You could try the patch for errata 002. http://www.openbsd.org/errata48.html
On 2011/02/21 11:22, emeric boit wrote: > Hello, > > Don't hesitate to contact me if you need more informations about this > bug. > > > Thanks for your help. > > Regards, > > Emeric. > > > ----- Message d'origine ---- > De : emeric boit <[email protected]> > @ : [email protected] > Envoyi le : Ven 4 > fivrier 2011, 15h 53min 11s > Objet : OpenBSD crash on an IBM x3550 M3 > > Hello, > After doing a clean install of OpenBSD 4.8 (AMD64) on an IBM x3550 M3, I find > the system randomly panics after a period of use. > uvm_fault(0xffffffff80cc8360, 0xffff8000149b7000, 0, 1) -> e > kernel: page > fault trap, code=0 > Stopped at mpi_reply+0x102: movq > 0(%r13),%rax > ddb{0}> > > ddb{0}> trace > mpi_reply() at mpi_reply+0x102 > mpi_intr() > at mpi_intr+0x20 > Xintr_ioapic_level18() at Xintr_ioapic_level18+0xec > --- > interrupt --- > Bad frame pointer: 0xffff8000194e1920 > end trace frame: > 0xffff8000194e1920, count: -3 > Xspllower+0xe: > ddb{0}> > > ddb{0}> dmesg > OpenBSD > 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS > diagnostic error 80<clock_battery> > real mem = 2135011328 (2036MB) > avail mem = > 2064355328 (1968MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ > 0x7f6bd000 (82 entries) > bios0: vendor IBM Corp. version "-[D6E149AUS-1.09]-" > date 09/21/2010 > bios0: IBM 69Y4438 > acpi0 at bios0: rev 2 > acpi0: sleep states > S0 S1 S5 > acpi0: tables DSDT FACP TCPA APIC MCFG SLIC HPET SSDT SSDT ERST DMAR > acpi0: wakeup devices UHC1(S4) UHC2(S4) UHC3(S4) UHC4(S4) UHC5(S4) EHC1(S4) > EHC > 2(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr > 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: > Intel(R) Xeon(R) CPU E5506 @ 2.13GHz, 2133.68 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S > SS > E3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG > cpu0: 256KB 64b/line > 8-way L2 cache > cpu0: apic clock running at 133MHz > cpu1 at mainbus0: apid 2 > (application processor) > cpu1: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz, 2133.41 > MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S > SS > E3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG > cpu1: 256KB 64b/line > 8-way L2 cache > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) > Xeon(R) CPU E5506 @ 2.13GHz, 2133.41 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S > SS > E3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG > cpu2: 256KB 64b/line > 8-way L2 cache > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) > Xeon(R) CPU E5506 @ 2.13GHz, 2133.41 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C > FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,S > SS > E3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,NXE,LONG > cpu3: 256KB 64b/line > 8-way L2 cache > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins > acpihpet0 at > acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 11 > (PCI1) > acpiprt2 at acpi0: bus 21 (PCI3) > acpiprt3 at acpi0: bus -1 (PCI6) > acpiprt4 at acpi0: bus 31 (PCI7) > acpiprt5 at acpi0: bus -1 (PCI9) > acpicpu0 at > acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > ipmi at mainbus0 > not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel > 5520 Host" rev 0x22 > ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x22 > pci1 at ppb0 bus 11 > bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: > apic 9 int 4 (irq 11 > ) > bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev > 0x20: apic 9 int 16 (irq 1 > 0) > ppb1 at pci0 dev 2 function 0 "Intel X58 PCIE" > rev 0x22 > pci2 at ppb1 bus 16 > ppb2 at pci0 dev 3 function 0 "Intel X58 PCIE" > rev 0x22 > pci3 at ppb2 bus 21 > ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" > rev 0x22 > pci4 at ppb3 bus 26 > ppb4 at pci0 dev 7 function 0 "Intel X58 PCIE" > rev 0x22: apic 9 int 6 (irq 11) > pci5 at ppb4 bus 31 > "Intel I340-T4 (82580)" > rev 0x01 at pci5 dev 0 function 0 not configured > "Intel I340-T4 (82580)" rev > 0x01 at pci5 dev 0 function 1 not configured > "Intel I340-T4 (82580)" rev 0x01 > at pci5 dev 0 function 2 not configured > "Intel I340-T4 (82580)" rev 0x01 at > pci5 dev 0 function 3 not configured > "Intel X58 QuickPath" rev 0x22 at pci0 > dev 16 function 0 not configured > "Intel X58 QuickPath" rev 0x22 at pci0 dev 16 > function 1 not configured > "Intel X58 QuickPath" rev 0x22 at pci0 dev 17 > function 0 not configured > "Intel X58 QuickPath" rev 0x22 at pci0 dev 17 > function 1 not configured > "Intel X58 Misc" rev 0x22 at pci0 dev 20 function 0 > not configured > "Intel X58 GPIO" rev 0x22 at pci0 dev 20 function 1 not > configured > "Intel X58 RAS" rev 0x22 at pci0 dev 20 function 2 not configured > "Intel X58 Throttle" rev 0x22 at pci0 dev 20 function 3 not configured > vendor > "Intel", unknown product 0x342f (class system subclass interrupt, rev 0x > 22) > at pci0 dev 21 function 0 not configured > "Intel X58 QuickData" rev 0x22 at > pci0 dev 22 function 0 not configured > "Intel X58 QuickData" rev 0x22 at pci0 > dev 22 function 1 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 2 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 3 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 4 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 5 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 6 not configured > "Intel X58 QuickData" rev 0x22 at pci0 dev 22 > function 7 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" > rev 0x00: apic 8 int 17 (ir > q 10) > uhci1 at pci0 dev 26 function 1 "Intel > 82801JI USB" rev 0x00: apic 8 int 18 (ir > q 7)ehci0 at pci0 dev 26 function 7 > "Intel 82801JI USB" rev 0x00: apic 8 int 19 > (ir > q 5) > usb0 at ehci0: USB > revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at > pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 8 int 16 (ir > q 11) > pci6 at ppb5 bus 1 > mpi0 at pci6 dev 0 function 0 "Symbios Logic SAS1064E" rev > 0x08: apic 8 int 16 ( > irq 11) > scsibus0 at mpi0: 112 targets > sd0 at scsibus0 > targ 1 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct f > ixed > sd0: > 69618MB, 512 bytes/sec, 142577664 sec total > ppb6 at pci0 dev 28 function 4 > "Intel 82801JI PCIE" rev 0x00 > pci7 at ppb6 bus 6 > ppb7 at pci7 dev 0 function 0 > unknown vendor 0x101b product 0x0452 rev 0x01 > pci8 at ppb7 bus 7 > vga1 at pci8 > dev 0 function 0 vendor "Matrox", unknown product 0x0530 rev 0x00 > wsdisplay0 > at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added > (80x25, vt100 emulation) > uhci2 at pci0 dev 29 function 0 "Intel 82801JI USB" > rev 0x00: apic 8 int 17 (ir > q 10) > uhci3 at pci0 dev 29 function 1 "Intel > 82801JI USB" rev 0x00: apic 8 int 18 (ir > q 7) > uhci4 at pci0 dev 29 function 2 > "Intel 82801JI USB" rev 0x00: apic 8 int 19 (ir > q 5) > ehci1 at pci0 dev 29 > function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 17 (ir > q 10) > usb1 at > ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr > 1 > ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 > pci9 at > ppb8 bus 36 > pcib0 at pci0 dev 31 function 0 "Intel 82801JIB LPC" rev 0x00 > pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel > 0 > configured to native-PCI, channel 1 configured to native-PCI > pciide0: using > apic 8 int 16 (irq 11) for native-PCI interrupt > atapiscsi0 at pciide0 channel > 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: > <MATSHITA, DVD-RAM UJ890, SAA5> ATAPI 5/cdrom rem > ovable > cd0(pciide0:0:0): > using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel > 82801JI SMBus" rev 0x00: apic 8 int 22 > (irq 11) > iic0 at ichiic0 > iic0: addr > 0x2e 00=40 words 00=4040 01=0000 02=0000 03=0000 04=0000 05=0000 06= > 0000 > 07=0000 > pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, > channel 0 > wired to native-PCI, channel 1 wired to native-PCI > pciide1: using > apic 8 int 21 (irq 11) for native-PCI interrupt > usb2 at uhci0: USB revision > 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: > USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 > at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 > addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI > root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port > 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 > irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd > slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, > using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro > MTRR support > cdce0 at uhub4 port 2 configuration 1 interface 0 "IBM RNDIS/CDC > ETHER" rev 2.0 > 0/2.15 addr 2 > cdce0: address e6:1f:13:5e:ff:77 > uhidev0 at uhub6 > port 2 configuration 1 interface 0 "Avocent Dell 03R874" rev 1 > .10/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country > code 33 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at > uhub6 port 2 configuration 1 interface 1 "Avocent Dell 03R874" rev 1 > .10/1.00 > addr 2 > uhidev1: iclass 3/1, 3 report ids > ums0 at uhidev1 reportid 1: 5 > buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=2, > output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > bnx0: address > e4:1f:13:6c:ff:74 > brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 > bnx1: address e4:1f:13:6c:ff:76 > brgphy1 at bnx1 phy 1: BCM5709 > 10/100/1000baseT PHY, rev. 8 > > > With the OpenBSD 4.9 snapshot (Jan. 2011) the > problem is the same : > > uvm_fault(0xffffffff80cef780, 0xffff80001b6fe000, 0, 1) > -> e > kernel: page fault trap, code=0 > Stopped at mpi_reply+0xd0: movq > 0x10(%r13),%rdx > ddb{0}> > > ddb{0}> trace > mpi_reply() at mpi_reply+0xd0 > mpi_intr() at mpi_intr+0x20 > Xintr_ioapic_level18() at > Xintr_ioapic_level18+0xec > --- interrupt --- > Bad frame pointer: > 0xffff80001942dac0 > end trace frame: 0xffff80001942dac0, count: -3 > Xspllower+0xe: > ddb{0}> > > ddb{0}> dmesg > OpenBSD 4.9-beta (GENERIC.MP) #780: Thu > Jan 20 17:21:34 MST 2011 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Thanks for > your help. > > Regards, > > Emeric.
