Hello list,
maybe I have found a bug in OpenBSD current #90 and later. In short:
# dd if=winxp1.8.ova of=/dev/null
dd: winxp1.8.ova: Invalid argument
4194303+0 records in
4194303+0 records out
2147483136 bytes transferred in 116.564 secs (18423057 bytes/sec)
Please have a look at:
http://www.daemonforums.org/showthread.php?t=6551
It's fixed after a downgrade to 5.0 stable release.
Sorry for the lack of diagnostic information.
Pieter Verberne
Nov 16 21:31:13 lilium /bsd: OpenBSD 5.0-current (GENERIC) #90: Mon Nov
14 10:51:46 MST 2011
Nov 16 21:31:13 lilium /bsd:
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
Nov 16 21:31:13 lilium /bsd: cpu0: Geode(TM) Integrated Processor by
AMD PCS ("AuthenticAMD" 586-class) 500 MHz
Nov 16 21:31:13 lilium /bsd: cpu0:
FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
Nov 16 21:31:13 lilium /bsd: real mem = 536408064 (511MB)
Nov 16 21:31:13 lilium /bsd: avail mem = 517558272 (493MB)
Nov 16 21:31:13 lilium /bsd: mainbus0 at root
Nov 16 21:31:13 lilium /bsd: bios0 at mainbus0: AT/286+ BIOS, date
20/70/03, BIOS32 rev. 0 @ 0xfac40
Nov 16 21:31:13 lilium /bsd: pcibios0 at bios0: rev 2.0 @
0xf0000/0x10000
Nov 16 21:31:13 lilium /bsd: pcibios0: pcibios_get_intr_routing -
function not supported
Nov 16 21:31:13 lilium /bsd: pcibios0: PCI IRQ Routing information
unavailable.
Nov 16 21:31:13 lilium /bsd: pcibios0: PCI bus #0 is the last bus
Nov 16 21:31:13 lilium /bsd: bios0: ROM list: 0xc8000/0xa800
Nov 16 21:31:13 lilium /bsd: cpu0 at mainbus0: (uniprocessor)
Nov 16 21:31:13 lilium /bsd: amdmsr0 at mainbus0
Nov 16 21:31:13 lilium /bsd: pci0 at mainbus0 bus 0: configuration mode
1 (bios)
Nov 16 21:31:13 lilium /bsd: io address conflict 0x6100/0x100
Nov 16 21:31:13 lilium /bsd: io address conflict 0x6200/0x200
Nov 16 21:31:13 lilium /bsd: pchb0 at pci0 dev 1 function 0 "AMD Geode
LX" rev 0x33
Nov 16 21:31:13 lilium /bsd: glxsb0 at pci0 dev 1 function 2 "AMD Geode
LX Crypto" rev 0x00: RNG AES
Nov 16 21:31:13 lilium /bsd: vr0 at pci0 dev 6 function 0 "VIA VT6105M
RhineIII" rev 0x96: irq 11, address 00:00:24:cd:7d:f8
Nov 16 21:31:13 lilium /bsd: ukphy0 at vr0 phy 1: Generic IEEE 802.3u
media interface, rev. 3: OUI 0x004063, model 0x0034
Nov 16 21:31:13 lilium /bsd: vr1 at pci0 dev 7 function 0 "VIA VT6105M
RhineIII" rev 0x96: irq 5, address 00:00:24:cd:7d:f9
Nov 16 21:31:13 lilium /bsd: ukphy1 at vr1 phy 1: Generic IEEE 802.3u
media interface, rev. 3: OUI 0x004063, model 0x0034
Nov 16 21:31:13 lilium /bsd: vr2 at pci0 dev 8 function 0 "VIA VT6105M
RhineIII" rev 0x96: irq 9, address 00:00:24:cd:7d:fa
Nov 16 21:31:13 lilium /bsd: ukphy2 at vr2 phy 1: Generic IEEE 802.3u
media interface, rev. 3: OUI 0x004063, model 0x0034
Nov 16 21:31:13 lilium /bsd: vr3 at pci0 dev 9 function 0 "VIA VT6105M
RhineIII" rev 0x96: irq 12, address 00:00:24:cd:7d:fb
Nov 16 21:31:13 lilium /bsd: ukphy3 at vr3 phy 1: Generic IEEE 802.3u
media interface, rev. 3: OUI 0x004063, model 0x0034
Nov 16 21:31:13 lilium /bsd: ral0 at pci0 dev 17 function 0 "Ralink
RT2561S" rev 0x00: irq 15, address 00:12:0e:61:48:98
Nov 16 21:31:13 lilium /bsd: ral0: MAC/BBP RT2561C, RF RT5225
Nov 16 21:31:13 lilium /bsd: glxpcib0 at pci0 dev 20 function 0 "AMD
CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, wat
chdog, gpio
Nov 16 21:31:13 lilium /bsd: gpio0 at glxpcib0: 32 pins
Nov 16 21:31:13 lilium /bsd: pciide0 at pci0 dev 20 function 2 "AMD
CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibili
ty, channel 1 wired to compatibility
Nov 16 21:31:13 lilium /bsd: wd0 at pciide0 channel 0 drive 1: <WDC
WD5000BPVT-24HXZT3>
Nov 16 21:31:13 lilium /bsd: wd0: 16-sector PIO, LBA48, 476940MB,
976773168 sectors
Nov 16 21:31:13 lilium /bsd: wd0(pciide0:0:1): using PIO mode 4,
Ultra-DMA mode 2
Nov 16 21:31:13 lilium /bsd: pciide0: channel 1 ignored (disabled)
Nov 16 21:31:13 lilium /bsd: ohci0 at pci0 dev 21 function 0 "AMD
CS5536 USB" rev 0x02: irq 7, version 1.0, legacy support
Nov 16 21:31:13 lilium /bsd: ehci0 at pci0 dev 21 function 1 "AMD
CS5536 USB" rev 0x02: irq 7
Nov 16 21:31:13 lilium /bsd: usb0 at ehci0: USB revision 2.0
Nov 16 21:31:13 lilium /bsd: uhub0 at usb0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
Nov 16 21:31:13 lilium /bsd: isa0 at glxpcib0
Nov 16 21:31:13 lilium /bsd: isadma0 at isa0
Nov 16 21:31:13 lilium /bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a,
16 byte fifo
Nov 16 21:31:13 lilium /bsd: com0: console
Nov 16 21:31:13 lilium /bsd: com1 at isa0 port 0x2f8/8 irq 3: ns16550a,
16 byte fifo
Nov 16 21:31:13 lilium /bsd: pckbc0 at isa0 port 0x60/5
Nov 16 21:31:13 lilium /bsd: pckbd0 at pckbc0 (kbd slot)
Nov 16 21:31:13 lilium /bsd: pckbc0: using irq 1 for kbd slot
Nov 16 21:31:13 lilium /bsd: wskbd0 at pckbd0: console keyboard
Nov 16 21:31:13 lilium /bsd: pcppi0 at isa0 port 0x61
Nov 16 21:31:13 lilium /bsd: spkr0 at pcppi0
Nov 16 21:31:13 lilium /bsd: nsclpcsio0 at isa0 port 0x2e/2: NSC
PC87366 rev 9: GPIO VLM TMS
Nov 16 21:31:13 lilium /bsd: gpio1 at nsclpcsio0: 29 pins
Nov 16 21:31:13 lilium /bsd: npx0 at isa0 port 0xf0/16: reported by
CPUID; using exception 16
Nov 16 21:31:13 lilium /bsd: usb1 at ohci0: USB revision 1.0
Nov 16 21:31:13 lilium /bsd: uhub1 at usb1 "AMD OHCI root hub" rev
1.00/1.00 addr 1
Nov 16 21:31:13 lilium /bsd: mtrr: K6-family MTRR support (2 registers)
Nov 16 21:31:13 lilium /bsd: umass0 at uhub0 port 1 configuration 1
interface 0 "JMicron USB to ATA/ATAPI Bridge" rev 2.00/1.
00 addr 2
Nov 16 21:31:13 lilium /bsd: umass0: using SCSI over Bulk-Only
Nov 16 21:31:13 lilium /bsd: scsibus0 at umass0: 2 targets, initiator 0
Nov 16 21:31:13 lilium /bsd: sd0 at scsibus0 targ 1 lun 0: <SAMSUNG,
HM320II, 01C4> SCSI2 0/direct fixed serial.152d233831844
D33B002
Nov 16 21:31:13 lilium /bsd: sd0: 305245MB, 512 bytes/sector, 625142448
sectors
Nov 16 21:31:13 lilium /bsd: vscsi0 at root
Nov 16 21:31:13 lilium /bsd: scsibus1 at vscsi0: 256 targets
Nov 16 21:31:13 lilium /bsd: softraid0 at root
Nov 16 21:31:13 lilium /bsd: scsibus2 at softraid0: 256 targets
Nov 16 21:31:13 lilium /bsd: root on wd0a (3816f9d79a94aadf.a) swap on
wd0b dump on wd0b
