>Synopsis: Not possible to burn: cdio: ioctl failed while attempting
to write: Cannot allocate memory
>Category: System
>Environment:
System : OpenBSD 4.9
Details : OpenBSD 4.9-current (GENERIC.MP) #832: Mon Mar 14
12:02:17 MDT 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
Both cdrecord and cdio will fail to burn a CD with the same
errormessage:
$ cdio -f cd0c tao tmp/install49.iso
cdio: ioctl failed while attempting to write: Cannot allocate memory
Closing session.
>How-To-Repeat:
On this hardware that i am having, every single attempt will fail.
I am running snapshots of amd64.
>Fix:
No known way to fix
dmesg:
OpenBSD 4.9-current (GENERIC.MP) #832: Mon Mar 14 12:02:17 MDT 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3144155136 (2998MB)
avail mem = 3046428672 (2905MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfd110 (66 entries)
bios0: vendor American Megatrends Inc. version "V1.3" date 12/21/2009
bios0: MSI MS-7636
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI DMAR SSDT
acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4)
BR1E(S4) PS2K(S4) PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
USB5(S4) USB6(S4) BR20(S4) BR21(S4) BR22(S4) BR23(S4) BR24(S4) BR25(S4)
BR26(S4) BR27(S4) GBE_(S4) EUSB(S4) USBE(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3193.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3192.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3192.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3192.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (BR1E)
acpiprt2 at acpi0: bus 1 (BR20)
acpiprt3 at acpi0: bus -1 (BR21)
acpiprt4 at acpi0: bus 2 (BR22)
acpiprt5 at acpi0: bus -1 (BR23)
acpiprt6 at acpi0: bus -1 (BR24)
acpiprt7 at acpi0: bus -1 (BR25)
acpiprt8 at acpi0: bus -1 (BR26)
acpiprt9 at acpi0: bus -1 (BR27)
acpicpu0 at acpi0: C3, C3, C1, PSS
acpicpu1 at acpi0: C3, C3, C1, PSS
acpicpu2 at acpi0: C3, C3, C1, PSS
acpicpu3 at acpi0: C3, C3, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3067, 2933, 2800,
2667, 2533, 2400, 2267, 2133, 2000, 1867, 1733, 1600, 1467, 1333, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x12
vga1 at pci0 dev 2 function 0 "Intel HD graphics" rev 0x12
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 6 int 16 (irq 11)
drm0 at inteldrm0
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 6 int 16
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 6
int 22 (irq 15)
azalia0: codecs: Realtek/0x0889, Intel/0x2804, using Realtek/0x0889
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 6 int 17
(irq 5)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 6 int 16 (irq 11), address 40:61:86:85:32:b4
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x06: apic 6 int 18
(irq 10)
pci2 at ppb1 bus 2
jmb0 at pci2 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 6 int 18 (irq 10) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 6 int 23
(irq 7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel H55 LPC" rev 0x06
pciide1 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x06: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 6 int 19 (irq 14) for native-PCI interrupt
atapiscsi0 at pciide1 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S223L, SB02> ATAPI
5/cdrom removable
cd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 6
int 18 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
pciide2 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x06: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 6 int 19 (irq 14) for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <ST3320613AS>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide2 channel 1 drive 0: <ST3320613AS>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "CHICONY USB
Keyboard" rev 1.10/3.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "CHICONY USB
Keyboard" rev 1.10/3.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=2
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 3 configuration 1 interface 0 "Logitech USB
Receiver" rev 1.10/23.02 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
ulpt0 at uhub2 port 4 configuration 1 interface 0 "Hewlett-Packard hp
LaserJet 1300" rev 1.10/1.00 addr 5
ulpt0: using bi-directional mode
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <OPENBSD, SR RAID 1, 004> SCSI2 0/direct fixed
sd0: 281145MB, 512 bytes/sec, 575785137 sec total
root on wd0a swap on wd0b dump on wd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 addr 3: low speed, power 100 mA, config 1, USB
Keyboard(0x0111), CHICONY(0x04f2), rev 3.00
port 3 addr 4: low speed, power 50 mA, config 1, USB
Receiver(0xc50d), Logitech(0x046d), rev 23.02
port 4 addr 5: full speed, self powered, config 1, hp LaserJet
1300(0x1017), Hewlett-Packard(0x03f0), rev 1.00, iSerialNumber 00CNCD539260
port 5 powered
port 6 powered
port 2 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
