On Fri, Feb 11, 2011 at 05:55:30AM -0700, [email protected] wrote:
> Synopsis: ddb when starting ral0 with new suspend/resume support
>
> State-Changed-From-To: open->closed
> State-Changed-By: pirofti
> State-Changed-When: Fri Feb 11 05:54:31 MST 2011
> State-Changed-Why:
> Fixed in -current. Tested by ratchov@.
Still causes my laptop to DDB. Same steps as before, I can manually
copy down the DDB if it would help, and will try to do that when I get
home tonight.
All I need to do to cause it to DDB is have scan in my hostname.ral0:
scan
nwid anynwid
dhcp NONE NONE NONE
Without "scan" it will work fine until I try to change the nwid at which
point the machine locks up (no mouse, no typing).
Let me know if there is something else I can do to help diagnose.
OpenBSD 4.9-beta (GENERIC) #655: Fri Feb 11 17:12:58 MST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063415808 (1014MB)
avail mem = 1035886592 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/05, BIOS32 rev. 0 @ 0xfd6a0, SMBIOS
rev. 2.3 @ 0xd8010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "R0051V1" date 12/01/2005
bios0: Sony Corporation VGN-TX770P
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT MCFG SSDT SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3)
LANC(S3) EC0_(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT1 type LION oem "Sony Corp."
acpiac0 at acpi0: AC unit online
acpisony0 at acpi0: SNC_
acpivideo0 at acpi0: NGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: LCD_
acpivout1 at acpivideo1: CRT_
acpivout2 at acpivideo1: TV__
acpivout3 at acpivideo1: DVI_
bios0: ROM list: 0xc0000/0x10000! 0xd8000/0x4000! 0xdc000/0x4000!
cpu0: Enhanced SpeedStep 1297 MHz: speeds: 1300, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: apic 1 int
19 (irq 10)
azalia0: codecs: Realtek ALC260, Conexant/0x2bfa, using Realtek ALC260
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 19
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 21
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 17
(irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 6
cbb0 at pci1 dev 5 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int 21 (irq
3)
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 5 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 5 function 3 not configured
sdhc0 at pci1 dev 5 function 4 "TI PCI7XX1 Secure Data" rev 0x00: apic 1 int 21
(irq 10)
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
fxp0 at pci1 dev 8 function 0 "Intel 82801GB LAN" rev 0x03, i82562: apic 1 int
20 (irq 10), address 00:01:4a:f6:95:7d
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
ral0 at pci1 dev 11 function 0 "Ralink RT2561" rev 0x00: apic 1 int 22 (irq
10), address 00:19:db:0f:f7:d9
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x10, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8007GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-832D, 1.61> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Trackball" rev
1.10/2.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
ubt0 at uhub3 port 1 "ALPS UGX" rev 2.00/19.15 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
hw.sensors.acpitz0.temp0=68.90 degC (zone temperature)
hw.sensors.acpibat0.volt0=7.40 VDC (voltage)
hw.sensors.acpibat0.volt1=8.29 VDC (current voltage)
hw.sensors.acpibat0.watthour0=96.20 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=0.00 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.12 Wh (low capacity)
hw.sensors.acpibat0.watthour3=96.16 Wh (remaining capacity), OK
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibat0.raw1=0 (rate)
hw.sensors.acpiac0.indicator0=On (power supply)
