Hi,
Here I've copied by hand on another pc, what I am seeing on a new install,
booting from a new 4.7 amd64.
I'm stuck on the fdisk, it shows me nonsense I just don't understand or...
So, I am sending this to bug, but I am not on a position to know if that's
really a bug or what.
I am trying to install on a SAS Fujitsu HD, though a LSI SAS card model
SAS3041E-R, supported by OpenBSD hardware (that's why I've bought this one).
I didn't have these errors I am seeing now before (I was able to install 4.5
and 4.6 before on there SAS HDs, just blocked completely now...). Don't know
why there are now problems when I try to install on one of the two SAS HDs I
have (sd0 and sd1). On a Sata HD, from WD, I had no problems. Fdisk works
without any problems. I am sending also below the dmesg of that installation
on the wd0 (the western digital sata hd, where fdisk works). But here, no
way to send any dmesg, I am blocked or stucked on the fdisk part...
So, now the part where I am stucked (same thing on the sd0 and sd1, the 2
are SAS HDs):
fdisk: 1> p
Disk: sd0 geometry: 82594/4/869 [287277984 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
# : id C H S - C H S [ start
: size ]
--------------------------------------------------------------------------------------------------------------------
0 : 0B 0 0 64 - 47141 1 15 [ 63 :
163862937 ] Win95 FAT-32
*1 : 07 47141 1 16 - 58926 2 236 [163863000 :
40965750 ] NFTS
2 : 0F 58926 2 298 - 80422 0 193 [204828811 : 74718254
] Extended LBA
3 : 00 0 0 0 - 0 0 0 [
0 : 0 ] unused
fdisk: 1> e 0
0 : 0B 0 0 64 - 47141 1 15 [ 63 :
163862937 ] Win95 FAT-32
Partition id ('0' to disable) [0 - FF] : [B] (? for help) A6
Do you wish to edit in CHS mode? [n] y
BIOS Starting cylinder [0 - 82593] : [0]
BIOS Starting head [0 - 3]: [0] 1
BIOS Starting sector [1 - 869]: [64] 1
BIOS Ending cylinder [0 - 82593]: [47141] 10199
BIOS Ending head [0 - 3]: [1] 254
'254' is out of range.
BIOS Ending head [0 - 3]: [1]
I just can't continue...
There goes what I've done with the SATA HD which 4.7 i386 installed
correctly and fdisk showed correct numbers:
C H S C H S
0 1 1 10199 254 63 OpenBSD
10200 0 1 12749 254 58 OS/2 hidden
12750 0 1 15299 254 63 NTFS
15300 0 1 36480 254 63 Extended LBA
BIOS Starting cylinder [0 - 36480] : [0]
BIOS Starting head [0 - 254] : [1]
BIOS Starting sector [1 - 63] : [1]
BIOS Ending cylinder [0 - 36480] : [10199]
BIOS Ending head [0 - 254] : [254]
BIOS Ending sector [1 - 63] : [63]
Here goes the dmesg and hw.sensors of the installation on that sata hd where
fdisk worked as normal:
OpenBSD 4.7 (GENERIC.MP <http://generic.mp/>) #449: Wed Mar 17 20:55:07 MDT
2010
[email protected]:/usr/
src/sys/arch/i386/compile/GENERIC.MP <http://generic.mp/>
cpu0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem = 3211870208 (3063MB)
avail mem = 3119964160 (2975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/24/10, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0xf0700 (81 entries)
bios0: vendor American Megatrends Inc. version "0901" date 02/24/2010
bios0: ASUSTeK Computer INC. P6T DELUXE V2
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR SSDT
acpi0: wakeup devices NPE2(S4) NPE4(S4) NPE5(S4) NPE6(S4) NPE8(S4) NPE9(S4)
NPEA(S4) P0P1(S4) PS2K(S4) PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4)
EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) P0P8(S4) P0P9(S4) NPE1(S4) NPE3(S4) NPE7(S4) GBE_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz ("GenuineIntel" 686-class) 2.68
GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec8a000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (NPE2)
acpiprt2 at acpi0: bus -1 (NPE4)
acpiprt3 at acpi0: bus -1 (NPE5)
acpiprt4 at acpi0: bus -1 (NPE6)
acpiprt5 at acpi0: bus -1 (NPE8)
acpiprt6 at acpi0: bus -1 (NPE9)
acpiprt7 at acpi0: bus -1 (NPEA)
acpiprt8 at acpi0: bus 9 (P0P1)
acpiprt9 at acpi0: bus 8 (P0P4)
acpiprt10 at acpi0: bus 7 (P0P5)
acpiprt11 at acpi0: bus 6 (P0P6)
acpiprt12 at acpi0: bus -1 (P0P7)
acpiprt13 at acpi0: bus 5 (P0P8)
acpiprt14 at acpi0: bus 4 (P0P9)
acpiprt15 at acpi0: bus 1 (NPE1)
acpiprt16 at acpi0: bus 2 (NPE3)
acpiprt17 at acpi0: bus 3 (NPE7)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpicpu4 at acpi0: PSS
acpicpu5 at acpi0: PSS
acpicpu6 at acpi0: PSS
acpicpu7 at acpi0: PSS
aibs0 at acpi0
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xfa00 0xd0000/0x2800! 0xd2800/0x5c00
cpu0: EST: PSS not yet available for this processor
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel X58 Host" rev 0x12
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x12
pci1 at ppb0 bus 1
mpi0 at pci1 dev 0 function 0 "Symbios Logic SAS1064E" rev 0x08: apic 9 int
4 (irq 10)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 26 lun 0: <FUJITSU, MBA3147RC, 0103> SCSI3 0/direct
fixed
sd0: 140272MB, 512 bytes/sec, 287277984 sec total
sd1 at scsibus0 targ 27 lun 0: <FUJITSU, MBA3300RC, 0103> SCSI3 0/direct
fixed
sd1: 286102MB, 512 bytes/sec, 585937500 sec total
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x12
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon HD 4870" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci2 dev 0 function 1 "ATI Radeon HD 48xx HD Audio" rev 0x00:
apic 9 int 10 (irq 5)
azalia0: no supported codecs
azalia0: initialization failure, detaching
ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x12
pci3 at ppb2 bus 3
"Intel X58 Misc" rev 0x12 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x12 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x12 at pci0 dev 20 function 2 not configured
"Intel X58 Throttle" rev 0x12 at pci0 dev 20 function 3 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 16
(irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 21
(irq 3)
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 19
(irq 14)
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 18
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00: apic 8
int 22 (irq 7)
azalia1: codecs: Analog Devices AD1989B
audio0 at azalia1
ppb3 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 8 int 17
(irq 5)
pci4 at ppb3 bus 8
ppb4 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: apic 8 int 16
(irq 10)
pci5 at ppb4 bus 7
vendor "Conexant", unknown product 0x8852 (class multimedia subclass video,
rev 0x04) at pci5 dev 0 function 0 not configured
ppb5 at pci0 dev 28 function 2 "Intel 82801JI PCIE" rev 0x00: apic 8 int 18
(irq 11)
pci6 at ppb5 bus 6
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x12, Yukon-2 EC
Ultra rev. B0 (0x3): apic 8 int 18 (irq 11)
msk0 at mskc0 port A: address 00:24:8c:38:49:1a
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb6 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 8 int 17
(irq 5)
pci7 at ppb6 bus 5
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb2: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 8 int 16 (irq 10) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-116D, 1.09> ATAPI 5/cdrom
removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb7 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 8 int 16
(irq 10)
pci8 at ppb7 bus 4
mskc1 at pci8 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x12, Yukon-2 EC
Ultra rev. B0 (0x3): apic 8 int 17 (irq 5)
msk1 at mskc1 port A: address 00:24:8c:38:49:19
eephy1 at msk1 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 23
(irq 4)
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 19
(irq 14)
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 18
(irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 23
(irq 4)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci9 at ppb8 bus 9
"VIA VT6306 FireWire" rev 0xc0 at pci9 dev 2 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 (irq 15) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3000HLFS-01G6U0>
wd0: 16-sector PIO, LBA48, 286168MB, 586072368 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD1002FBYS-02A6B0>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6
wd2 at pciide1 channel 1 drive 0: <WDC WD20EADS-00R6B0>
wd2: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors
atapiscsi1 at pciide1 channel 1 drive 1
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, BDDVDRW GGC-H20L, 1.03> ATAPI
5/cdrom removable
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
cd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 8 int
18 (irq 11)
iic0 at ichiic0
iic0: addr 0x1e 01=01 02=01 10=08 11=01 12=01 13=08 21=01 22=01 31=01 32=01
words 00=0001 01=0101 02=0100 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x20 01=80 02=17 03=7f 10=00 19=b0 20=20 21=00 25=20 26=b2 38=74
39=03 4a=99 6a=2c 78=02 79=08 7a=00 7b=00 7e=82 80=20 8b=37 8c=0b 96=8c
99=41 9a=98 9b=01 d0=00 d1=03 d2=72 d3=72 d4=03 d5=02 d6=01 d7=86 d8=69
d9=00 da=00 db=00 dc=00 dd=00 de=00 df=10 e0=00 e1=00 e2=10 e3=0c e4=10
e5=10 e6=17 e7=10 e8=10 e9=10 ea=10 ec=07 ee=00 ef=00 f1=0e f5=01 f6=02
f9=cd fa=c0 fb=50 words 00=ffff 01=8037 02=1766 03=7fff 04=ffff 05=ffff
06=ffff 07=ffff
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x54: 2GB DDR3 SDRAM PC3-10600
pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 8 int 20 (irq 15) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub8 at uhub0 port 5 "NEC hub" rev 2.00/1.00 addr 2
ugen0 at uhub1 port 2 "E-MU Systems, Inc. E-MU 0404 | USB" rev 2.00/1.00
addr 2
uhub9 at uhub1 port 3 "Belkin Components F5U237 USB 2.0 7-Port Hub" rev
2.00/0.00 addr 3
uaudio0 at uhub9 port 3 configuration 1 interface 0 "Terratec PhonoPreAmp
iVinyl" rev 1.10/0.01 addr 4
uaudio0: audio rev 1.00, 1 mixer controls
audio1 at uaudio0
uhub10 at uhub1 port 4 "Belkin Components F5U237 USB 2.0 7-Port Hub" rev
2.00/0.00 addr 5
uhidev0 at uhub10 port 3 configuration 1 interface 0 "Kensington Kensington
Expert Mouse" rev 1.10/1.00 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub11 at uhub7 port 1 "Lite-On Tech USB 1.1 2 port downstream low-power
hub" rev 1.10/1.26 addr 2
uhidev1 at uhub11 port 3 configuration 1 interface 0 "Lite-On Tech IBM USB
Keyboard with UltraNav" rev 1.10/1.16 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub11 port 3 configuration 1 interface 1 "Lite-On Tech IBM USB
Keyboard with UltraNav" rev 1.10/1.16 addr 3
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
uhidev3 at uhub11 port 4 configuration 1 interface 0 "Synaptics Inc.
Composite TouchPad / TrackPoint" rev 1.10/0.15 addr 4
uhidev3: iclass 3/1
ums1 at uhidev3: 3 buttons
wsmouse1 at ums1 mux 0
uhidev4 at uhub11 port 4 configuration 1 interface 1 "Synaptics Inc.
Composite TouchPad / TrackPoint" rev 1.10/0.15 addr 4
uhidev4: iclass 3/1
ums2 at uhidev4: 3 buttons
wsmouse2 at ums2 mux 0
uhidev5 at uhub7 port 2 configuration 1 interface 0 "HID-compliant Mouse
HID-compliant Mouse" rev 1.10/1.00 addr 5
uhidev5: iclass 3/1
ums3 at uhidev5: 5 buttons, Z dir
wsmouse3 at ums3 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
cpu4: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu1: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu5: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu2: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu6: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu3: unknown i686 model 0x1a, can't get bus clock (0x0)
cpu7: unknown i686 model 0x1a, can't get bus clock (0x0)
hw.sensors.aibs0.temp0=40.50 degC (CPU Temperature), OK
hw.sensors.aibs0.temp1=49.00 degC (MB Temperature), WARNING
hw.sensors.aibs0.fan0=0 RPM (CPU FAN Speed), WARNING
hw.sensors.aibs0.fan1=1328 RPM (CHASSIS1 FAN Speed), OK
hw.sensors.aibs0.fan2=1298 RPM (CHASSIS2 FAN Speed), OK
hw.sensors.aibs0.fan3=1278 RPM (CHASSIS3 FAN Speed), OK
hw.sensors.aibs0.fan4=0 RPM (POWER FAN Speed), WARNING
hw.sensors.aibs0.volt0=1.06 VDC (Vcore Voltage), OK
hw.sensors.aibs0.volt1=3.23 VDC ( +3.3 Voltage), OK
hw.sensors.aibs0.volt2=5.07 VDC ( +5 Voltage), OK
hw.sensors.aibs0.volt3=12.03 VDC ( +12 Voltage), OK
hw.sensors.cpu0.temp0=42.00 degC
hw.sensors.lm0.temp0=49.00 degC
hw.sensors.lm0.temp1=40.50 degC
hw.sensors.lm0.temp2=24.50 degC
hw.sensors.lm0.fan0=1328 RPM
hw.sensors.lm0.volt0=1.06 VDC (VCore)
hw.sensors.lm0.volt1=11.30 VDC (+12V)
hw.sensors.lm0.volt2=3.26 VDC (+3.3V)
hw.sensors.lm0.volt3=3.23 VDC (+3.3V)
hw.sensors.lm0.volt4=-6.66 VDC (-12V)
hw.sensors.lm0.volt5=2.04 VDC
hw.sensors.lm0.volt6=1.22 VDC
hw.sensors.lm0.volt7=3.38 VDC (3.3VSB)
hw.sensors.lm0.volt8=0.00 VDC (VBAT)
