The Problem:
*) OpenBSD installations work fine.
*) After a reboot the bsd kernel starts and it runs into ddb.
OpenBSD 4.0 upto 4.3 works fine.
After an upgrade or newinstallation with OpenBSD 4.4, the System does
doesn't boot with the bsd and the bsd.mp kernel. the bsd.rd kernel work
fine.
Sorry i only could send the dmesg for bsd.rd.
i was not able to finde instructions to save the ddb output. (if you
can send me a link to such an instruction, i can send you the full
kernel output with more informations to the problem)
i hope this report still helps you, to find the problem.
have a nice day
bye stefan
OpenBSD 4.7 (RAMDISK_CD) #353: Wed Mar 17 21:02:53 MDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 100 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem = 24932352 (23MB)
avail mem = 15687680 (14MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/24/99
apm0 at bios0: Power Management spec V1.1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: F00F bug workaround installed
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK4313MAT>
wd0: 16-sector PIO, LBA, 4126MB, 8452080 sectors
wd0(wdc0:0:0): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1202B, 1635> ATAPI 5/cdrom
removable
cd0(wdc1:0:0): using BIOS timings
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne3 at pcmcia0 function 0 "Ethernet, Adapter, 2.0" port 0x340/32, irq 3,
address 00:e0:98:34:01:26
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask fde5 netmask fded ttymask ffff
rd0: fixed, 3800 blocks
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
