The explanation and everything is below the dmesg. It's important to
look at it to understand what's happening first.
dmesg
-------------
OpenBSD 4.8-current (GENERIC) #232: Tue Sep 7 12:58:39 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
real mem = 2134458368 (2035MB)
avail mem = 2063859712 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe83a0 (18 entries)
bios0: vendor Hewlett-Packard version "F.23" date 06/18/2010
bios0: Hewlett-Packard HP Mini 210-1100
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT SSDT HPET APIC MCFG SLIC BOOT
acpi0: wakeup devices PWRB(S4) P32_(S4) UHC1(S3) UHC2(S3) ECHI(S3)
EXP1(S5) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S4) MODM(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1662.97 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus 2 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 110 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem "Hewlett-Packard"
acpivideo0 at acpi0: OVGA
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1666, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 4 int 16 (irq 11)
azalia0: codecs: IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4
int 16 (irq 255)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 4 int 16 (irq 11), address c8:0a:a9:f3:50:56
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4
int 17 (irq 255)
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 4 int 17
(irq 10)EFUSE_CTRL=0x80008800
EEPROM rev=2, FAE=1
EEPROM region code=0xffff
BBP255=0xff
BBP255=0xff
BBP255=0xff
BBP255=0xff
BBP255=0xff
BBP255=0xff
BBP255=0xff
BBP255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
RF255=0xff
EEPROM freq offset 0
EEPROM LED mode=0x01, LEDs=0x5555/0x2221/0xa9f8
EEPROM RF rev=0x05 chains=1T1R
EEPROM CFG 0x4823
chan 1: power1=16, power2=5
chan 2: power1=15, power2=5
chan 3: power1=15, power2=5
chan 4: power1=15, power2=5
chan 5: power1=16, power2=5
chan 6: power1=16, power2=5
chan 7: power1=14, power2=5
chan 8: power1=15, power2=5
chan 9: power1=15, power2=5
chan 10: power1=15, power2=5
chan 11: power1=15, power2=5
chan 12: power1=14, power2=5
chan 13: power1=14, power2=5
chan 14: power1=16, power2=5
chan 36: power1=-1, power2=-1
chan 38: power1=-1, power2=-1
chan 40: power1=-1, power2=-1
chan 44: power1=-1, power2=-1
chan 46: power1=-1, power2=-1
chan 48: power1=-1, power2=-1
chan 52: power1=-1, power2=-1
chan 54: power1=-1, power2=-1
chan 56: power1=-1, power2=-1
chan 60: power1=-1, power2=-1
chan 62: power1=-1, power2=-1
chan 64: power1=-1, power2=-1
chan 100: power1=-1, power2=-1
chan 102: power1=-1, power2=-1
chan 104: power1=-1, power2=-1
chan 108: power1=-1, power2=-1
chan 110: power1=-1, power2=-1
chan 112: power1=-1, power2=-1
chan 116: power1=-1, power2=-1
chan 118: power1=-1, power2=-1
chan 120: power1=-1, power2=-1
chan 124: power1=-1, power2=-1
chan 126: power1=-1, power2=-1
chan 128: power1=-1, power2=-1
chan 132: power1=-1, power2=-1
chan 134: power1=-1, power2=-1
chan 136: power1=-1, power2=-1
chan 140: power1=-1, power2=-1
chan 149: power1=-1, power2=-1
chan 151: power1=-1, power2=-1
chan 153: power1=-1, power2=-1
chan 157: power1=-1, power2=-1
chan 159: power1=-1, power2=-1
chan 161: power1=-1, power2=-1
chan 165: power1=-1, power2=-1
chan 167: power1=-1, power2=-1
chan 169: power1=-1, power2=-1
chan 171: power1=-1, power2=-1
chan 173: power1=-1, power2=-1
chan 0: power1=-1, power2=-1
power compensation=0 (2GHz), 0 (5GHz)
ridx 0: power 20MHz=0xaaaa6666, 40MHz/2GHz=0xaaaa6666, 40MHz/5GHz=0xaaaa6666
ridx 1: power 20MHz=0xaaaa6688, 40MHz/2GHz=0xaaaa6688, 40MHz/5GHz=0xaaaa6688
ridx 2: power 20MHz=0xaaaa6688, 40MHz/2GHz=0xaaaa6688, 40MHz/5GHz=0xaaaa6688
ridx 3: power 20MHz=0xaaaa6688, 40MHz/2GHz=0xaaaa6688, 40MHz/5GHz=0xaaaa6688
ridx 4: power 20MHz=0xffff6688, 40MHz/2GHz=0xffff6688, 40MHz/5GHz=0xffff6688
TSSI 2GHz: 0xff 0xff 0x18 0x14 0x11 0x0d 0x09 0x06 0x01 step=1
TSSI 5GHz: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff step=255
tx mixer gain=0 (2GHz)
invalid LNA for channel group 2
invalid LNA for channel group 3
, address 70:f3:95:6d:f6:a6
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4
int 17 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4
int 19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4
int 16 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 4
int 17 (irq 10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK3256GS, LH01> SCSI3 0/direct fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
4 int 17 (irq 10)
iic0 at ichiic0
iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=c3 06=10 07=03 08=01
09=00 0a=00 0b=00 words 00=006f 01=0000 02=0000 03=0000 04=0000
05=c3a8 06=104a 07=0300
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM with thermal sensor
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 3 configuration 1 interface 0 "PNY USB 2.0 FD"
rev 2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <PNY, USB 2.0 FD, PMAP> SCSI0 0/direct removable
sd1: 3936MB, 512 bytes/sec, 8060928 sec total
uvideo0 at uhub0 port 4 configuration 1 interface 0 "QCM HP Webcam-50"
rev 2.00/1.05 addr 3
video0 at uvideo0
uslcom0 at uhub4 port 2 "Silicon Labs CP2104 USB to UART Bridge
Controller" rev 2.00/1.00 addr 2
ucom0 at uslcom0 portno 0
ubt0 at uhub3 port 2 "Ralink Technology product 0x1000" rev 2.00/52.76 addr 2
softraid0 at root
root on sd1a swap on sd1b dump on sd1b
Diff after bringing the interface up
------------------------------------
MCU command=0x31 slot=0 status=0x01
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
sending frame qid=5 wcid=255 nsegs=1 ridx=0
tx stat 0x0000ff23
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
GP timeout state=1
Before I bring the interface up, the LED that's on my netbook's rf key
(fn+F12) is turned off. While it's echoing "sending frame qid=5
wcid=255 ..." it erratically switches on and off, then when the module
gives up and starts exclusively spamming "GP timeout state=1", it turns
off completely. After doing this, the LED switches ON if a bring the
interface down!
The only way to repeat the LED oddity is if I change the mediaopt; e.g.,
% ifconfig ral0 media auto mediaopt monitor
% ifconfig ral0 media auto mediaopt ibss
I get no results when I do ifconfig ral0 scan, nor do other cards in the
vicinity pick it up when I use mediaopt hostap.
Thanks,
Fuca
