>Number: 6523
>Category: kernel
>Synopsis: IBM eserver xSeries 346 reboots, with pci.c > r1.72
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: unknown
>Arrival-Date: Mon Dec 06 14:00:01 GMT 2010
>Closed-Date:
>Last-Modified:
>Originator:
>Release:
>Organization:
>Environment:
System : OpenBSD 4.8
Details : OpenBSD 4.8-stable (GENERIC.MP) #0: Thu Nov 25 09:42:33
CET 2010
r...@host:/usr/src/sys/arch/i386/compile/GENERIC.MP
Architecture: OpenBSD.i386
Machine : i386
>Description:
When booting anything newer than OpenBSD 4.5-stable, these x346/x336
machines just reboot during the boot process. The only workaround that
can be used is to revert pci.c to 1.72, and recompile kernel.
Here is a more detailed description:
http://kerneltrap.org/mailarchive/openbsd-misc/2010/3/12/6350403/thread
http://marc.info/?l=openbsd-misc&m=125624148518228&w=2
"The issue has already been investigated and kettenis@ committed a fix
during
n2k10. However, the fix that allowed these servers to work happened to
break
other systems that were previously working, hence the change was backed
out.
I believe that an alternate fix is being worked on, however if you want
to
use this hardware in the meantime you can revert dev/pci/pci.c to
r1.72."
>How-To-Repeat:
Just install and boot OpenBSD 4.6+.
>Fix:
None, yet.
dmesg:
OpenBSD 4.8-stable (GENERIC.MP) #0: Thu Nov 25 09:42:33 CET 2010
r...@host:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem = 3220570112 (3071MB)
avail mem = 3157913600 (3011MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/11/07, BIOS32 rev. 0 @ 0xfd6a1, SMBIOS
rev. 2.3 @ 0xf8779 (55 entries)
bios0: vendor IBM version "-[KPE144AUS-1.17]-" date 09/11/2007
bios0: IBM eserver xSeries 346 -[8840EDY]-
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec84000, version 20, 24 pins
ioapic2 at mainbus0: apid 12 pa 0xfec84400, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec80000, version 20, 24 pins
ioapic4 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
acpiprt0 at acpi0: bus 3 (PCI8)
acpiprt1 at acpi0: bus 4 (PCI9)
acpiprt2 at acpi0: bus 8 (PCI6)
acpiprt3 at acpi0: bus 9 (PCI7)
acpiprt4 at acpi0: bus 1 (PCIS)
acpiprt5 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
bios0: ROM list: 0xc0000/0xb000 0xcb000/0x3800
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xff000000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
"Intel E7520 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 3
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ppb3 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci4 at ppb3 bus 5
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
apic 14 int 16 (irq 3), address 00:14:5e:a4:84:7a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 5 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 6
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101):
apic 14 int 16 (irq 3), address 00:14:5e:a4:84:7b
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci6 at ppb5 bus 7
ppb6 at pci6 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
pci7 at ppb6 bus 8
ips0 at pci7 dev 14 function 0 "Adaptec ServeRAID" rev 0x07: apic 13 int 14
(irq 10)
ips0: ServeRAID 7k, FW 7.12.02, BIOS 7.12.02, 64 cmds, 3 LDs
scsibus0 at ips0: 3 targets
sd0 at scsibus0 targ 0 lun 0: <IBM, LD0 RAID1, 1.0> SCSI2 0/direct fixed
sd0: 140013MB, 512 bytes/sec, 286746624 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM, LD1 RAID1, 1.0> SCSI2 0/direct fixed
sd1: 140013MB, 512 bytes/sec, 286746624 sec total
sd2 at scsibus0 targ 2 lun 0: <IBM, LD2 RAID0, 1.0> SCSI2 0/direct fixed
sd2: 280026MB, 512 bytes/sec, 573493248 sec total
scsibus1 at ips0: 9 targets
safte0 at scsibus1 targ 8 lun 0: <IBM, 40K6480a S320 0, 1> SCSI2 3/processor
fixed
ppb7 at pci6 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
pci8 at ppb7 bus 9
"Intel E7520 Config" rev 0x0c at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 16
(irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 int 19
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 14 int
23 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci9 at ppb8 bus 1
vga1 at pci9 dev 6 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 14 int 20 (irq 11)
drm0 at radeondrm0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4244N, 1.02> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 14
int 17 (irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 2 configuration 1 interface 0 "IBM IBM RSA2" rev
1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "IBM IBM RSA2" rev
1.10/0.01 addr 2
uhidev1: iclass 3/0
ums0 at uhidev1
ums0: X report 0x0002 not supported
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, self powered, config 1, IBM RSA2(0x4001),
IBM(0x04b3), rev 0.01, iSerialNumber 001a64e352e2
>Release-Note:
>Audit-Trail:
>Unformatted:
