>Number: 6442
>Category: i386
>Synopsis: ddb when starting ral0 with new suspend/resume support
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: unknown
>Arrival-Date: Fri Aug 06 06:10:01 GMT 2010
>Closed-Date:
>Last-Modified:
>Originator:
>Release:
>Organization:
>Environment:
System : OpenBSD 4.8
Details : OpenBSD 4.8-beta (GENERIC) #90: Thu Aug 5 16:04:37 MDT
2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
Architecture: OpenBSD.i386
Machine : i386
>Description:
I typed this in to my Palm Pre, so there are likely transcription
errors.
Stopped at 0x2da7:uvm_fault(0xd0a0360, 0x2000, 0, 1) -> e
kernel: page fault trap, code=3D0
Stopped at db_read_bytes+0x14: movzbl 0(%esi,%ecx,1),%eax
ddb> show panic
the kernel did not panic
ddb> trace
db_read_bytes(2da7,1,dc704d14,0,d0892c0d) at db_read_bytes+0x14
db_get_value(2da7,1,0,0,1) at db_get_value+0x2e
db_disasm(2da7,0,d03ec3c0,0,dc704e90) at db_disasm+0x31
db_print_loc_and_inst(2ad7,dc704dcf,dc704e04,d03af8bd,d0abeae0) at
db_print_loc_and_inst+0x3e
db_trap(9,0,58,dc704e90,d6cfa278) at db_trap+0x71
kdb_trap(9,0,dc704e90,80000000,1234de) at kdb_trap+0x8b
trap() at trap+0x284
--- trap (number 12750396) ---
Bad frame pointer: 0xd6cfa278
0:
ddb>
Three dmesg are included, one with the kernel set to disable apm so I
get
acpi support. It doesn't seem to make a difference with wireless
connectivity. The last is from the Jul 27 bsd where it works.
If I remove hostname.ral0, it boots without ddb and "ifconfig
ral0 scan" seems to work until I attempt to connect to the network.
After I configure the interface so it should connect, it doesn't and at
that point if I try to run dhclient, the machine stops responding. Caps
lock light works, but nothing else seems to and I have to power the
machine off.
>How-To-Repeat:
Install latest snapshot on this machine, boot with my hostname.ral0
hostname.ral0:
nwid theUniverse wpa wpapsk `wpa-psk theUniverse xxx`
dhcp NONE NONE NONE
>Fix:
Unknown
dmesg:
OpenBSD 4.8-beta (GENERIC) #90: Thu Aug 5 16:04:37 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063415808 (1014MB)
avail mem = 1036066816 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/05, BIOS32 rev. 0 @ 0xfd6a0, SMBIOS
rev. 2.3 @ 0xd8010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "R0051V1" date 12/01/2005
bios0: Sony Corporation VGN-TX770P
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6a0/0x960
pcibios0: PCI BIOS has 17 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0x10000! 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1297 MHz: speeds: 1300, 1200, 1100, 1000, 900, 800,
600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
mem address conflict 0x3f700000/0x80000
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: no ifp : irq 10
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: irq 10
azalia0: codecs: Realtek ALC260, Conexant/0x2bfa, using Realtek ALC260
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 6
mem address conflict 0x3f780000/0x1000
cbb0 at pci1 dev 5 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 3
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 5 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 5 function 3 not configured
sdhc0 at pci1 dev 5 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 10
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
fxp0 at pci1 dev 8 function 0 "Intel 82801GB LAN" rev 0x03, i82562: irq 10,
address 00:01:4a:f6:95:7d
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
ral0 at pci1 dev 11 function 0 "Ralink RT2561" rev 0x00: irq 10, address
00:19:db:0f:f7:d9
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x10, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8007GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-832D, 1.61> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
mtrr: Pentium Pro MTRR support
uhub3: device problem, disabling port 1
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ral0: device timeout
OpenBSD 4.8-beta (GENERIC) #90: Thu Aug 5 16:04:37 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063415808 (1014MB)
avail mem = 1036066816 (988MB)
User Kernel Config
UKC> disable apm
351 apm0 disabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/05, BIOS32 rev. 0 @ 0xfd6a0, SMBIOS
rev. 2.3 @ 0xd8010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "R0051V1" date 12/01/2005
bios0: Sony Corporation VGN-TX770P
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT MCFG SSDT SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3)
LANC(S3) EC0_(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 type LION oem "Sony Corp."
acpiac0 at acpi0: AC unit online
acpisony0 at acpi0: SNC_
acpivideo0 at acpi0: NGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: LCD_
acpivout1 at acpivideo1: CRT_
acpivout2 at acpivideo1: TV__
acpivout3 at acpivideo1: DVI_
bios0: ROM list: 0xc0000/0x10000! 0xd8000/0x4000! 0xdc000/0x4000!
cpu0: Enhanced SpeedStep 1297 MHz: speeds: 1300, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: apic 1 int
19 (irq 10)
azalia0: codecs: Realtek ALC260, Conexant/0x2bfa, using Realtek ALC260
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 21
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 6
cbb0 at pci1 dev 5 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int 21 (irq
3)
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 5 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 5 function 3 not configured
sdhc0 at pci1 dev 5 function 4 "TI PCI7XX1 Secure Data" rev 0x00: apic 1 int 21
(irq 10)
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
fxp0 at pci1 dev 8 function 0 "Intel 82801GB LAN" rev 0x03, i82562: apic 1 int
20 (irq 10), address 00:01:4a:f6:95:7d
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
ral0 at pci1 dev 11 function 0 "Ralink RT2561" rev 0x00: apic 1 int 22 (irq
10), address 00:19:db:0f:f7:d9
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x10, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8007GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-832D, 1.61> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ubt0 at uhub3 port 1 "ALPS UGX" rev 2.00/19.15 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
ral0: device timeout
hw.sensors.acpitz0.temp0=66.90 degC (zone temperature)
hw.sensors.acpibat0.volt0=7.40 VDC (voltage)
hw.sensors.acpibat0.volt1=8.25 VDC (current voltage)
hw.sensors.acpibat0.watthour0=96.20 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=0.00 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.12 Wh (low capacity)
hw.sensors.acpibat0.watthour3=94.14 Wh (remaining capacity), OK
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
OpenBSD 4.8-beta (GENERIC) #53: Tue Jul 27 14:30:31 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.30GHz ("GenuineIntel" 686-class) 599 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063415808 (1014MB)
avail mem = 1036042240 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/05, BIOS32 rev. 0 @ 0xfd6a0, SMBIOS
rev. 2.3 @ 0xd8010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "R0051V1" date 12/01/2005
bios0: Sony Corporation VGN-TX770P
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC BOOT MCFG SSDT SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3)
LANC(S3) EC0_(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 type LION oem "Sony Corp."
acpiac0 at acpi0: AC unit offline
acpisony0 at acpi0: SNC_
acpivideo0 at acpi0: NGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: LCD_
acpivout1 at acpivideo1: CRT_
acpivout2 at acpivideo1: TV__
acpivout3 at acpivideo1: DVI_
bios0: ROM list: 0xc0000/0x10000! 0xd8000/0x4000! 0xdc000/0x4000!
cpu0: Enhanced SpeedStep 599 MHz: speeds: 1300, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: apic 1 int
19 (irq 10)
azalia0: codecs: Realtek ALC260, Conexant/0x2bfa, using Realtek ALC260
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 21
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 6
cbb0 at pci1 dev 5 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int 21 (irq
3)
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 5 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 5 function 3 not configured
fxp0 at pci1 dev 8 function 0 "Intel 82801GB LAN" rev 0x03, i82562: apic 1 int
20 (irq 10), address 00:01:4a:f6:95:7d
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
ral0 at pci1 dev 11 function 0 "Ralink RT2561" rev 0x00: apic 1 int 22 (irq
10), address 00:19:db:0f:f7:d9
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x10, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8007GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-832D, 1.61> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ubt0 at uhub3 port 1 "ALPS UGX" rev 2.00/19.15 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, power 100 mA, config 1, UGX(0x300c), ALPS(0x044e),
rev 19.15
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
>Release-Note:
>Audit-Trail:
>Unformatted:
