I use a temp user to login via ssh and after, use su to be root. Once
I'm root, if I try to change the password with passwd command, instead
of changing the root password, it change the password of my temp user.
Typing "whoami" tell me I'm root.
I try "su" and "su -" and have the same result with both. I try 4.8 and
4.9 version, both do the same.
I don't think dmesg output is needed in this case but anyway :
OpenBSD 4.9 (GENERIC.MP) #819: Wed Mar 2 06:57:49 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2135490560 (2036MB)
avail mem = 2064617472 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f800 (22 entries)
bios0: vendor American Megatrends Inc. version "080016" date 03/04/2011
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P1(S4) PS2K(S4) PS2M(S4) USB0(S4) USB1(S4)
USB2(S4) USB3(S4) EUSB(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4)
P0P9(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1500.22 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU N550 @ 1.50GHz, 1499.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 4
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus 2 (P0P5)
acpiprt4 at acpi0: bus 3 (P0P6)
acpiprt5 at acpi0: bus 4 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 1499 MHz: speeds: 1500, 1000 MHz
pci0 at mainbus0 bus 0
mem address conflict 0xfc00/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 4 int 16 (irq 11)
azalia0: codecs: VIA/0x4397
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int
16 (irq 11)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int
17 (irq 5)
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 4 int 17 (irq 5), address 00:30:18:a0:f7:81
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int
18 (irq 11)
pci3 at ppb2 bus 3
re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E
(0x2c00), apic 4 int 18 (irq 11), address 00:30:18:a0:f7:82
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int
19 (irq 11)
pci4 at ppb3 bus 4
jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x10
ahci0 at jmb0: apic 4 int 19 (irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, INTEL SSDSA2CT04, 4PC1> SCSI3
0/direct fixed
sd0: 38166MB, 512 bytes/sec, 78165360 sec total
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 4 int 19 (irq 11) for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int
23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int
19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int
18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int
23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
re2 at pci5 dev 4 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 4 int 18 (irq 11), address 00:30:18:ae:31:25
rgephy2 at re2 phy 7: RTL8169S/8110S PHY, rev. 2
re3 at pci5 dev 6 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 4 int 19 (irq 11), address 00:30:18:ae:31:26
rgephy3 at re3 phy 7: RTL8169S/8110S PHY, rev. 2
re4 at pci5 dev 7 function 0 "Realtek 8169SC" rev 0x10: RTL8169/8110SCd
(0x1800), apic 4 int 16 (irq 11), address 00:30:18:ae:31:27
rgephy4 at re4 phy 7: RTL8169S/8110S PHY, rev. 2
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 19 (irq 0) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB Entry
Keyboard" rev 1.10/1.78 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.06 addr 3
uhidev1: iclass 3/1
ukbd1 at uhidev1: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--
Michel Blais
Administrateur riseau
Targo Communications
514-448-0773
