Hi,
I noticed that my laptops USB-ports won't work after resuming my
Thinkpad from suspended state.
I have my laptop in docking station and the dock USB-ports work just fine.
During suspend my laptop USB-ports seem to be powered (LED is on my
USB-stick) and after resume they aren't.
Dock USB-port doesn't give power to my USB-stick during suspend.
Without dock the USB-stick port isn't powered during suspend but won't
be powered after resume either.
Here's dmesg and usbdevs -v output:
OpenBSD 5.0-current (GENERIC.MP) #134: Wed Nov 16 15:43:25 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4078419968 (3889MB)
avail mem = 3955716096 (3772MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET35WW (1.05 )" date 01/26/2010
bios0: LENOVO 32492EU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4)
EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.40 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4647" serial 3122 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK docked (15)
cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2534, 2533, 2399, 2266,
2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Mobile HD graphics" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
"Intel 3400 KT" rev 0x06 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: msi, address
00:26:2d:f1:da:75
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci1 at ppb0 bus 13
ppb1 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: msi
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: msi
pci3 at ppb2 bus 2
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev
0x35: msi, MIMO 2T2R, MoW, address 00:23:14:23:6e:18
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3
ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY>
ahci0: CLO did not complete
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2M160, 2CV1> SCSI3
0/direct fixed naa.5001517959106b36
sd0: 152627MB, 512 bytes/sector, 312581808 sectors, thin
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1 int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/3.60 addr 4
uhub3 at uhub2 port 5 "vendor 0x17ef product 0x1005" rev 2.00/0.01 addr 5
uhub4 at uhub3 port 2 "NEC hub" rev 2.00/1.00 addr 6
uhidev0 at uhub4 port 4 configuration 1 interface 0 "Holtek USB
Keyboard" rev 1.10/3.90 addr 7
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 4 configuration 1 interface 1 "Holtek USB
Keyboard" rev 1.10/3.90 addr 7
uhidev1: iclass 3/1, 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub4 port 4 configuration 1 interface 2 "Holtek USB
Keyboard" rev 1.10/3.90 addr 7
uhidev2: iclass 3/1
ums0 at uhidev2: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub5 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (e4d74d12b8097b9d.a) swap on sd0b dump on sd0b
umass0 at uhub2 port 2 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
sd1 detached
scsibus3 detached
umass0 detached
ugen0 detached
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 detached
ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/3.60 addr 4
umass0 at uhub3 port 1 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
sd1 detached
scsibus3 detached
umass0 detached
umass0 at uhub3 port 1 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
sd1 detached
scsibus3 detached
umass0 detached
umass0 at uhub3 port 3 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
sd1 detached
scsibus3 detached
umass0 detached
umass0 at uhub3 port 1 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
ugen0 detached
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 detached
ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/3.60 addr 4
sd1 detached
scsibus3 detached
umass0 detached
umass0 at uhub3 port 1 configuration 1 interface 0 "Silicon Integrated
Systems Corp. USB Mass Storage Device" rev 2.00/1.00 addr 8
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <OCZ, ET1208AD, 1.0> SCSI2 0/direct
removable serial.0457015195e566d54535
sd1: 2000MB, 512 bytes/sector, 4096000 sectors
# USB devs after boot stick attached to laptop port
usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 addr 8: high speed, power 98 mA, config 1, USB Mass Storage
Device(0x0151), Silicon Integrated Systems Corp.(0x0457), rev 1.00,
iSerialNumber 6e95e566d54535
port 3 addr 3: full speed, power 100 mA, config 1, Biometric
Coprocessor(0x2016), UPEK(0x147e), rev 0.02
port 4 addr 4: full speed, self powered, config 1, Broadcom
Bluetooth Device(0x217f), Broadcom Corp(0x0a5c), rev 3.60,
iSerialNumber C417FEECDD77
port 5 addr 5: high speed, self powered, config 1, product
0x1005(0x1005), vendor 0x17ef(0x17ef), rev 0.01
port 1 powered
port 2 addr 6: high speed, self powered, config 1, hub(0x005a),
NEC(0x0409), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 addr 7: low speed, power 100 mA, config 1, USB
Keyboard(0x2011), Holtek(0x04d9), rev 3.90
port 3 powered
port 4 powered
port 6 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
port 3 powered
# After resume attached to dock USB-port
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 addr 3: full speed, power 100 mA, config 1, Biometric
Coprocessor(0x2016), UPEK(0x147e), rev 0.02
port 4 addr 4: full speed, self powered, config 1, Broadcom
Bluetooth Device(0x217f), Broadcom Corp(0x0a5c), rev 3.60,
iSerialNumber C417FEECDD77
port 5 addr 5: high speed, self powered, config 1, product
0x1005(0x1005), vendor 0x17ef(0x17ef), rev 0.01
port 1 addr 8: high speed, power 98 mA, config 1, USB Mass Storage
Device(0x0151), Silicon Integrated Systems Corp.(0x0457), rev 1.00,
iSerialNumber 6e95e566d54535
port 2 addr 6: high speed, self powered, config 1, hub(0x005a),
NEC(0x0409), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 addr 7: low speed, power 100 mA, config 1, USB
Keyboard(0x2011), Holtek(0x04d9), rev 3.90
port 3 powered
port 4 powered
port 6 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, Rate Matching
Hub(0x0020), Intel(0x8087), rev 0.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 2 powered
port 3 powered
