irq 9): ns16550a, 16 byte fifo
lpt3 at puc0 port 2 apic 2 int 0 (irq 9)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ServerWorks(0x1166), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ServerWorks(0x1166), rev 1.00
port 1 powered
port 2 powered
>Release-Note:
>Audit-Trail:
>Unformatted:
