>Synopsis: onboard SCSI throws errors on Ultra 2 (and Ultra 1E)
>Category: sparc64
>Environment:
System : OpenBSD 5.0
Details : OpenBSD 5.0 (GENERIC) #36: Wed Aug 17 10:13:34
MDT 2011
[email protected]:/usr/src/sys/arch/sparc64/c
ompile/GENERIC
Architecture: OpenBSD.sparc64
Machine : sparc64
>Description:
Onboard SCSI adapter (esp FAS366/HME) throws repeated illegal
command error messages when used.
This started after 4.7 release. (4.7 release didn't have this
problem, each release afterward has the problem including 5.0,
and presumably current).
>How-To-Repeat:
Boot a kernel (RAMDISK or GENERIC) and errors will appear.
Happens both on an Ultra 2 and Ultra 1E.
>Fix:
No fix known.
dmesg:
OpenBSD 5.0 (GENERIC) #36: Wed Aug 17 10:13:34 MDT 2011
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 516014080 (492MB)
mainbus0 at root: Sun Ultra 2 UPA/SBus (UltraSPARC-II 296MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 2.0) @ 295.992 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b
/l)
timer0 at mainbus0 addr 0xfffc3c00 ivec 0x7f0, 0x7f1
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
sbus0: dvma map ff800000-ffffffff, STC0 enabled
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
"flashprom" at sbus0 slot 15 offset 0x0 not configured
fdc0 at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 softpri 4
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
clock1 at sbus0 slot 15 offset 0x1200000: mk48t59
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0: console output
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0: no keyboard
zsms0 at zs1 channel 1
wsmouse0 at zsms0 mux 0
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-mp (0/3) ports 4
"SUNW,pll" at sbus0 slot 15 offset 0x1304000 not configured
dma0 at sbus0 slot 1 offset 0x100000: dma rev 1+
esp0 at sbus0 slot 1 offset 0x200000 vector 3 ipl 3: ESP100A, 25MHz
scsibus0 at esp0: 8 targets, initiator 7
sd0 at scsibus0 targ 2 lun 0: <SEAGATE, SX118273LC, 6678> SCSI2 0/direct
fixed
sd0: 17366MB, 512 bytes/sector, 35566480 sectors
esp1 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: dma rev fas
esp1: FAS366/HME, 40MHz
scsibus1 at esp1: 16 targets, initiator 7
sd1 at scsibus1 targ 0 lun 0: <IBM, DPSS-318350M, S93E> SCSI3 0/direct
fixed naa
.5005076103d31060
esp1: illegal command: 0x42 (state 2, phase 7, prevphase 3)
esp1: SCSI bus reset
sd2 at scsibus1 targ 1 lun 0: <FUJITSU, MAN3367MC, 5508> SCSI3 0/direct
fixed
esp1: illegal command: 0x42 (state 2, phase 3, prevphase 3)
esp1: SCSI bus reset
cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> SCSI2
5/cdrom re
movable
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6, address
08:00:20:a1:69:f
a
nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev unknown
(0x20000
000)
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
esp1: illegal command: 0x42 (state 2, phase 7, prevphase 3)
esp1: SCSI bus reset
esp1: illegal command: 0x42 (state 2, phase 3, prevphase 3)
esp1: SCSI bus reset
bootpath: /sbus@1f,0/esp@1,200000/sd@2,0
root on sd0a swap on sd0b dump on sd0b
usbdevs:
usbdevs: no USB controllers found
pcidump:
acpidump:
